Anayak Hvm 11000 pirkti naudotą (228)

Būklė: labai geros būklės (naudotas), Weiss Temperature Chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume approx. 990 liters Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 5 K/min Cooling: 5 K/min Heat compensation: max. 2750 W Standard equipment installed: R1: NW 125 mm L1: NW 50 mm Nedsp Dun Ajpfx Acpjla Dimensions: Test chamber dimensions: Width 1100 mm × Depth 950 mm × Height 950 mm Unit dimensions: Width 1390 mm × Depth 1525 mm × Height 1995 mm Maximum load capacity (evenly distributed) of test chamber floor: 150 kg Per shelf grate: 50 kg Total load on shelf supports: 100 kg Operating data: Test chamber lighting: Halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 27.0 kW Rated current: 42.02 A Heat emission (water-cooled cabinets): max. heat emission to ambient 1.3 kW Noise measurement: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Model: WT11-1000/70/5 For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors!) We are happy to answer further questions for you by phone.

Būklė: geras (naudotas), Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Control Unit: “Touchpanel” All control and operation commands can be executed simply by touching the function icons on the touch panel. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These feedthroughs allow measurement lines and test devices to be routed into the test chamber space. Njdpfsrvx Ezox Acpola Feedthroughs: 1 feedthrough ∅ 125 mm installed on the right 1 feedthrough ∅ 50 mm installed on the left Volume: 990 liters Test Chamber Interior Dimensions: Test chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Data for temperature testing: Minimum temperature: –70 °C Maximum temperature: +180 °C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K Temperature change rate (heating): 4 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 2750 W Data for climate testing: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% r.h. Operation data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A Rated power: 19.8 kW Refrigerants: R-452A / R23 Weight: approx. 910 kg Important information for your safety as a buyer! The following checks and preparations are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, replenishment with legally compliant refrigerants 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in the listed data!) If you have any further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Weiss Temperature Chamber We are offering a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume: approx. 990 liters Specifications for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation at the center of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 4 K/min Cooling: 3 K/min Heat compensation: max. 4500 W Port openings, included in basic configuration: Nljdpfxsp Dun Ue Acpsa R1: nominal width 125 mm L1: nominal width 50 mm Dimensions: Test chamber interior dimensions: width 1100 mm x depth 950 mm x height 950 mm Overall unit dimensions: width 1390 mm x depth 1525 mm x height 1995 mm Maximum load capacity (evenly distributed) for the test chamber floor: 150 kg Per shelf: 50 kg Total shelf load: 100 kg Technical data for operation: Test chamber lighting: halogen bulb, 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 11.5 kW Rated current: 22 A Heat output for water-cooled cabinets: max. heat output to ambient 1.3 kW Noise level: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Model: WT11-1000/40 Important information for your safety as a buyer! The following points are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and error!) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Weiss Type: WK11-1000/40 For sale is a professional climate test chamber Weiss Umwelttechnik WT-WK 1000/40 with fully automatic cold-regenerating adsorption dryer. The existing fittings in the test chamber can be removed if required. Currently, due to these fittings, the control cabinet is limited to a temperature range of −40°C to +60°C. After removing these fittings, the manufacturer can restore the standard temperature range of −40°C to +180°C, as the current fittings are not suitable for higher temperatures. The unit is ideal for precise temperature and humidity testing of components, assemblies, and devices. Perfect for applications in industry, development, quality assurance, and research. Weiss climate test chamber, water-cooled Specifications for temperature tests: Temperature range: -40°C to +60°C Temperature fluctuation (temporal, in center of working space): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature rate of change: Heating: 4 K/min Cooling: 3 K/min Specifications for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98 % RH Temperature fluctuation (temporal, in center of working space): ±0.1 to ±0.3 K Temperature deviation (spatial): ±0.5 to ±1 K Humidity fluctuation (temporal, in center of working space): ±1 to ±3% RH Heat compensation: Within +25°C to +95°C to a relative humidity of up to 90%: 500 W Humidification system data: Nljdpfjx Hxkzjx Acpja Tank volume: 20 l Water quality: demineralized pH value: 6 to 7 Conductivity: 5 to 20 µS/cm³ Water consumption at constant +40°C, 92% RH: 21 l/24 h Temperature gradient (according to IEC 60068-3-5): 1 to 2 K Test chamber inner dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test chamber volume: approx. 990 liters Rated voltage: 3/N / PE AC 400 V +10% 50 Hz Rated power: 11.5 kW, Rated current: 22.0 A Refrigerant: R 404A Weight: 840 kg For your safety as a buyer, please note the following: The following points are routinely carried out on chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented trial run is performed on the chambers. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, specifications) If you have further questions, we are happy to answer them by phone.

