Cts Klimaprüfschrank Su Drėgme 350 Litrų pirkti naudotą (10 409)

Būklė: geras (naudotas), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS cabinet series is structured as follows: Example: Type TSR-30/1000 1) T stands for: Temperature 2) S stands for: Stress-Screening 3) R stands for: External Conditioning 4) -30 stands for: minimum temperature -30°C 5) 1000 stands for: 1000 liters of test chamber volume Technical Specifications: A) TSR-30/1000 Base Unit without hose connections, i.e., when used as a standalone temperature test chamber Temperature Tests: - Temperature range: -40°C to +180°C - Ultimate temperature: -45°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: * Heating: 6.0 K/min * Cooling: 5.0 K/min - Heat radiation: * Approx. 5000 W at +20°C * Approx. 4200 W at ±0°C * Approx. 3000 W at -20°C The technical data are based on an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without radiation, and without additional equipment. Air Flow Volume: approx. 2000 m³/h B) TSR-30/1000 Base Unit with hose connections, for connection to an external customer-supplied test chamber Temperature Tests: - Temperature range: -30°C to +170°C - Temperature deviation: ≤ ±0.1 to 0.5 K over time - Average temperature change rate, measured in closed-loop: * Heating: 4.0 K/min * Cooling: 4.0 K/min (in the range of +150°C to -10°C) The technical data are based on an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without radiation, and without additional equipment, measured in closed-loop mode. Note: The external, customer-supplied test chamber must be absolutely airtight and properly insulated. Any feedthroughs must be optimally sealed by the customer. Dimensions: - Test volume: 1000 liters - Air recirculation connection Ø 200 mm - Chamber internal dimensions: Height 900 mm x Width 1000 mm x Depth 1100 mm - External dimensions: Height 1950 mm x Width 1270 mm x Depth 2245 mm Technical Design: Refrigeration Unit: - Water-cooled, low-noise, fully hermetic - Stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R404A Door: - Fully openable door, left-hinged - One-hand operation, lockable Insert Rack: Iaodporivfcefx Alrsu - Stainless steel, shelf area 970 x 980 mm - Maximum load per rack: 35 kg - Total load with maximum rack configuration: 100 kg Chamber Lighting: Halogen lamp 20 W, 12 V Control System: - 32-bit controller - LCD control panel Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, 50 Hz - Rated power: 13.3 kW - Protection class: IP 22 - Sound pressure level: < 60 dB(A) - Weight: approx. 850 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and technical data errors! Information is provided without guarantee.) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of target and actual values - Numerical input of target values - Error messages in plain text Iajdpfxeu U Ixmj Alreu - RS 232 interface - Free switching channels for external specimen control Technical Specifications Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat emission: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Nominal power: 8.8 kW Nominal current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: geras (naudotas), CTS Model: T-70/600/S Water-cooled temperature test chamber Refrigerant: Converted to R-452A Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text Iedpfxovitmds Alroau - RS 232 interface - Free switching channels for customer-specific DUT control Technical Data Temperature testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, no heat radiation, and without additional equipment. Dimensions: Test chamber volume: 600 liters Internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, the following information! The following work is carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data, specifications reserved!) For further questions, feel free to contact us by phone.

