Vertikal Mit Integ. Waage A pirkti naudotą (85 985)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) Fpodoh R Taqjpfx Actji - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing Fsdpjmhhy Nefx Actjpi - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, X ašis: 505 mm, Y ašis: 405 mm, Z ašis: 405 mm, M8 srieginių angų skaičius: 9, didžiausias ruošinio aukštis: 545 mm, didžiausia stalo apkrova: 180 kg, tikslumas: ISO 10360-2, raiška: 0,1 µm, kreiptuvų sistema: oro guoliai visose ašyse, perstatymo greitis CNC režimu: 8-300 mm/s (maks. 520 mm/s), valdymo svirties (joystick) greitas režimas: maks. 80 mm/s, lėtas: 0,05 mm/s, matavimo greitis: 1-8 mm/s (CNC), pagreitis: 0,13 g (maks. 0,23 g), matavimo stalo medžiaga: granitas, stalo matmenys: 638x860 mm, suspausto oro sąnaudos: apie 50 l/min esant 0,4 MPa, ilgis: 1122 mm, plotis: 1082 mm, aukštis: 2185 mm, svoris (įskaitant stalą ir valdymo įrangą): 515 kg. Vietoje apžiūra galima. Fpjdpfx Acey Duq Eetei

Būklė: labai geros būklės (naudotas), ašių konfigūracija: 3 ašys, pirmoji registracija: 06/2016, bendras ilgis: 13 900 mm, bendras plotis: 2 550 mm, pakaba: oras, padangos dydis: 385/65/22.5, ratų bazė: 9 970 mm, spalva: mėlyna, Gamybos metai: 2016, Įranga: ABS,

Būklė: nepatikrintas (naudotas), Volume: Approx. 6000 L Type: Vertical, standing on three legs Tank diameter: 2250 mm Heatable/coolable double jacket Enamelled tank Fpsdpfjhg Nk Dex Actsi

Būklė: nepatikrintas (naudotas), Volume: Approx. 6000 L Type: Vertical, standing on three legs Tank diameter: 2250 mm Heatable/coolable double jacket Fodpshg Niqsfx Actjpi Enamelled tank

Būklė: nepatikrintas (naudotas), Volume: Approx. 5000 L Type: Vertical, standing on three legs Fpodpfx Acjhg Nlpetji Tank diameter: 2100 mm Heatable/coolable double jacket

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, valdiklio modelis: DNC 80, automatizacijos lygis: vadovas, Jonescheit Hytap 30 su DNC 80 – patikima lankstymo staklės su patikrinta valdymo sistema Parduodama Jonescheit Hytap 30 su DNC 80 valdymu. Tai patikimos ir patikrintos lankstymo staklės, skirtos naudojimui dirbtuvėse ir gamyboje. Staklės puikiai tinka tiksliems lenkimo darbams ir pasižymi tvirta konstrukcija bei paprastu valdymu per DNC-80 valdymo pultą. Tai įdomus sprendimas įmonėms, ieškančioms veikiančių ir iš karto naudojimui paruoštų lankstymo staklių. Žinomi duomenys: Gamintojas / modelis: Jonescheit Hytap 30 Valdymas: DNC 80 Pagaminimo metai: 1995 Versija: rankinė Būklė: naudota, visiškai veikianti Pastabos: Staklės parduodamos be įrankių. Galima apžiūra ir bandomasis paleidimas vietoje. Būklė: Naudota ir paruošta darbui. Išvada: Fpedpfx Ajyxakyjctoi Patikimos lankstymo staklės vartotojams, ieškantiems patikrintos įrangos su DNC valdymu. Puikiai tinka apžiūrai ir veikimo patikrinimui vietoje.