Būklė: paruoštas naudoti (naudotas), Siemens 6AV7861-3TB00-1AA0 Simatic Flat Panel 19" Touch Industrial PC, SN: LBW11000010 Serial number as per photo, used, in good condition, fully functional, scope of delivery as shown in the photos. Nlodpfsi Edfrsx Acpsa

Būklė: naujas, APPC1740T-WL-B 17" Panel PC SN:TABI11000223, manufacturer unknown, unused in opened original packaging, 100% functional, scope of delivery as per photos. Nodpjp Ilk Sofx Acpjla

Būklė: paruoštas naudoti (naudotas), Grundfos MG 112 MS 2-28 FT 136-C drejfasemotor, SN 1100029148, brukt, med minimale bruksspor, 100 % funksjonsdyktig, leveres som vist på bildene. Nlodpjqyq Nqsfx Acpea

Būklė: naujas, Rexroth MDD112C-N-030-N2M-130GB1 MNR: R911264264 SN:7162111000378, unused in opened original packaging, 100% functional, scope of delivery as per photos Nsdpfx Aji D Nhlecpsla

Būklė: naudotas, Gamybos metai: 2015,

Būklė: naujas, Gamybos metai: 2025, Formatinė diskinė pjovimo staklės ALTENDORF F 35 Tipas 1 - 1000 Puikiai tinka masyviai medienai - Naujas įrenginys - iš karto prieinamas iš sandėlio Bitburge - Variklio galia 7,5 kW, 400 V, 50 Hz, 3 sukimosi greičiai Variklio valdomas aukščio ir pasvirimo reguliavimas Didelis apsauginis gaubtas Dvigubas riedėjimo stalas 3.200 mm Nodpfsxyl Epox Acpsla Paruošta priešpjūviui Lygiagrečioji liniuotė, pjovimo plotis 1.000 mm Kampinis-falcos liniuotė 3.450 mm, be ilgio kompensacijos Stalviršio prailginimas/ išplatinimas: milteliniu būdu dengtas paviršius Pjūklo disko pasvirimo diapazonas: 0 - 46° Stalo ilgis: 3.200 mm Pjovimo ilgis: 3.100 mm Pjovimo plotis: 1.000 mm Pjovimo aukštis: 154 mm Maks. pjūklo disko Ø: 450 mm Ekrano dydis: 15 colių, Darbo stalo aukštis: 910 mm, Nusiurbimo antgalis Ø: 80 + 120 mm Įskaičiuotos parinktys: M45102 Lygiagrečioji liniuotė 1000 mm Digit_X Vieta: iš sandėlio 54634 Bitburg - iš karto prieinama -

Būklė: naujas, Balance Systems 9SHVM2512BN220 balansavimo plokštė SN: B804342, nenaudota, atidarytoje originalioje pakuotėje, 100% veikianti, komplektacija pagal nuotraukas. Nodpex Eqvgjfx Acpsla

Būklė: naujas, Brinkmann Pumps STS1003 / 390 + 435 siurblys SN: 0111000878-52848001, nenaudotas, atidarytoje originalioje pakuotėje, 100 % veikiantis, komplektacija pagal nuotraukas. DĖMESIO: Pakuotės ir pristatymo kainos prašome teirautis atskirai! Nlsdex Eq A Tepfx Acpoa