Būklė: naudotas, CTS Type: TS -70/600-13 Water-cooled climatic test chamber Series: TS -70/600-13 Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side specimen control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 2250 mm, Width approx. 1300 mm, Depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from +120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Iajdpfx Aevcyawjlrju Electrical connection: 400 V / 3P / N / PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y / 4PC-10.2Y Refrigerant: R-404A / R-23 Weight: 1350 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Būklė: geras (naudotas), Type: TS -70/1000-10 For sale: CTS Temperature Test Chamber Model: TS -70/1000-10 Cooling: Water-cooled refrigeration unit, Iaedpfsxdi Ezox Alrju Compressor has been replaced! Features: - Multi-touch control panel - USB and Ethernet interfaces - Feed-throughs for test cables (4 × Ø 125 mm) - Safety temperature limiter Areas of application: - Environmental and endurance testing - Thermal cycling (stress screening) - Quality assurance and R&D - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: Height approx. 1,000 mm, Width approx. 860 mm, Depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, Width approx. 1,270 mm, Depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ±0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note the following! The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and data may be subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Būklė: beveik kaip naujas (naudotas), Darbo matmenys: Skersmuo: 1,80 m Aukštis: 1,70 m Katilai turi garinio apvalkalo kamerą, kuri veikia kaip šildymo kamera – ji apgaubia indą, o šiluma tam tikru slėgiu tolygiai pasiskirsto ratu. Garas tiekiamas iš katilo. Paprastai naudojamas pramoniniu mastu maistingam maistui, uogienėms, želė, šokoladui, saldainiams, konservams, mėsai, padažams ir kt. apdoroti. Isdezbi Rmepfx Alreau

Būklė: naujas, TECHNICAL DATA: - Footprint: 10,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Upper edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanines can be extended in the specified grid as standard. Other sizes and heights available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Flooring - Fastening materials Price examples: 30 m² | Area: 5,000 x 6,000 mm | €2,685.00 net, plus transport costs and VAT 60 m² | Area: 5,000 x 12,000 mm | €4,785.00 net, plus transport costs and VAT 90 m² | Area: 5,000 x 18,000 mm | €6,855.00 net, plus transport costs and VAT 120 m² | Area: 5,000 x 24,000 mm | €8,955.00 net, plus transport costs and VAT 60 m² | Area: 10,000 x 6,000 mm | €4,785.00 net, plus transport costs and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,645.00 net, plus transport costs and VAT 180 m² | Area: 10,000 x 18,000 mm | €12,495.00 net, plus transport costs and VAT 240 m² | Area: 10,000 x 24,000 mm | €16,335.00 net, plus transport costs and VAT Further variants available. Please contact us for details. Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal supports instead of cross bracing available at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL DESIGN & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your mezzanine floor exactly according to your operational requirements—tailored to area, load capacity, installation height and intended application. Our planning department will prepare a customised, non-binding offer based on your specifications. Whether new construction, extension or modernisation of existing systems—we support you with sound expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and installation of the goods. This item is available for collection. Delivery or shipping can be arranged for an additional charge. The additional costs depend