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25MythoSarya05, Exhibition unit Mytho S Fpodoykuh Njpfx Actei with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: N2104796, GEM F470 AUTOMATIC CARTON SEALER WITH AUTOMATIC FLAP CLOSING FOR CONSISTENT CARTON SIZES incl. centering unit and Siemens S7 PLC control CARTON DIMENSIONS: - Length: min. 150 mm – max. 600 mm - Width: min. 100 mm – max. 520 mm - Height: min. 100 mm – max. 670 mm TECHNICAL DATA: - Siemens S7-1200 PLC control - RCC500 infeed centering unit - Vertical drive and guide belts - Carton size adjustment manual - Top and bottom sealing unit - Standard versions T22 / T23 - Tape width from 50 to 50 mm, depending on unit - Adjustable tension - Max. tape reel diameter: 360 mm - Tape reel core: 76 mm - Mains voltage: 400V, 3-phase, N, PE – 50/60 Hz - Power consumption: 0.25 kW - Protection class: IP54 - Operating environment: +5°C to max. +35°C - Conveyor speed: 22 m/min - Average output: 1200 cartons/hour - Working height: 650 mm - Weight: 293 kg - Machine dimensions (L x W x H): 2,470 x 990 x 1,782 mm - CE safety features: lateral sheet metal guards with access door, plus infeed doors L 850 mm, top and bottom cover Image may show optional extras subject to surcharge Fodoykugxopfx Actepi

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23NEOS06, Demonstration unit: ATLANTA NEOS stretch wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Includes 1 remote control – additional units available as an option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any doorway) Film power stretch 120-400% Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically controlled via control unit Quick-change system (IEF) for easy film roll replacement Film specifications: Max. external diameter Ø300 mm – height = 500 mm – core Ø76mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height “machine with mast” (pallet included) 2,150 mm Height detection by photoelectric sensor or by entering dimensions on display Protective bar for emergency stop Emergency stop switch according to CE regulations Acoustic warning signal and warning light during machine start-up Anti-drop safety device for film carriage Push-buttons for start & stop Machine operation according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program change - Adjustable machine rotation speed around the pallet up to 80 m/min - Carriage ascent and descent speed independently adjustable • Carriage ascent speed: 1.3 to 5.4 m/min • Carriage descent speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Setting the pallet wrapping height - Film tension for bottom/top wraps and carriage ascent/descent independently adjustable - Film pre-stretch for bottom/top wraps and carriage ascent/descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrap (upward/downward) - Simple wrap (upward or downward only) - Wrapping cycles with predefined start and stop heights Fsdpfxsyktv Se Actjpi - Wrapping to a preset height (ignoring the photoelectric sensor) - Wrapping cycle for large pallet dimensions - Wrapping cycle for top sheet application - Soft-start cycle for edge protection installation - Wrapping cycle with reinforcement and adjustable number of wraps Soft-start to prevent film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Additional units are immediately available from our Ludwigsburg stock. #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Gamybos metai: 2021, veikimo valandos: 10 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S21MythoEasyLow04, Ex-demo machine – like new. MYTHO EASY Low Very low-profile design Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable, 30 mm low profile – 500 mm long Max. load weight: 1200 kg PowerStretch 200%; gear changeable to 150-200-250% Fjdpfx Aex Ta Nxectepi Automatic adjustable double-rope formation – see photos. Automatic film cutting Optional: Film clamp on turntable German Schuko plug 6 individually programmable settings Further demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm 99 programs Fpodpfjykud Rsx Actoi 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S22EVA_07, Demonstration machine - like new. EVA Base frame raised by 150mm - 200mm, for loading with electric pallet truck or forklift - height adjustable Turntable diameter: 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, adjustable up/down Acoustic signal at wrapping start and stop at end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops at the same home position Anti-drop protection for film carriage Push buttons for machine power-on as well as start & stop function according to CE standards Ø 22 mm Fpedpfxoykuhcj Actsi ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All functional parameters adjustable via display F02 - Continuously adjustable turntable speed 5-12 rpm Carriage speed for up and down travel adjustable independently F03 - Upward carriage speed from 1.3 to 5.4 m/min F04 - Downward carriage speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Setting for pallet wrapping height F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - Cross-wrapping (upward/downward) F01 - 2 - Simple wrapping (up or down only) F01 - 3 - Manual wrapping F12 - Wrapping to a predefined height (disables photoelectric sensor) F29 - Soft-start cycle for application of edge protectors Soft-start function reduces film breakage on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Max. external diameter Ø 250 mm - Core Ø 76mm - Height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A Additional units available from stock for immediate delivery.

