Weima Briketavimo Presas pirkti naudotą (7 339)

Būklė: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Rjdpefmqq Eofx Ahgow Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Travel and accommodation at actual cost or by flat rate charged to the client. Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Rodpfsffh Atox Ahgjw Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm Rodpjd N Dnhofx Ahgew - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine available at a special price Another unit available immediately (ex works Neckartailfingen) * Includes 1 year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine with proven performance Includes control cabinet with timer operation The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to max. 20 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals will increase wear --- Options at extra charge: - Timer function + €490 net Machine is started manually and switches off automatically after a preset period. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt Motor with 3 kW instead of 2.2 kW, Additional charge + €890 net (delivery time approx. 8 weeks) Redpfx Ahed Nnwlegew - Special pressing unit + €2,950 net

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 29 h, Another machine available immediately ex works Neckartailfingen *Subject to prior sale *Silo available at an additional charge Press exclusively deliverable with a plant component, such as shredder, granulator, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette suppliers. Type Classic – throughput up to 425 kg/h *depending on material Options available at extra charge: Plant engineering / mütek Systemtechnik: - mütek MRZ shredder technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - Various control system interconnections - Semi-automatic packaging technology Your advantages: Key point: + Very established, mature die press from 25 years of experience. The challenges and know-how are in the details, e.g. top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data, briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your feed material *based on a bulk density of 200 kg per cubic meter Rodpfx Ahsfhql Tjgjw Specific information after successful test with your material. If no test material is provided, we cannot guarantee briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - Moisture content (air-dried) must be between min. 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Installation temperature: +8°C ambient - Feed material must be free from metals and mineral contaminants such as sand, stones, etc.; otherwise, damage to the pressing tools and/or increased wear may occur.

Būklė: geras (naudotas), Refurbished Used Machine *Options available at extra cost, see below with full 1-year warranty Available for delivery approx. 16 weeks after order Technical Specifications: Throughput capacity up to max. 1200 kg/h depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter 75 mm including 2 m press channel Main drive motor 45 kW Feed screw geared motor 2 x 2.2 kW Compactor screw 2 x 5.5 kW Distributor screw 2.2 kW Hydraulic pump motor 0.37 kW Total connected load 65 kW Control panel with plain text display for operational states and load indicator for main drive and feed screws PLC control Siemens S7/300 with hour meter in the control cabinet Machine has CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (L x W x H) Weight: 4500 kg Options: Silo for MAP series (only suitable for one press of type MAP 1200) - Buffer silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT Redpfx Ahj E Dquogew - Temperature control unit for press tools For maintaining temperature to achieve optimal briquette quality. Temperature control for pump, cooler, fan, pressostat Ready-wired for operation – mandatory for use including corresponding control system €7,850 net - Guillotine for briquette length cutting Compressed air connection required on site €6,940 net plus VAT - Conveyor line / cooling section (Nominal value: 4x2m) per 2 meters €990 net Assembly / Commissioning (Nominal value per press approx. 2-3 days on site) Charged according to effort based on evidence, invoiced separately. The following rates apply: Service technician/mechatronics technician per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Per diem allowance per fitter per day: depending on country Per car/van and travel kilometer: €0.98 / km Arrival and accommodation expenses reimbursed by invoice or by fixed rate at the buyer's expense. Test with customer's own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net ---- Raw material requirements: - The (absolute dry) moisture content must be between a minimum of 6 and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room, minimum +5°C - Feedstock must be free of metals and mineral contaminants. Damage to the press tools and/or increased wear may otherwise occur.