on the place of delivery and the scope of delivery and can be requested individually from us. Iasdpsxpizajfx Alrou TERMS OF PAYMENT Payment terms must be agreed upon in the case of an order. The price is listed as a unit price/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, specialises in new and used products in the fields of warehouse logistics, conveyor technology, mezzanines, textile storage as well as machines for trade, industry, and crafts. We constantly offer interesting used products from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. ✅ Four Success Factors – The DLK formula for success – Warehouse Technology | Levelmaker® | Logistics | Solutions

Būklė: naujas, TECHNICAL DATA: - Base area: 15,000 x 20,000 mm [other configurations available] Iaedpsxpic Rsfx Alrou - Grid size: 5,000 x 5,000 mm - Top edge floor covering: 3,340 mm - Clear height: 3,000 mm [customisable] - Floor covering: 38 mm particle board, P6 raw/white - Load capacity: 350 kg - Colour: RAL choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights available upon request. Our team will be happy to advise you! Delivery scope: - Columns - Main and secondary beams - Cross braces - Flooring - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus shipping costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus shipping costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus shipping costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus shipping costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus shipping costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus shipping costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus shipping costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus shipping costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus shipping costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus shipping costs and VAT Further configurations available. Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal supports instead of cross braces, subject to surcharge YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. Additional costs depend on the delivery location and scope of the shipment and can be individually requested from us. TERMS OF PAYMENT Terms of payment are to be agreed upon order placement. The price is a unit/net price or as specified in the description text (plus VAT). You will of course receive an invoice stating the VAT amount. ABOUT US The company DLK, based in Nordhorn, deals in new and used products from the fields of warehousing logistics, conveyor technology, warehouse platforms, textile storage as well as machinery for trade, industry, and craft. We continuously offer attractive, pre-owned products from various manufacturers/brands at competitive prices. Please do not hesitate to contact us if you have any questions. Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Būklė: naudotas, Stady a 3 punti Ø 350 mm per tornio SCULFORT Altezza del centro: 550 mm Diametro massimo: Ø 350 mm Distanza tra attacchi a V: 350 mm Larghezza: 1200 mm Iedpfx Aljxxu Sperjau Spessore: 300 mm Altezza totale: 1300 mm Peso: ca. 250 kg

Būklė: naudotas, COMPLETE LINE FOR LOADING, CUTTING, DEBURRING, AND UNLOADING, manufactured by RALC CTS CONNI OPTIONAL: AUTOMATIC ROBOTIC PACKAGING SYSTEM into square/hexagonal bundles, with discharge cart and safety zones Model RALC LYBRA 450 + RALC SDB 100 – 5000 - Cutting range: 40-140 mm - Bundle loader: 6,000 mm - 12,300 mm x 5 t - Unloading: Up to 5,000 mm - Optional: Automatic robotic packaging system BUNDLE SPECIFICATIONS: Loader weight capacity: 5,000 kg Max diameter: 600 mm Minimum – maximum tube length at infeed: 6,000 – 12,300 mm Maximum tube curvature at infeed: 1.5 mm/m CUTTING Possible diameters with loader: - Round: 40 – 140 mm - Square: 40x40 – 135x135 mm - Rectangular: 50x25 – 200x80 mm Maximum tube weight: 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350-400-450 mm Disc clamping according to DIN 8576: 50/4/14/80 mm, 40/4/12/64 mm Maximum tube length at outfeed: 5,000 mm DEBURRING Deburring unit Dimensions: - Round diameter: 20 – 102 mm - Square: 30x30 – 70x70 mm - Rectangular: 40x20 – 80x50 mm Length: 500 – 5,000 mm Material: Stainless steel 37 to DIN17100 Maximum tube curvature for deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power supply: 3x400/50 V/Hz MITRE CUTTING Manual loading also enables MITRE CUTS. Cutting capacity (without loader) Iedpfx Alevt Tzcjreau Round Tube: - At 90º: 100 – 125 – 145 mm - At 45º: 90 – 115 – 135 mm - At 30º: 80 – 95 – 110 mm Square: - At 90º: 90 – 110 – 130 mm - At 45º: 80 – 100 – 110 mm - At 30º: 70 – 80 – 90 mm Rectangular: - At 90º: 140x70 – 160x90 – 180x110 mm - At 45º: 110x60 – 130x70 – 150x70 mm - At 30º: 80x40 – 100x50 – 110x60 mm SCOPE OF SUPPLY 1. Loader Mod. CM5FT12 for bundles up to 5,000 kg, 5,000 to 12,300 mm in length 2. Cutting unit Mod. LYBRA C450 with: - Microlubrication - Air blow-off - Chip conveyor - Tilting carriage - Discharge gripper 3. Deburring unit Mod. SDB100 5000 4. Outfeed cradle with endless slings 5. Complete electricals and hydraulics. 6. Existing documentation * 7. Existing spare parts * *To be verified prior to ordering. OPTION: Automatic front collection gantry with robotic system, capable of packing round, square or rectangular tubes into hexagonal or square bundles. Cutting range: 40 - 140 mm Bundle loader: 6,000 mm - 12,300 mm x 5 t Unloading: Up to 5,000 mm Optional: Automatic robotic packaging system Loader package weight: 5,000 Kg Maximum package diameter: 600 mm Tube length at infeed: 6,000 – 12,300 mm Tube curvature at infeed: max. 1.5 mm/m CUTTING Possible diameters with loader, round: 40 - 140 mm CUTTING Possible dimensions with loader, square: 40x40 – 135x135 mm CUTTING Possible dimensions with loader, rectangular: 50x25 – 200x80 mm Tube weight: max 200 kg Feeding speed: 10-60 m/min Cutting disc diameter: 350 - 400 - 450 mm Tube length at outfeed: max. 5,000 mm DEBURRING Diameter, round: 20 – 102 mm DEBURRING Square dimensions: 30x30 – 70x70 mm DEBURRING Rectangular dimensions: 40x20 – 80x50 mm Length: 500 – 5,000 mm Material: Steel 37 to DIN17100 Maximum tube curvature at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 23022001, pjūklo disko nuolydžio reguliavimas: 45 °, ruošinio plotis (maks.): 80 mm, ruošinio aukštis (maks.): 70 mm, pagrindinis pjūklo diskas skersmuo: 350 mm, gamybos pajėgumas: 1 900 vienetas/val, Tai yra automatinė dvigubo kampo pjovimo staklė! TECHNINĖ INFORMACIJA Procesų stotys: iki 6 Pjovimo kampas: 45° Tinkamos medžiagos: medis, MDF, juostelės, profiliai ir aliuminis pagal pjūklo diską Pjovimo/produkcijos našumas Produkcijos našumas: nuo 1.500 iki 1.900 pjūvių/val. Pjovimo tipas: vienu metu dvigubas kampinis pjūvis Ruoinio matmenys Maksimalus ruoinio plotis: 80 mm Maksimalus ruoinio aukštis: 70 mm Pjovimo mazgas Pjūklo diskai: 2 x 350 mm skersmens Pjovimo padėtys: 2 Pjūklo padėtis: 45° Padavimas / medžiagos tiekimas Maks. padavimo eiga: 1.200 mm Papildoma maks. padavimo eiga: 1.600 mm Maks. padavimo ilgis: 3.200–6.200 mm Vertikalus padavimo ilgis: 3.000, 4.000, 5.000 arba 6.000 mm STAKLIŲ DUOMENYS Iaodpfx Alozdktterou Variklio galia: 2 x 1,5 kW Sistema: pramoninė pneumatinė sistema Prispaudimo sistema: vertikalus ir horizontalus pneumatinis prispaudimas Programinės įrangos versija: 6.0.7.0 Valdymas: jutiklinis ekranas, pelė arba išorinė klaviatūra Programavimo būdai: rėmo ir sąrašo metodai Gamybos duomenys: gamybos ataskaitos Dulkių ištraukimo antgaliai: 2 x 80 mm skersmens