Bilz Gewefa Mk3 M4 M8 pirkti naudotą (1 783)

Būklė: naudotas, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of Manufacture: 1977 Drilling Capacity: 32 mm Bodpeharwvofx Af Aewl Spindle Mount: MT 3 – Short quill Distance Spindle Nose – Table: 545 mm (short quill) Distance Spindle Adapter – Table: 395 mm (MT Adapter) Throat: 290 mm Quill Stroke: 160 mm Table Size: Ø 545 mm Column Diameter: 220 mm Spindle Speed: 55 – 1,450 rpm, infinitely variable Motor Power: 1 / 1.6 kW Electrical Connection: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and steplessly via variator gearbox - Intermediate stage for high torque at low speeds - MT Adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swivelling drilling table - Table height adjustment via hand crank - Heavy-duty machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Required space (L x W x H): 1,150 x 650 x 2,000 mm Weight: 850 kg Good condition

Būklė: naudotas, Drilling machine, bench drill, column drill, pillar drill -Hand over: in as-is condition as inspected Bwsdpfxofla Rij Af Aol -Motor: HEW 0.8 kW -Table size: Ø 355 mm -Spindle taper: MT3 -Traverse: 500 mm -Reach: 300 mm -Column diameter: Ø 110 mm -Spindle stroke: 150 mm -Transmission: via V-belt -Dimensions: 850/500/H1850 mm -Weight: 294 kg

Būklė: labai geros būklės (naudotas), Drill Press, Pillar Drilling Machine, Column Drill, Box Column Drill, Thread Cutting Machine, Tapping Machine Bwedjhv S Etopfx Af Asl - Machine: is in very good condition and runs very smoothly - Manufacturer: HIW Helmerding, Pillar Drilling Machine - Motor: 1.0/1.6 kW - Speeds: 95 - 1050 rpm, 8 steps - Feed rate: 0.08/0.16/0.28 1/rev - Table size: 500 x 400 mm, travel distance 685 mm - Spindle taper: MT3 - Spindle stroke: 180 mm - Throat depth: 280 mm - Dimensions: 1100/650/H2340 mm - Weight: 690 kg

Būklė: geras (naudotas), Drilling Machine, Pedestal Drilling Machine, Column Drilling Machine, Upright Drilling Machine Bwjdpfohaxknex Af Ael - Manufacturer: Ibarmia, Column Drilling Machine Type 40 TF/C - Motor: Siemens 1.1 kW - Speeds: 104 - 1450 rpm, forward and reverse - Table size: 360 x 300 mm, travel 600 mm - Spindle taper: MK3 - Spindle stroke: 150 mm - Feed: automatic - Throat depth: 300 mm - Column diameter: 125 mm - Coolant system - Dimensions: 480/680/H2220 mm - Weight: 358 kg

Būklė: geras (naudotas), Drilling machine, pillar drill, upright drill, column drill - Table size: 275 x 215 mm - Spindle taper: MT3 Bwedpfekw H D Rex Af Asl - Throat: 280 mm - Speeds: 200–1450 rpm - Column diameter: Ø 120 mm - Spindle stroke: 100 mm - Transmission via: gears - Quantity: 1 drilling machine available - Price: per unit - Dimensions: 360 / 600 / H1945 mm - Weight: 230 kg

Būklė: geras (naudotas), Drilling machine, pillar drilling machine, column drilling machine, upright drilling machine Bwjdpfx Afjd Ibcho Ael -includes: clamping table and fixed machine vice -table size: 275 x 325 mm -spindle taper: MK3 -throat depth: 300 mm -speeds: 90-1450 rpm -column diameter: 120 mm -spindle stroke: 125 mm drive: via gears -quantity: 1 drilling machine available -price: per unit dimensions: 770/660/H2060 mm weight: 284 kg

Būklė: geras (naudotas), Drilling machine, pillar drilling machine, column drill, upright drill - Manufacturer: Solid, Column Drilling Machine Type SHW 30 - Motor power: 1.1 kW Bwedpfx Aoqxvxljf Ajl - Speeds: 70 - 1980 rpm, 7 steps - Table size: 270 x 270 mm, travel 630 mm - Clamping table: tiltable with vice fixture - Spindle mount: MT3 with drill chuck - Spindle stroke: 120 mm - Throat: 280 mm - Column diameter: 110 mm - Accessories: incl. foot control - Dimensions: 860/640/H1850 mm - Weight: 273 kg