Būklė: geras (naudotas), Gamybos metai: 2001, Gera, naudota būklė Mažai darbo valandų (1675 val.). Rodpfxowcc D Rj Ahgsw Variklis: 11 kW Slėgis: reguliuojamas iki maks. 250 bar Našumas iki maks. 220 kg/val. Briketas: 150x60 mm Presavimo matmenys: apie 2200x3000x1920 mm (IxPxA) Valdymo spintos matmenys: 500x1250x2120 mm (IxPxA) Svoris apie 3000 kg

Būklė: geras (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, - Pagaminimo metai: 1990 Redpfey Dtb Ajx Ahgew - 3 x 90 kW pavara - Įskaitant presavimo įrenginio tiekimą ir gaminio išleidimo konvejerį (įskaitant užpildymo bunkerį); pagaminta ATM; pagaminimo metai: 2012 Visa linija yra labai geros būklės ir iš karto paruošta naudojimui

Būklė: naujas, Briquette diameter: 60 mm Tank diameter: 100 mm Output: 15/70 kg/h Maximum briquette length: 60 mm Number of cycles: 7 cycles/min Number of cylinders: 3 Power supply: 40 V, 50 Hz Motor power: 5.5 kW Overall dimensions Length: 1700 mm Rsdpfsdz Dmgsx Ahgew Depth: 1170 mm Height: 1510 mm Weight: 650 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, I am selling a heavy-duty briquetting press RUF RB440. Year of manufacture: 11/2002 / Completely refurbished with warranty until 2025 Motor power: 30 kW Output: approx. 400 wood briquettes per hour Wood briquette RUF format: 150 x 60 x 40–110 mm (depending on material) Material moisture up to 15% Nominal pressing pressure: 14,200 N/cm² Oil cooler included Dimensions: 3000 x 1800 x 2000 mm Total weight: 3000 kg Equipment: right-hand side – right entry socket. Condition: Fully overhauled / 500 operating hours warranty, like new. Immediately available. Rjdswun I Eopfx Ahgow Comes with full documentation and CE certification.

Būklė: naudotas, Filtrų maišų kiekis: 50 vnt. Ventiliatorius: 11 kW. Ventiliatorius 2: 3 kW. Briketai: apie 60 x 40 mm. Presas: 4,5 kW. Dažnio valdymo Höcker Polytechnik ištraukimo įrenginys su briketavimo presa RSN tipo ECO 40/12, skirtas drožlių ir šlifavimo dulkių ištraukimui iš mažos ar vidutinės stalių dirbtuvės ar kitos medienos apdirbimo su bunkeriu ir briketavimo presa. Įskaitant šilumos grąžinimą ir kelis ištraukimo vamzdžius su pneumatiniais sklendėmis, skirti apie 5–10 mašinų dirbtuvių įrangai. Rsdey Nn A Sspfx Ahgjw

Būklė: naudotas, Gamybos metai: 2010, bendras plotis: 2 080 mm, bendras aukštis: 1 900 mm, bendras ilgis: 2 440 mm, Spalva: Pilka Briketavimo presas; Höcker Polytechnik BrikStar C 3-19-L 4,3 kW, 400 V 25 kg/val. Piltuvo tūris: 3 m³ Alyvos bakas: 50 l Matmenys: 2015 x 2360 x 1300 mm, 830 kg - Pagaminimo metai: 2010 - Dokumentacija prieinama: Taip - CE sertifikatas: Nėra - Transportavimo matmenys: 2440 mm x 2080 mm x 1900 mm (i x p x a) - Transporto pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas į sąskaitą bet kada galimi visai pramoninei įrangai Rodpexqdxcefx Ahgjw Yorick Diebels

Būklė: naudotas, Gamybos metai: 2012, bendras plotis: 1 700 mm, bendras aukštis: 1 500 mm, bendras ilgis: 1 200 mm, Spalva: Pilka Svoris be krovinio: 500 kg Kaina: Pagal užklausą Ypatumai: - Aprašymas: Komplektas, sudarytas iš briketavimo presų su ištraukimu Pagaminimo metai: 2012 Dokumentacija prieinama: Ne CE sertifikatas: Nėra Serijos numeris: 2012 1140 Rjdjyy Rt Uopfx Ahgsw Transportavimo matmenys: 1200 mm x 1700 mm x 1500 mm (ilgis x plotis x aukštis) Transporto svoris [kg]: 500 kg Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir keitimas galimi bet kada visiems pramonės sektoriaus įrenginiams Yorick Diebels

