Pka 4 pirkti naudotą (60 507)

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, Mobile air filtration and extraction unit Box with built-in fan and filter cartridge. Equipped with HEPA filter. Suitable for ventilation, filtration, and extraction of indoor air. Lasdpjvvcqxjfx Alrod Extraction performance: approx. 1,800 m³/h Exhaust fan: IMOFA DS 11-4, 460 Watts, 50 Hz, 4.8 Amps Voltage: 230 V, 50 Hz Systemair RTRE 5 transformer controller 4 filter cartridges 1 x ULTIMA RP HEPA filter, 3,000 m³/h Aluminium frame housing, mobile with lockable castors Dimensions: 100 x 100 x 80 cm Weight: approx. 120 kg

Būklė: naudotas, rida: 92 589 km, galia: 107 kW (145,48 AG), pirmoji registracija: 07/2021, kuro tipas: dyzelinas, ašių konfigūracija: 4x2, ratų bazė: 3 100 mm, kuras: dyzelinas, CO₂ emisijos: 196 g/km, kuro bako talpa: 80 l, spalva: juodas, pavaros tipas: automatinis, pavarų skaičius: 6, emisijos klasė: Euro 6, sėdimų vietų skaičius: 2, bendras ilgis: 5 000 mm, bendras plotis: 1 960 mm, bendras aukštis: 1 970 mm, Gamybos metai: 2021, Įranga: ABS, Bluetooth, borto kompiuteris, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, elektroninė stabilumo programa (ESP), kruizo kontrolė, navigacijos sistema, oro kondicionavimas, oro pagalvė, pilna techninės priežiūros istorija, priekabos jungtis, start-stop sistema, stumdomos durys, vairo stiprintuvas,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Siūlome šią labai gerą Format-4 tempora F600 briaunavimo staklę, pagaminimo metai 2023. Ljdjzak D Sopfx Alroad Jei turite klausimų arba reikia daugiau informacijos, drąsiai rašykite mums žinutę arba skambinkite.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, keliamoji galia: 4 000 kg, Severt kolonėlės pakėlimo sukimo įrenginys rankinis su atitinkama skylėtu stalu, 1500 x 1500 x 200 mm, tvirtinimui, komplekte. Pageidaujant su skylėto stalo priedų rinkiniu ir įrankiais. Puikios būklės (žiūrėti vaizdo įrašą). Lasdpoyli Uyefx Alrsd Hidrauliškai reguliuojamas aukštis – min. 800 mm, maksimalus aukštis 2400 mm. Keliamoji galia 4000 kg. Skylėtas stalas 1500 x 1500 x 200 mm, tipas 28 mm.

Būklė: naudotas, rida: 51 268 km, galia: 104 kW (141,40 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, ašių konfigūracija: 4x2, ratų bazė: 4 030 mm, pirmoji registracija: 03/2022, kuro bako talpa: 90 l, CO₂ emisijos: 249 g/km, emisijos klasė: Euro 6, spalva: pilkas, sėdimų vietų skaičius: 3, ankstesnių savininkų skaičius: 1, Gamybos metai: 2022, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, oro kondicionavimas, stumdomos durys, trauki kontrolė, vairo stiprintuvas,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, bendras svoris: 220 kg, įvorės išorinis skersmuo: 600 mm, Pjaustymo priedai TDG Spain - 4-600 Ljdpfxjy T Ik Rj Alroad MACH-ID 9627 Gamintojas: TDG Spain Tipas: 4-600 Pagaminimo metai: 2013 Skersmuo: 600 mm 4 žandų griebtuvas: taip Maks. greitis: 970 aps./min. Ilgis: 1200 mm Plotis: 800 mm Aukštis: 400 mm Svoris: 220 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Allgemeine Beschreibung Zum Verkauf stehen 6 Stück Hydraulikpressen, Modell YL32-200, robuste Vier-Säulen-Bauweise, ideal für Metallumformung, Pressarbeiten, Stanzen, Biegen und allgemeine Industrieanwendungen. Die Maschinen wurden ursprünglich aus China importiert und basieren auf dem weit verbreiteten Y32-Serienstandard, was eine einfache Wartung und weltweite Verfügbarkeit von Ersatzteilen gewährleistet. ⸻ ⚙️ Technische Daten (typisch für YL32-200) * Presskraft: ca. 200 Tonnen * Bauart: 4-Säulen-Hydraulikpresse * Hub: ca. 400 – 700 mm * Tischgröße: ca. 700 x 700 mm – 1000 x 1000 mm * Lichtöffnung (Öffnungshöhe): ca. 800 – 1200 mm * Hydraulikdruck: bis zu 25 MPa * Motorleistung: ca. 7,5 – 15 kW * Steuerung: manuell / halbautomatisch * Stromversorgung: 380V / 50Hz (industriestandard) * Gewicht je Maschine: ca. 5 – 8 Tonnen ⸻ 🏭 Anwendungsgebiete * Metallumformung & Stanzen * Tiefziehen * Richten und Pressen * Kunststoffverarbeitung * Werkstatt- und Serienfertigung ⸻ 📦 Zustand * Gebrauchtzustand * Verkauf wie gesehen / ab Standort * Besichtigung nach Vereinbarung möglich ⸻ Lajdpfxoy E Abno Alrsd 📊 Verfügbarkeit * Menge: 6 Maschinen verfügbar * Einzelverkauf oder als Paket möglich ⸻ 🚛 Logistik * Standort: Deutschland * Verladung möglich (je nach Aufstellung Stapler/Kran erforderlich) * Internationaler Versand kann organisiert werden Preis pro Stück!!!! Demontage durch Käufer!!! Oder gegen Aufpreis organisiert!!!