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 600 mm, bendras ilgis: 11 200 mm, bendras plotis: 5 100 mm, įvesties srovės tipas: trifazis, garantijos trukmė: 24 mėnesiai, vidinis aukštis: 4 970 mm, vidinis ilgis: 11 000 mm, temperatūra: 80 °C, vidinis plotis: 5 000 mm, oro poreikis: 52 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 250 kW (339,91 AG), galia: 45 kW (61,18 AG), kuras: suskystintos naftos dujos (LPG), įėjimo dažnis: 50 Hz, energijos suvartojimas: 45 kWh, izoliacijos storis: 50 mm, nominali galia: 250 kW (339,91 AG), plieno lakšto storis (maks.): 2 mm, Įranga: apšvietimas, * Air Treatment Unit: The air treatment unit is a recirculation system that supplies the cabin with filtered fresh air and expels used air during the painting process. It heats the air to 60°C, mixes 10% fresh air with recirculated air via an automatic multi-damper system, and reheats the air before it is fed back into the cabin. Air is heated using a burner and heat exchanger, both made from high-grade 304 stainless steel and housed in the fresh air unit. During painting, the air passes through two stages of filtration (front and ceiling filters) before entering the cabin. The contaminated air is also filtered twice (inlet and outlet filters) before leaving through the extraction unit. Air treatment units are insulated like the side walls to minimize heat loss and are equipped with rubber seals on the covers to protect against possible vibrations and noise. The exhaust air is regulated by a damper in the exhaust air duct, which helps control the cabin’s internal pressure. * PRINCIPLE OF OPERATION FOR THE CABIN: Processes inside the cabin are controlled via an operator panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passes through front filters before entering the distribution chamber at ambient temperature. The air is then extracted through the exhaust unit. Floor filters (paint stop) capture paint particles, and the air passes through final exhaust filters before being released. * FLASH-OFF PROCESS: After painting, the cabin continues to operate for about 15 minutes to expel residual solvents and thinners. During this process, fresh air from outside circulates in the cabin. Nsdpowzl Hxjfx Acpola * DRYING PROCESS: In this phase, 80% of the air circulating through the cabin is heated to 60°C and supplied to the cabin via the distributor. Since 20% of the solvents are released during drying, they are expelled along with this air. Industrial paints are generally dried at 60°C, though the cabin temperature can be adjusted via the operator panel as needed. * COOLING PROCESS: After the 30-minute drying phase, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices integrated into the cabin. The panel is constructed from robust galvanized sheet metal and steel profiles, and is fully enclosed for protection from dust and moisture. Electrical Components and Switching Panels: • The switching panel includes all necessary components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for control and command connections between the control panel and motors or other electrical devices. • Wiring is designed to allow for cabin relocation, if required. • Operating equipment is powered at 380 V 50 Hz, while control devices run at 220 V.

Būklė: naujas, Balance Systems Digital Interface Balancer 9SHVM2512B N220 kortelė SNr. B803704, nenaudota, 100% veikianti, pristatymas pagal nuotraukas Nedpfji D T Dgex Acpjla

Būklė: naujas, Siemens 1PH7133-2NF02-0CB0 asinchroninis variklis SN YFW812553110002 + W2D210-EA10-11 ventiliatorius, nenaudotas, atidarytoje originalioje pakuotėje, 100% veikiantis, komplektacija pagal nuotraukas. DĖMESIO: dėl pakavimo ir transportavimo išlaidų prašome teirautis atskirai! Nodpfxsx Dvzve Acpola

Būklė: paruoštas naudoti (naudotas), Siemens 1HU3104-0AH01-Z nuolatinio magneto variklis Z= žr. tipinę lentelę SN: E8G863902110001, profesionaliai pilnai atnaujintas ir patikrintas, suteikiama 24 mėn. garantija, 100 % veikiantis, komplektacija pagal nuotraukas. Šiai prekei sutartos nuolaidos netaikomos. Kainos teiraukitės atskirai! DĖMESIO: Pakuotės ir siuntimo kainą prašome teirautis atskirai! Nodpjx Dvnpefx Acpsla

Būklė: naujas, Balance Systems digitale Schnittstellen-Auswuchtelektronik 9SHVM2511TD120 Karte, Seriennummer 803703, unbenutzt, 100% funktionsfähig, Lieferumfang gemäß Abbildungen. Nledji D T A Uepfx Acpja

Būklė: naujas, Balance Systems 9SHVM2511TD120 card, serial no. 803704, unused, 100% functional, scope of delivery as per photos Nodpfx Acji D T Dcepsla