Būklė: naudotas, Gamybos metai: 2022, bendras plotis: 1 800 mm, bendras aukštis: 1 900 mm, bendras ilgis: 1 800 mm, bendras svoris: 3 000 kg, galia: 35 kW (47,59 AG), Hidraulinė briketų presas Gamintojas: Winter Tipas: BP 450 Pagaminimo metai pagal tipinę lentelę: 2022 Techniniai duomenys: Maksimali našumas: 450 kg/val. Variklis: 35 kW / 400 V, 50 Hz Drožlių suspaudimas: min. 1 000 kg/cm² maks. 1 500 kg/cm³ Medienos drėgnumas: < 14 % Briketų matmenys: ilgis 150 mm, plotis 60 mm Matmenys (I x P x A): 1 800 x 1 800 x 1 900 mm Svoris: 3 000 kg Medžiagos padavimo sraigtai yra komplekte. Grynoji pirkimo kaina: 36 400 € plius įstatymų numatytas PVM PVM nurodomas atskirai mūsų sąskaitoje. Pasiliekama teisė keisti, klysti ir parduoti ankščiau. Rjdpfsymwxvox Ahgsw Pardavimas vykdomas be garantijos ir be jokių įsipareigojimų – tik verslo subjektams. Užklausos apdorojamos nuo pirmadienio iki penktadienio, 8 – 16 val.

Būklė: geras (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, WEIMA TH 400 Briquetting Press – after technical inspection – German production – very good condition – year of manufacture: 1992 TECHNICAL SPECIFICATIONS: Main motor power: 7.5 kW Machine throughput: approx. 80 kg/h Briquette diameter: 50 mm Rjdpfot U Et Nsx Ahgjw Feed hopper dimensions: 2000 x 1800 mm Screw conveyor feeding material to the piston Agitator Machine dimensions (L/W/H): 240 / 190 / 200 cm Weight: ~ 850 kg WEIMA TH series hydraulic briquetting presses are compact devices for briquette production. The presses can be filled manually or automatically directly into the hopper. Thanks to their compact size and quiet operation, machines from this series are ideal for installation on a production floor. Features: – reduction of production waste volume – low purchase cost – low energy consumption – compact design takes up little space – excellent quality of processing – durable construction and long service life – trouble-free maintenance and low wear – easy operation Main application areas for briquetting presses include, for example: – in combination with dedusting or filtration and extraction systems – for manual material feeding – as a unit combined with a shredder (e.g., WEIMA WL4) – with a screw or belt conveyor – with a mobile extraction system or combustion furnace

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras plotis: 1 315 mm, bendras aukštis: 1 410 mm, bendras ilgis: 2 030 mm, briketo skersmuo: 40 mm, alyvos bako talpa: 100 l, sraigtinio konvejerio ilgis: 1 595 mm, galia: 4 kW (5,44 AG), paskutinio kapitalinio remonto metai: 2025, pildymo angos plotis: 1 044 mm, Įrenginys visiškai veikiantis, labai geros būklės. Jei reikia daugiau informacijos, susisiekite su mumis. Rjdpfx Ahjx I Abaegjw

Būklė: naujas, Gamybos metai: 2025, Capacity: 40 - 100 kg/h Briquette diameter: 60 mm Briquette length: 40 - 70 mm Automatic start: yes Oil preheating system: yes Redpfxoknyhps Ahgow Max. material moisture: 15% Hopper diameter: 1000 mm Dimensions: 1850 mm x 1170 mm x 1510 mm (LxWxH) Motor power: 7.5 kW Control cabinet: with PLC and Siemens touch screen Weight: 770 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Naudota Comafer 50/40 briketų gaminimo mašina. Briketų gaminimo mašina po kapitalinio remonto. Redpfxsxzu Rde Ahgjw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, briketo skersmuo: 50 mm, bendras svoris: 340 kg, įvesties srovės tipas: trifazis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, alyvos bako talpa: 60 l, spaudimo jėga: 8 t, darbinis slėgis: 270 juosta, Įranga: aušinimo blokas, Hidraulinė briketavimo presas su 4 kW pagrindiniu varikliu. 50 mm skersmens briketai. Našumas: 30-50 kg/val. 50 litrų talpykla, alyvos aušintuvas. Rjdpfsf Hmi Eox Ahgjw