Gamybos metai: 2025, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level access for pallet trucks and electric pallet jacks MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% pre-stretch, optionally with more or less pre-stretch available TURNING TABLE / TP Ø1,650 mm / Opening at 6 o'clock - Mast at 12 o'clock (can be adjusted at any time) ARYA system for automatic film application and cutting, incl. infrared remote control Fedpfx Acoyktrtetepi

Būklė: naujas, The SAPI Mammut sandblasting units with QUICK STOP™ system are powerful industrial sandblasting machines used in various sectors such as automotive, construction, and manufacturing. These systems are engineered for fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other substrates. The SAPI QUICK STOP™ device is a safety feature designed to prevent accidents and damage to the unit. It operates by immediately stopping the blasting process as soon as the operator releases the control handle, instantly cutting off the abrasive flow. This safety system helps prevent workplace accidents and protects the machine from damage caused by overuse. Efficiency and Durability The QUICK STOP™ system reduces air and fuel consumption, resulting in a more efficient and cost-effective sandblasting process. The Mammut sandblasting machine is robustly constructed from high-quality components, ensuring reliable operation even in the harshest environments. All of our machines are fully CE- and TÜV-compliant. Flexibility and Versatility Fpsdpjupyw Esfx Actoi The machine is available in various tank sizes to accommodate different blasting requirements. A wide range of abrasive materials can be used, from regular sand to special plastic or metallic media. Our Mammut with QUICK STOP™ is suitable for numerous applications including surface preparation, cleaning, and the removal of rust, paint, and coatings. Precision and User-Friendliness Our Mammut with QUICK STOP™ offers precise control and adjustment of the blasting pressure even during operation, delivering consistent results and high accuracy. Additionally, all of our units feature easily accessible inspection and maintenance openings. Safety The QUICK STOP™ system with a deadman control handle ensures maximum safety during blasting operations. QUICK STOP™ also prevents moisture buildup inside the machine by maintaining constant pressure, even when blasting is stopped – a clear advantage over standard on/off systems. All Mammut sandblasting units with QUICK STOP™ come fully equipped as standard. Our packages typically include a blasting hose, nozzle, pressure regulator, moisture separator, abrasive metering valve, and basic personal protective equipment.

Būklė: naujas, Gamybos metai: 2025, PROD-MASZ sheet metal bending machines, press brakes, and guillotine shears utilize the precision of CNC technology. Our range is designed for industrial applications, and every product boasts incredible durability and resilience, regardless of operating conditions. The specifications adhere to stringent technical standards and rigorous CE regulations. Compliance with EU requirements is the best proof of the reliability and value of our equipment. Additionally, all machines are covered by a 12-month warranty. Fpjdec Swhyjpfx Actji Versatile, high-performance, heavy-duty, and exceptionally robust segmented folding bench – this is not a standard bending machine, but a much stronger and more durable solution. A segmented folding bench features continuous segment division over the entire working length of 1.40 meters. Both the upper and lower segments are easily and quickly removable, and the bending beam is also segmented. The bending angle ranges from 0 to 155 degrees. Locking is controlled by foot pedal, keeping your hands free for easy sheet positioning – opening and closing are operated by foot. The bending beam is equipped with two gas pressure springs, making adjustment exceptionally convenient. A practical segmented tool box is located at the rear of the machine. Technical data: - Maximum working width: 1400 mm - Maximum bending angle: 160 degrees - Maximum sheet thickness (steel): 1.5 mm - Weight: 300 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams are equipped with segmented jaws (fully segmented) - Back gauge for preset bending angles - Degree scale Price: €5,700 Swivel castors included. Delivery time: Weekly Cash payment upon delivery Delivery cost: €180 We look forward to hearing from you!

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Mixer-grinder / Meat Mincer Kolbe MWE-32 In good used and fully functional condition. Fpjdewcgr Eopfx Actji Belt and motor are new. The unit operates on 400 volts, is fully made of stainless steel, comes with mixing paddle, 98 cm Enterprise, workshop tested, ready for immediate use. Loading FD 200, year of manufacture 2009. The machine itself is year 2007. Further details on request. Payment by cash or prepayment. Sale only to commercial buyers. No warranty, no guarantee.