Ištraukimo sistema: paruošta dulkių ir drožlių ištraukai Valdymas: PLC / valdymo moduliai Valdymo spinta: pramoninė spinta su relėmis, transformatoriumi, automatiniais jungikliais ir kabelių kanalais Aušinimas: priverstinis vėdinimas Įrenginio išmatavimai / montavimo matmenys / svoris Išdėstymo 1 ilgis: 6.282 mm Išdėstymo 1 plotis: 1.100 mm Išdėstymo 2 ilgis: 8.250 mm Išdėstymo 2 plotis: 4.000 mm Išdėstymo 3 ilgis: 13.952 mm Išdėstymo 3 plotis: 9.000 mm Daliniai išdėstymo 2 matmenys: 2.560 mm, 2.490 mm, 3.200 mm Staklių svoris: 550 kg KOMPLEKTACIJA Automatinis dvigubo kampo pjovimas Vertikalus arba horizontalus medžiagos padavimas Pagrindinė medžiagos griebimo sistema Papildoma „Advanced“ griebtuvo sistema Greitaeigis padavimo servosistema Vertikali ir horizontali prispaudimo įranga Iškrovimo juosta su išstūmėju Kick-out konvejeris Pneumatinis pervežimo konvejeris Jutiklinio ekrano valdymas Programinė įranga su slaptažodžiu Visų komandų rankinis valdymas Programavimas rėmo arba sąrašo metodu Pjovimo programų vizualizacija ir simuliacija Pjovimo ir medžiagų optimizavimas Gamybos duomenų kaupimas Valdymo pultas su ekranu ir indikatoriais PLC / valdymo moduliai Pramoniniai relės Mean-Well maitinimo šaltinis Transformatorius Automatiniai jungikliai Instaliacija kabelių kanaluose Priverstinis vėdinimas Pramoniniai pneumatiniai pavaros Patikrintos jungtys ir žarnos Avarinis stabdis Apsauginė įranga Paruošta dulkių ir drožlių ištraukimui

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Shaft Multi-blade Saw WALTER WD 250/350 30 and 37 kW - Made in Poland - Year of manufacture: 2012 - Technical documentation (DTR) and CE certificate TECHNICAL SPECIFICATIONS: Cutting height: 170 mm Cutting width: 350 mm Spindle diameter: 2 x 70 mm Saw blade diameter: 300 mm Spindle motor: 30 kW and 37 kW Feed motor: 1.5 kW Seven lower feed rollers Two upper toothed feed rollers Infeed table length: 3000 mm Connector diameter for waste extraction under machine: 2 x 200 mm (belt conveyor) Dimensions (L/W/H): 320 / 200 / 200 cm Iaodpfxjmv Elps Alrou Weight: 2000 kg

Būklė: labai geros būklės (naudotas), Katalogo numeris 7807 TECHNINIAI DUOMENYS - vikšro plotis: 350 mm - pjovimo plotis: 350 mm - disko skersmuo: nuo 355 iki 505 mm - pjovimo aukštis: 10-170 mm Iedpfxezccifj Alreau - veleno skersmuo: 80 mm - stalo matmenys: 1900x790 mm - aukštis nuo pagrindo iki stalo: 830 mm IŠ VIRŠAUS - 2 eilių fiksatoriai/atmušėjai - 2 slydimo volai, lygūs, metaliniai - velenas su pjūklais - 2 spaudimo slydimo volai IŠ APAČIOS - kreipiamoji juosta - fiksatoriai/atmušėjai - vikšras - elektrinis korpuso aukščio reguliavimas - centralizuotas tepimas - reguliuojamas dažnio keitikliu greitis - padavimo variklis 4 kW - pagrindinis variklis 75 kW - ištraukimo antgalio skersmuo: 2x150 mm - bendri matmenys ilgis/plotis/aukštis: 2050x1800x1800 mm - svoris apie 3500 kg PRIVALUMAI – vokiška gamyba – DTR dokumentacija – naudota daugiapjūklė – labai gera būklė Neto kaina: 58 900 PLN Neto kaina: 14 000 EUR pagal 4,2 EUR kursą (Kainos gali keistis, jei kursų svyravimai yra didesni)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Arburg 570C 2000-350/150 / Production line with lateral Arburg Multilift robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Iasdpfezc N Twjx Alrou Dosage volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar distance: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with lateral Arburg Multilift robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner interface Reinforced injection units – bimetallic Proportional valves on injection units – for precise dosing Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are started up by our service technicians before delivery. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 Injection Unit: Screw diameter: 35 mm Shot weight: 117 g Injection pressure: 2500 bar Dosage volume: 139 cc Clamping Unit: Clamping force: 130 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Iaodpfszc N Ihjx Alrsu Controller with hot runner zones x 6 Hardened injection unit – bimetallic Proportional valve on the injection unit – precise injection Integrated system for quality pressure control from Sensor Kistler – tool pressure measurement Injection unit type: Vario – enables use of the unit e.g. for side injection A new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/Width/Height: 4.45 x 1.49 x 2.17 m Drive: Pump/motor: 22 kW Heating capacity: 10.2 kW Total power: 32.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 420C 1000-350/150 / Gamybos linija su šoniniu Arburg Multilift H robotu / 2K mašina Pagaminimo metai: 2009 m. spalio mėn. Įpurškimo agregatas: Sraigto skersmuo: 45 mm Įpurškimo svoris: 210 g Įpurškimo slėgis: 1670 bar Dozavimo tūris: 230 ccm Uždarymo agregatas: Uždarymo jėga: 100 t Kolonų atstumas: 420x420 mm Plokščių dydis: 570x570 mm Išstūmiklis: hidraulinis Uždarymo agregatas: hidraulinis Valdymas: SELOGICA Papildoma įranga: Gamybos linija su šoniniu Arburg Multilift H robotu 2K mašina su pasukamu stalu Valdymas su oro vožtuvu Hidraulinis šerdies ištraukimas x 2 Valdymas su karštųjų kanalų sistema Sustiprinti įpurškimo agregatai – bimetalas Proporciniai vožtuvai įpurškimo agregatuose – itin tikslus įpurškimas Vertikalus įpurškimo agregatas – sraigto skersmuo: ⌀30 mm – 71 g/PS Pasukamas stalas už papildomą kainą Šoninis Arburg Multilift H robotas Pagaminimo metai: 2009 5 ašių robotas: Z ašis varoma servovarikliu (elektrinė), X-, Y-, B- ir C-ašys pneumatiniu būdu Roboto saugos paketas Robotas su adapteriu, konvejeriu, apsauginiu gaubtu Roboto ir konvejerio įsigijimas už papildomą kainą Matmenys: Ijdszc N Etjpfx Alroau Svoris: 5210 kg Visos siūlomos mašinos prieš pardavimą paleidžiamos mūsų technikų. Galima gauti pasirinktos įrangos techninių bandymų vaizdo įrašą arba dalyvauti techniniuose tiesioginiuose bandymuose mūsų įmonėje Lodzėje. Kaina: pagal užklausą

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Arburg 420C 1000-350 Year of manufacture: 1995 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 100 t Iasdpfxezc N Eas Alrsu Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Euromap Robot interface Hydraulic core pull X 1 Dimensions: Weight: 3700 kg Length/Width/Height: 4.35x1.64x2.08 m Drive: Pump/Motor: 22 kW Heating capacity: 8.6 kW Total power: 30.6 kW All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in technical live tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Iaodpfxszc Nwcs Alrsu Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Injection volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar spacing: 720 x 720 mm Platen size: 1040 x 1060 mm Ejector: hydraulic Clamping system: toggle Control: NC5 Additional Equipment: Euromap 67 interface Robot interface 5 x air valves 1 x hydraulic core pull controlled by proportional valve 5 x hot runner controllers Injection unit hardened - bimetallic Moog proportional valve on injection unit – precise injection Parallel movements Central lubrication 3 variable displacement hydraulic pumps Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR833 Robot Year of manufacture: 2011 4-axis robot: 3 axes with servo motors (electric), Y-axis telescopic; C axis pneumatic, A axis movement Travel range (axes): X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Robot and conveyor belt available at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26 x 2.01 x 2.27 m All offered machines are started and tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 ccm Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control: NC5 Isdpozc Nv Sefx Alreau Additional equipment: Euromap 67 Robot interface Control with air valve Hot runner control x 5 Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable capacity Built-in printer Machine regularly serviced by authorized Sumitomo Demag service Robot Wittmann-Demag DR853 Year of manufacture: 2016 6-axis robot: 5 axes are driven by servo motors (electric): X, Y-telescopic, Z, B, C Axis travel distances: X-1200, Y-2400, Z-4000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: on request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Wittmann Battenfeld EcoPower 110/350 / Electric Injection Moulding Machine / Operating hours: approx. 15,000 in automatic mode Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2,083 bar Iajdpfx Aljzc Nuzjrju Dosage volume: 168 cc Clamping unit: Clamping force: 110 t Tie bar distance: 470x420 mm Platen size: 682x682 mm Ejector: electric Clamping system: toggle lever Control system: UNILOG B8 - touchscreen Additional equipment: Machine in very good technical condition All-electric machine: energy-saving and exceptionally quiet Operating hours: approx. 15,000 in automatic mode Total operating hours: 21,800 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Heater control with hot runner capability Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/width/height: 4.91x1.42x2.10 m All machines offered are tested by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in a live technical test at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Wittmann Battenfeld EcoPower 110/350 with Wittmann W818 Robot / All-Electric Injection Moulding Machine / Operating Hours: approx. 16,000 in automatic mode Year of Manufacture: 2017 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Metering volume: 169 ccm Clamping Unit: Clamping force: 110 t Tie bar spacing: 470x420 mm Platen size: 680x660 mm Ejector: electric Clamping mechanism: toggle lever Control: UNILOG B8 – Touchscreen Additional Equipment: - Excellent technical condition - All-electric machine: high-speed, energy-efficient, and very quiet - Operating hours: approx. 16,000 in automatic mode - Euromap 67 - Robot interface - Control with pneumatic valve - Hydraulic core pull x 1 - Hot runner control - Injection unit is wear-resistant and corrosion-proof - Central lubrication - Automatic mold height adjustment - Parallel movements - The machine has been serviced in Germany Wittmann W818 Robot Year of Manufacture: 2015 4-axis robot: 3 axes are electrically driven by servo motors; C-axis – pneumatic Travel distances by axis: X-420, Y-1200, Z-2000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Iedpfx Alszc Nuusreau Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91x1.42x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Ferromatik Milacron K-TEC 350-2650 / Gamybos linija su Sepro robotu Pagaminimo metai: 2017 Liejamasis mazgas: Sraigto skersmuo: 70 mm Įpurškimo svoris: 1104 g Įpurškimo slėgis: 2175 bar Dozavimo tūris: 1213 ccm Spaudimo mazgas: Spaudimo jėga: 350 t Kolonų atstumas: 750x750 mm Plokščių matmenys: 1110x1165 mm Išstūmiklis: hidraulinis Spaudimo mazgas: hidraulinis Valdymas: MOSAIC – lietimui jautrus ekranas Papildoma įranga: Labai gera techninė būklė Greitaeigė mašina Darbo valandų skaičius: apie 10 000 h automatiniame režime Euromap 67 Roboto sąsaja Oro vožtuvas x 5 Hidraulinis branduolio ištraukimas x 3 Iasdpfx Alezc Nr Horsu Karštųjų kanalų valdymas Įpurškimo agregatas grūdintas – bimetalinis Proporcinis vožtuvas įpurškimo mazge – tiksli įpurškimo kontrolė Paralelūs judesiai Mašina su cilindru / akumuliatoriumi su suslėgtu azotu (papildomas užtaisas greitam darbui) Energiją taupanti mašina – turi 3 kintamo našumo hidraulines pompas Mašina reguliariai prižiūrėta įgalioto serviso Vokietijoje Matmenys: Svoris: 22000 kg Ilgis / plotis / aukštis: 8,62x2,21x2,80 m Visos siūlomos mašinos prieš parduodant paleidžiamos mūsų technikų. Galima gauti pasirinktos mašinos techninių bandymų vaizdo įrašą arba dalyvauti techniniuose bandymuose tiesiogiai mūsų įmonėje Lodzėje.