Būklė: naujas, Balance Systems SRL 9SHVM2511TD120, new and unused in opened original packaging, 100% functional, scope of delivery as per photos Njdpei D T Dkofx Acpola

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, The conveyor belt is for sale and has the following dimensions: Length: 1300 mm Belt width: 290 mm Overall width: 394 mm Conveyor belt in blue, RAL 5002, temperature resistant up to 100° C Nsdpfxewtflfo Acpsla Guide plate: 60 mm high Motor protection switch next to the motor With adjustable support frame, height adjustable in 30 mm increments, max. 900 mm

Būklė: paruoštas naudoti (naudotas), - Drilling diameter: 5–25 mm Nlsdpfx Acjdgpltepea - Drilling depth: 1000 mm - Tailstock - Tank - Pump - Filter

Gamybos metai: 2023, būklė: naudotas, VIOLI VM/TRI25-3s Drawing Bench Year of manufacture: 2023 The VIOLI VM/TRI25-3s drawing bench is a robust and innovative machine designed for precise and efficient metal drawing operations. Featuring a useful length of 3 meters and a powerful traction capacity of 2,500 kg, its patented hydraulic system ensures linear pulling, a compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful length: 3 meters Traction force: 2,500 kg Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min – Max. 17 m/min Drawing reduction: Approximately 15% of section POINTER clamping force: 100 tons Tolerance: 1 mm Power supply: 400 V – 50 Hz Njdpfx Asyl U Sqocpsla Electric power: 9.2 kW Hydraulic oil: ISO 46 Motor power: 9.2 kW – 380 V, 50 Hz Noise: At work station LP < 70 dB(A) Hydraulic system: Proportional hydraulic pump Carriage movement: With ball circulation guides Mobile construction and installation of a carrier for accommodating 1 or more pull rods in line with the carriage Provision for cooling the lubricant oil with the insertion of a stainless steel tube coil in the tank Adjustable die holder Bar support system Lubrication tank with pump Manual opening/closing of the clamp, actuated by pneumatic piston Compliance: The machine is built in accordance with EU conformity regulations. DETAILED FEATURES Operating system: The system uses a hydraulic piston and patented technology to optimize space, guaranteeing lineal stroke. With the drawing hole, it minimizes flexing of the support structure. It allows for a compact die length and a double usable pulling stroke. Clamp return: A patented double-circuit chain technology returns the clamp to its starting point. This allows... The hydraulic piston length to be half of the useful stroke. Traction force: The traction force is in line with the drawing die. Speed control: Manually adjustable speed from 0 to 16 meters per minute (0–16 m/min). Offers precise speed regulation and constant speed due to hydraulics. Tolerance: Tolerance is 1 mm. Hydraulic system: Equipped with a proportional hydraulic pump. Motor power: 9.2 kW – 380 V, 50 Hz. Carriage: Sliding carriage with ball circulation guides. Die holder: Mobile construction and installation for accommodating 10 dies in line with the carriage. Lubrication: Features a lubrication tank with pump and integrated cooling system. Lubricant oil cooled by a stainless steel tube coil inside the tank. Adjustable die holder. Bar support: Comes with a bar support system. Clamp operation: Manual opening and closing of the clamps via pneumatic piston. Control panel: The machine is fitted with a control panel. FUNCTION The VM/TRI253S hydraulic drawing bench is a machine used for cold reduction of the cross-section of metal rods, either with round or shaped profile, as well as hollow or “live” metal tubes. The section reduction is achieved by passing the product through a calibrated drawing die and pulling it using a mechanical clamp with the required force to achieve the section reduction. C...