Būklė: labai geros būklės (naudotas), Gamybos metai: 1994, Four-sided planer, 8-head HARBS. Long infeed table: 3 meters. Machine weight: 5,500 kg. Cardan drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm. Lasdpfxel Dw Nxo Alred

Būklė: naujas, Hardfacing welding electrode Brand: Duramit W4 Material: 1.2567 Diameter: 6 mm Lajdpfx Alshhyitered Length: 450 mm 40 pieces per package 6 packages available €95 per package

Būklė: naujas, Hardfacing welding electrode Brand: Duramit W4 Material: 1.2567 Diameter: 3.25 mm Length: 350 mm Lajdpfohhyizox Alrjd 120 pieces per package 2 packages available €95 per package

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, 1. Weishaupt dujų degiklis WM-G10 / 4-A. Su Dungs DN 50 dujų trasa. Modelis: ZM Pagaminimo metai: 2011 Galia: 110 - 1250 kW. Prisijungimo slėgis: 15-500 mbar. 2. Weishaupt dujų degiklis WM-G10 / 4-A. Su Dungs DN 50 dujų trasa. Modelis: ZM Pagaminimo metai: 2005 Galia: 120 - 1250 kW. Prisijungimo slėgis: 15-500 mbar. Ljdjzaa Uaopfx Alrjad

Būklė: labai geros būklės (naudotas), • Gamintojas: ABUS KG – Vokietija • Tipas: K-300 1-4 • Variklio galia: 3,8 kW • Maitinimas: 400 V / 50 Hz • Įrengtas elektromagnetinis stabdis – stabdymo momentas 90 Nm • Dantytas velenas – skersmuo apie 34 mm • Tvirtinimas: kvadratinis flanšas • Tvirta pramoninė konstrukcija, skirta naudoti ABUS tiltinėse kranose ir keltuvuose • Būklė: naudotas, veikiantis (tikros nuotraukos) Laedpfx Ajxbfutjlrjd

Būklė: geras (naudotas), 4 x Bonfiglioli wind turbine gearboxes JB00001227 SN B6201603697 Lajdowg E Utspfx Alrsd

Būklė: labai geros būklės (naudotas), Gamybos metai: 2025, Format 4 Kappa 450 x-Motion Ledpfx Aoy Rp D Tjlread 2 ašių valdymas, aukštis ir pasukimas Techniniai duomenys: - Pjovimo ilgis: 2800 mm - Pjovimo plotis: 1300 mm - Pjovimo aukštis: 155 mm - Didžiausias pjūklo diskas Ø: 450 mm - X-motion valdymas - Kampų tinklelis su ilgio kompensacija - Ištraukimo jungtis: Ø 120 mm - Variklio galia: 10 kW - Pagaminimo metai: 2025 Dvigubas kampinis liniuotė