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2016, Felder Clean Air Extraction Unit | Dedusting System RL 200 | Ø 200 mm Max. air volume flow: 4000 m³/h Rated air volume flow: 20 m/sec, 2300 m³/h Negative pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press Redpjwa Rlkofx Ahgow FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: ready for operation Price: 15,500.- The plant has already been dismantled and is stored in Raasdorf.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Amis ZBP 50 S Duo sawdust briquetting machine Year of manufacture: 2019 Load capacity depending on material: up to 140 kg 3,800 operating hours Briquette diameter: 50 mm Tank capacity: 1.2 m³ Roll with feeder Pre-compaction Screw conveyor Hydraulic pump motors: 7.5 kW each Fan cooling Sawdust level sensor in the tank Hydraulic oil tank: 100 l SIEMENS control system Dimensions (L x W x H): 3000 x 2400 x 1700 mm Weight: 2000 kg Redpfx Ahjumwm Sogjw The price for a new machine is €39,800

Būklė: naujas, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. Its construction is compact, user-friendly, and manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use—simply plug it in and start working. Rodpfx Asyr Tpnehgjw

Būklė: naujas, For the industrial production of rectangular briquettes The ZBP 500 briquettes pressable materials into highly compressed briquettes. The briquettes are easy to store and, thanks to their stackability, easy to transport. In the press chamber of the hydraulic press unit, the briquettes are formed by a pressure cylinder. This allows for the production of up to nine briquettes per minute with a pressing force of 1 kg/cm². Standard equipment: - Safety limit switches for oil temperature and level Rsdpfxsyr I Hzo Ahgjw - Oil cooler - Automatic briquette length monitoring - Automatic fill level monitoring for hopper - Control cabinet with PLC control for fully automatic operation Options: - Hopper extension individually available according to customer requirements - Press stamp with custom inscription / logo

Būklė: naujas, mašinos/transporto priemonės numeris: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container dimensions (customized upon request) Rodpfxeyr I Hue Ahgsw Left- or right-hand design Hydraulic system with separate oil tank All series also available as “DUO” variants Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial companies within the wood processing sector. Enormous storage and transport costs are incurred for these materials on a daily basis. Briquetting presses provide an ideal solution, as briquettes are much easier and more space-efficient to store and transport. Additionally, the risk of spontaneous combustion is significantly reduced. The briquetting presses require little space, are of robust construction, and are equipped with low-maintenance technology. Whether wood, paper, biomass, foam, or polystyrene – the ZBP can briquette any suitable material. With a throughput capacity of up to 35 – 130 kg/h, they are particularly suitable for small and medium-sized businesses. Versatile installation options thanks to availability in both left- and right-hand designs. So start briquetting now!

Būklė: naujas, mašinos/transporto priemonės numeris: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideally suited for combustion in wood gasifiers as well as in smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, and similar waste materials are generated in all craft and industrial woodworking businesses. This creates significant daily costs for storage and transport. Briquetting presses offer an ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of self-ignition is considerably reduced. Redpfx Ahjyr I Hnegew The briquetting presses require minimal floor space, are robustly constructed, and are equipped with low-maintenance technology. Whether wood, paper, biomass, foam, or polystyrene – the ZBP series can briquette any suitable material. With a throughput capacity of up to 35 – 130 kg/h, they are particularly suitable for small and medium-sized enterprises.