Būklė: labai geros būklės (naudotas), KATALOGO NUMERIS 7026 TECHNINĖS SPECIFIKACIJOS - įleidimo plotis: 740 mm - įleidimo aukštis: 300 mm - veleno plotis: 780 mm - veleno skersmuo: 1000 mm - peilio ilgis: 780 mm - peilių skaičius: 2 vnt - sietos matmenys: 55x55 mm - apačioje: 4 dantyti traukimo velenai - apatinio veleno variklis: 5,5 kW - viršuje: 3 dantyti traukimo velenai Nljdjyk Hfaopfx Acpja - viršutinio veleno variklis: 5,5 kW - tiekiamas konvejerinis juostas - tiekiamos juostos ilgis: 4300 mm - tiekiamos juostos plotis: 600 mm - juostos pavara variklis: 2,2 kW - pagrindinis variklis: 90 kW - atbulinė eiga - automatinis atbulinis režimas (autoreversas) - bendri įrenginio matmenys (ilgis/plotis/aukštis): 4600x2350x1700 mm - bendri padavimo įrenginio matmenys (ilgis/plotis/aukštis): 4550x980x970 mm - bendras svoris: apie 11000 kg – vokiška gamyba, - automatinis atbulinis režimas (su reguliavimu) – naudotas smulkintuvas, labai gera būklė Grynoji kaina: 265900 PLN Grynoji kaina: 63300 EUR Grynoji kaina apskaičiuota pagal kursą 4,2 PLN/EUR (kursui reikšmingai svyruojant, kaina gali keistis)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 3 280 mm, bendras aukštis: 2 700 mm, bendras plotis: 2 000 mm, bendras svoris: 11 000 kg, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the ram stroke cycle, the sheet can be bent and adapted to the desired geometric cross-section. The machine is suitable for use in many industries – such as the electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Features - Back gauge position control - Intelligent position control - Recall functions Nlodpfsyttbmox Acpsa - Automatic reference point search - Parameter backup and restoration with identification - Fast position indexing - Memory for 40 machining programs, each with 25 steps - Power failure protection Technical Specifications - Pressing force: 200 T - Maximum workpiece length: 3200 mm - Distance between uprights: 2530 mm - Throat depth: 320 mm - Ram stroke: 200 mm - Maximum opening height: 455 mm - Motor power: 11 kW - Weight: 11,000 kg - Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment - MTP-3212 control unit - Ball-guided back gauge - Two back gauge fingers - Two front supports - Cylinder covers - Optical safety light curtains (front) - Safety guard (rear) - Foot pedal - AMADA-type punch holder - Four-sided lower tool die - Electrically driven back gauge - Segmented punch with possibility to replace a damaged segment Delivery Terms - The machine is brand new - 12-month warranty - Warranty service - Post-warranty service - CE Declaration of Conformity - Operating manual in English Delivery to the customer is possible. Shipping costs are calculated individually by the transport company. If you are interested in other machines, please visit our website.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, spaudimo jėga: 6 500 kN, Klemmkraft: 650 t Schneckendurchmesser: 80 mm Schussgewicht: 1.170 g Stäbenabstand (vertikal): 960 mm Stäbenabstand (horizontal): 1.110 mm Schussvolumen: 1.284 cm³ Bauart: Horizontal Antrieb: Hydraulisch Spritzgießmaschine – KM 650 GX Spritzeinheit: SP 3000 Schneckendurchmesser: 80 mm Schließeinheit Klemmkraft: 6.500 kN Werkzeughaltekraft: 455 kN Plattengröße (H × V): 1.540 × 1.440 mm Stäbenabstand (H × V): 1.110 × 960 mm max. Werkzeughöhe: 1.450 mm Werkzeugeinbauhöhe (min./max.): 450 / 1.000 mm Öffnungshub: 1.000 mm Auswerferhub: 250 mm Auswerferkraft (vor/zurück): 95 / 49 kN Spritzeinheit Schneckendurchmesser: 80 mm L/D-Verhältnis: 21,3 Einspritzdruck: 1.538 bar Schussvolumen: 1.284 cm³ Schussgewicht (PS): 1.170 g Einspritzrate: 141 cm³/s Einspritzgeschwindigkeit: 133 mm/s Einspritzleistung: 60 kW Plastifizierleistung (PS): 139 g/s Heizleistung installiert: 36 kW Düsenrückzugskraft: 7 kN Antrieb und Energie Installierte Pumpenleistung: 90 kW Trockenlaufzeit (EUROMAP 6): 3,0777 s Trockenlaufzeit (KM Norm): 2,5555 s Maschinenabmessungen und Gewicht Abmessungen (L × B × H): 8,03 × 2,88 × 2,45 m Nettogewicht: 12.000 kg Max. Werkzeuggewicht: 11.000 kg Öltankkapazität: 1.180 l Nljdpfxoy Eyxdo Acpoa