Būklė: naudotas, rida: 69 073 km, galia: 104 kW (141,40 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, ašių konfigūracija: 4x2, ratų bazė: 3 640 mm, pirmoji registracija: 10/2022, kuro bako talpa: 75 l, CO₂ emisijos: 251 g/km, emisijos klasė: Euro 6, spalva: pilkas, sėdimų vietų skaičius: 3, ankstesnių savininkų skaičius: 3, Gamybos metai: 2022, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, oro pagalvė, priekabos jungtis, priešrūkiniai žibintai, statymo jutikliai, stumdomos durys, trauki kontrolė, vairo stiprintuvas,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, 1. WEISHAUPT WM-G10/4-A (su dujų kolektoriumi) - Galia: 100-1100 kW - Modifikacija: ZM-LN - Pagaminimo metai: 2020 2. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 100-1000 kW - Modifikacija: ZM - Pagaminimo metai: 2015 (1 vnt.), 2013 (yra 2 vnt.) 3. WEISHAUPT WM-G10/2-A Modifikacija: ZM-LN Galia: 75-630 kW Pagaminimo metai: 2021 4. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 125-900 kW - Modifikacija: ZM-LN - Pagaminimo metai: 2011 5. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 100-1000 kW - Modifikacija: ZM Lasdpfxewgyrts Alrjd - Pagaminimo metai: 2011 6. WEISHAUPT WM-G10/3-A (su dujų kolektoriumi) - Galia: 100-1000 kW - Modifikacija: ZM - Pagaminimo metai: 2009

Būklė: naudotas, rida: 183 238 km, galia: 104 kW (141,40 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, ašių konfigūracija: 4x2, ratų bazė: 3 450 mm, pirmoji registracija: 03/2021, kuro bako talpa: 80 l, CO₂ emisijos: 274 g/km, emisijos klasė: Euro 6, spalva: balta, sėdimų vietų skaičius: 2, ankstesnių savininkų skaičius: 3, Gamybos metai: 2021, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, navigacijos sistema, oro kondicionavimas, statymo jutikliai, stumdomos durys, vairo stiprintuvas,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: NR: 220.10.029.19, Funkcionalumas: visiškai funkcionalus, galia: 15 kW (20,39 AG), įėjimo įtampa: 400 V, įėjimo srovė: 28 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 60 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, Aukštos kokybės Format4 Tempora 60.06 EL briaunų klijavimo staklės parduodamos – paruoštos darbui! Pakelkite savo gamybą į aukštesnį lygį su šiek tiek naudotomis Format4 Tempora 60.06 EL briaunų klijavimo staklėmis, kurios yra puikios būklės. Sukurtos pramoniniam darbui, šios staklės užtikrina didžiausią tikslumą ir nepriekaištingus paviršius kiekvienai plokštei. Aukšto tikslumo automatinis briaunų klijavimas Priešfrezuojantis agregatas tobulam briaunos paruošimui Patikima, stabili klijavimo sistema Pilnas apdirbimas: apipjovimas, frezavimas, poliravimas Paprastas valdymas ir patikimas našumas Papildoma komplektacija: Laodpoy Dg N Tefx Alrod Raudonas oro bakas (kaip matyti nuotraukose) Papildomas pašildomas klijų katilas – idealus greitam skirtingų spalvų klijų keitimui Rūpestingai prižiūrėtos, mažai naudotos ir visiškai veikiantys įrenginiai – paruoštos nedelsiant naudoti gamyboje. Staklės parduodamos dėl gamyklos pertvarkymo. Susisiekite dėl daugiau informacijos ar apžiūros.

Būklė: naujas, Gamybos metai: 2025, Tout inox Mélangeur Tumbler – livraison rapide d’une machine Fabrication neuve sur commande Cuve en acier inoxydable de haute qualité, inox 316 Vitesse de rotation variable de 0 à 24 tr/min Déchargement par basculement électrique Capacité de 50 kg à 90 kg selon le type de produit Laedpfx Aljif Upfjrod 2 modèles disponibles

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. Lajdpefdkb Tsfx Alrsd The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: Ljdpfx Asd Tbbdslroad - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Ljdjd Tqaljpfx Alread - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards Lodpofdkb Uofx Alroad - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level. Laedpfjguk A Hex Alrod

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. Lajdpsguk Dkjfx Alrjd When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.