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Arburg 420S 800-350 Metai: 2003 Liejimo agregatas: Sraigto skersmuo: 50 mm Liejimo svoris: 250 g Liejimo slėgis: apie 1300 bar Dozavimo tūris: 288 ccm Uždarymo agregatas: Uždarymo jėga: 80 t Kolonų atstumas: 420x420 mm Spaudos plokščių matmenys: 570x570 mm Išstūmiklis: hidraulinis Uždarymo agregatas: hidraulinis Valdymas: SELOGICA Papildoma įranga: Euromap 12 Robotų sąsaja Oro vožtuvas x 1 Branduolio traukos valdymas Grūdintas – bimetalinis liejimo agregatas Proporcinis vožtuvas liejimo agregate – tiksli įpurškimo kontrolė Integruotas šoninis Arburg originalus angų nuėmėjas Išmatavimai: Svoris: 3800 kg Ilgis/plotis/aukštis: 4,06x1,39x2,12 m Pavaros sistema: Siurblys/variklis: 18,5 kW Šildymo galia: 10,2 kW Iasdpfx Alszc Nrasreu Bendra galia: 28,7 kW Visi siūlomi įrenginiai prieš pardavimą yra paleidžiami mūsų technikų. Galite gauti pasirinktų įrenginių techninių bandymų vaizdo įrašą arba dalyvauti techniniuose gyvuose bandymuose mūsų įmonėje Lodzėje. Kaina: pagal užklausą

Būklė: naudotas, Używana pozioma mieszalnica wstęgowa ze stali nierdzewnej producenta WAM GROUP S.p.A. (Włochy), model WNHO2400E/0DK. Całkowita pojemność mieszalnika wynosi 2400 litrów. Pojemność robocza to około 1500–1700 litrów. Komora mieszająca ze stali nierdzewnej posiada wymiary wewnętrzne: szerokość 1210 mm x długość 2000 mm i jest wyposażona w drzwi inspekcyjne zlokalizowane na ścianie bocznej o wymiarach 1200 mm szerokości x 450 mm wysokości. Mieszalnik wyposażony jest w przerwaną podwójną spiralę o przeciwnym skoku, wykonaną ze stali magnetycznej nierdzewnej (stal ferrytyczna). Mieszadło napędzane jest przez przekładnię i pasy z silnikiem elektrycznym o mocy 18,5 kW, 1470 obr./min, 50 Hz. Prędkość obrotowa wału roboczego wynosi około 29 obr./min. Urządzenie posiada centralny dolny wylot o wymiarach: szerokość 175 mm x długość 250 mm, wyposażony w zawór sterowany pneumatycznie. Pokrywa górna mieszalnika wykonana jest ze stali nierdzewnej i wyposażona w centralne przyłącze o średnicy 390 mm. Specyfikacja: Pojemność: 2 400 l Materiał wykonania: stal nierdzewna i stal magnetyczna nierdzewna (stal ferrytyczna) Szerokość: 1 210 mm Moc silnika: 18,5 kW Długość: 2 000 mm Płaszcz grzewczy/chłodzący: nie Typ wylotu: dolny, zawór sterowany pneumatycznie Typ ślimaka wstęgowego: przerwana podwójna wstęga o przeciwnym skoku Obroty na minutę: 29 Iasdpfxezbucns Alrju

Būklė: naudotas, Gamybos metai: 2016, įėjimo įtampa: 400 V, įėjimo srovė: 32 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, tūrio srautas: 6 927 m³/val, siurbimo galia: 9 500 m³/val, įsiurbiamojo kolektoriaus skersmuo: 350 mm, filtravimo plotas: 42 m², triukšmo lygis: 74 dB, bendras aukštis: 2 420 mm, bendras ilgis: 5 000 mm, bendras plotis: 1 250 mm, bendras svoris: 1 500 kg, Dulkių nutraukėjas, drožlių ištraukėjas, automatiškai išsivalantis vakuuminis filtras NESTRO NE 350 P. Automatinis filtro valymas pneumatinio pavaros pagalba. Ventiliatorius įrengtas švarioje pusėje, todėl sprogimo rizika sumažinta iki minimumo. Įrenginys tinkamas plataus juostos šlifuokliams bei visų rūšių sausoms dulkėms įvairių technologinių procesų metu. Ventiliatoriaus galia 11 kW. Našumas iki 9500 m³/h Nominalus našumas – 6927 m³/h Vakuumas 2400 Pa Jungties diametras 350 mm Filtravimo plotas 42 m² Pagaminimo metai: 2016 Matmenys: ilgis – 5,00 m gylis – 1,25 m aukštis – 2,42 m svoris 1500 kg sandėlio numeris: 1143 Ijdezdddyspfx Alreau