Būklė: naudotas, tuščias svoris: 8 800 kg, didžiausias leistinas svoris: 39 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 10/2006, pakaba: oras, padang padangų: 80 procentas, keliamoji galia: 30 200 kg,

Būklė: naudotas, tuščias svoris: 9 300 kg, didžiausias leistinas svoris: 39 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 11/2008, pakaba: oras, padang padangų: 70 procentas, keliamoji galia: 29 700 kg,

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2003, Įrenginys buvo naudojamas šaldytų vaisių rūšiavimui bei svetimkūnių pašalinimui. Išsamesnė techninė informacija: žr. PDF. Po rūšiavimo atliekamas svėrimas ir pakavimas į maišelius (slangaus tipo). Funkcijų eiga: vaisiai transportuojami pakreipiamu juostiniu transporteriu ant vibracinio stalo, kur vaisiai atskiriami. Toliau perduodama į BEST lazerinę sistemą LS 9000, kuri aptinka svetimkūnius ir išpučia juos maždaug 80 oro purkštukų pagalba. Lazerį galima perprogramuoti – vadinamoji gera produkcija, be defektų, leidžiama perrūšiuoti – lazeris, naudodamas taškų debesį, nustato paviršiaus struktūrą ir žino, kas yra gera, o kas – brokuota produkcija. Po lazerio – konvejeris su metalo detektoriumi ir vizualine kontrole. Toliau – vėl pakreipiamas transporteriu iki svėrimo ir pakavimo į slangaus tipo maišelius, maksimalus svoris iki 30 kg kiekvienam maišeliui. Maišelio pakavimo mašina taip pat iš Vollenda firmos. Pilna dokumentacija. Daugiau techninės informacijos – žr. PDF dokumentus (originalios sąskaitos faktūros). Naujos įrangos kaina buvo 382.000 €, nedaug darbo valandų. Fedpfowrdfujx Actspi

Būklė: naujas, Gamybos metai: 2025, Delivery every Monday and Tuesday – RELIABLE! Triple-segmented folding machine with foot operation EU production Folding bench with foot operation Segmented upper beam, lower beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for easy and quick adjustment - Folding bench with complete foot control - Piano-key inserts in the upper, lower, and bending beams provide a wide variety of bending options - Upper, lower, and bending beams segmented (piano-key) - Segments are adjustable and removable - Precision-ground bending segments made of extremely tough and hard special alloy steel - Bending beam is very easy to operate, equipped with high-strength compression springs / spring dampers - Heavy-duty, robust construction for decades of reliable operation - Convenient opening and closing of the upper beam Technical data: - Max. working width: 1400 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 295 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams equipped with segment jaws (fully segmented) - Adjustable stop for preset bending angles - Degree scale - Passage: 100 mm Transport rollers included. Shipping within Germany: 180 euros SCRIBING TEMPLATE FREE! We issue invoices both with 0% VAT (intra-community supply) and with 19% VAT. Fodpfx Acsc I T Txjtspi We look forward to hearing from you!

Būklė: naudotas, tuščias svoris: 8 800 kg, didžiausias leistinas svoris: 39 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 10/2006, pakaba: oras, padang padangų: 80 procentas, keliamoji galia: 30 200 kg,

Gamybos metai: 2022, būklė: beveik kaip naujas (naudotas), Magnetinis filtras: Pakabinimo aukštis: 360 mm Magneto matmenys (PlxIl): 90 x 92 cm Tinka 1000 mm pločio juostai Oro aušinimas Fedpfxoyftf Aj Actepi

Būklė: naudotas, Gamybos metai: 2013, veikimo valandos: 3 000 h, Funkcionalumas: nepatikrintas, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, For sale as a complete package: Waterjet cutting machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area: 3000x1500 mm. High-pressure pump Ecotron 40.37, year 2013. Water softening system, year 2018, like new. Abrasive backflush system, year 2013. Abus column-mounted slewing crane, 2t, year 2018, like new. Devo-Tech vacuum lifting system, load capacity 1800 kg, like new. Various accessories and sandbags. The system was purchased at the end of 2018 and commissioned at the beginning of 2019. At that time, the waterjet system and pump were fully overhauled by the supplier. Fpsdpfoyq Rdyox Actsi Unfortunately, the cutting system was hardly used by us. It only ran a few hours per year. It has not been in operation since around July 2025. The high-pressure pump has a defect. It is not tight and is leaking water. Both high-pressure cylinders have been replaced in recent years. The last service was in 2025. According to the service technician, repairing the pump would cost approx. CHF 5,000 to 6,000. The crane system and vacuum unit can also be purchased separately. Please submit your offer with a price expectation. The new price for the crane and vacuum unit in 2019 was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please register or submit offers by email, not by phone.