Būklė: geras (naudotas), Drilling machine, pillar drilling machine, column drilling machine, upright drilling machine - Manufacturer: Cordia, column drilling machine type S 26 - Motor power: 1000 W - Speeds: 95 - 1450 rpm, 6-step - Table size: 320 x 270 mm, travel distance 500 mm - Spindle taper: MT3 - Quill travel: 100 mm - Throat: 280 mm - Column diameter: 120 mm Bsdpfx Ajlx Nvnsf Aewl - Accessories: incl. lighting and additionally mounted vise, see photos - Dimensions: 700/760/H1950 mm - Weight: 325 kg

Būklė: geras (naudotas), Pillar Drill, Bench Drill, Column Drill, Upright Drill Bwjdpfshx E Ugex Af Asl -Manufacturer: Gosmeta, Column Drill Model B-30N -Motor: 1.1 kW -Speeds: 110 - 920 rpm, 5-step -Table size: Ø 330 mm, travel distance 510 mm -Spindle taper: MK3 -Spindle stroke: 125 mm -Arm reach: 300 mm -Column diameter: 120 mm -Dimensions: 490/750/H1850 mm -Weight: 282 kg

Būklė: geras (naudotas), Gręžimo staklės, stacionarios gręžimo staklės, kolonos gręžimo staklės - Gamintojas: Flott, kolonos gręžimo staklės 23 mm tipas - Špindelio laikiklis: MK3 - Variklis: 1,1 kW - Apsisukimų reguliavimas: per trapecinį diržą - Apsisukimai: 200 - 2000 aps./min. - Stalo dydis: 300 x 300 mm Bjdpfx Afeyaptxs Ajwl - Eiga: 440 mm - Špindelio eiga: 145 mm - Išnešimas: 300 mm - Kolonos skersmuo: 125 mm - Išmatavimai: 900/450/H1900 mm - Svoris: 306 kg

Būklė: geras (naudotas), drill press, upright drill press, pillar drill, column drill, tapping machine, thread cutting machine -Manufacturer: Möller, column drill model MOE 1132 -Spindle taper: MT3 -Motor: Loher 1.5 kW -Speeds: 110 - 1450 rpm, infinitely variable, forward/reverse -Feed rates: 0.1 / 0.2 / 0.3 mm/rev -Table size: Ø 370 mm, travel 735 mm -Spindle stroke: 170 mm -Throat: 280 mm -Column diameter: 130 mm -Dimensions: 940/650/H1830 mm Bwodoq Tfg Ujpfx Af Ajl -Weight: 398 kg with pallet

Būklė: geras (naudotas), Drilling machine, pillar drill, column drill press, upright drill press Bwedpfjqzl Hiex Af Aol - Manufacturer: Flott, column drill model SB 23 St - Speeds: 200 - 2000 rpm, stepless via variator pulley - Table size: 300 x 300 mm, travel 595 mm - Spindle mount: MK3 with drill chuck - Spindle stroke: 150 mm - Throat (distance spindle to column): 295 mm - Column diameter: Ø 110 mm - Dimensions: 920/450/H1920 mm - Weight: 345 kg

Būklė: geras (naudotas), Drilling machine, bench drill, pillar drill, column drill, multi-spindle head, multi-spindle drilling head, drilling gearbox Bsdec Rpnnspfx Af Aowl -with twin spindle drilling head Manufacturer: Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Adjustable drill distance: 18-110 mm -Max. drill size: 2 x Ø 6 mm -Table size: 275 mm -Spindle taper: MK3 -Throat depth: 220 mm -Speeds: 100-2900 rpm -Column diameter: Ø 100 mm -Spindle stroke: 75 mm -Gearbox -Dimensions: 900/400/H1910 mm -Weight: 230 kg

Būklė: geras (naudotas), Adapter holder, reamer, tool holder, machine reamers, reamer, reaming tool, pass meter cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, adapter holder - Manufacturer: Kämpf, Adapter Holder A16 TGL 30-1226 - Mount: MT3 - Price: per piece - Quantity: 11 pieces - Dimensions: Ø 28 x 310 mm Bwodof Sgw Sepfx Af Asl - Weight: 0.9 kg/piece

Būklė: geras (naudotas), Arbor holder, reamer, tool holder, machine reamers, reamer, reaming tool, plug gauge cutter set, milling arbor, milling tool, boring head, spindle tool, reducing sleeves, arbor holder Bwodpfjf Sgwvex Af Aol -Manufacturer: Kämpf, Arbor Holder A13 TGL 30-1226 -Taper: MT3 (Morse Taper 3) -Price: per piece -Quantity: 14 pieces -Dimension: Ø 24 x 295 mm -Weight: 0.8 kg/piece

Būklė: naudotas, Manufacturer: Mineralwerke Model: PZ 250 M4 Voltage: 380 V Power: 55 kW Bjdpfjh D Hmvjx Af Aswl Weight: 1950 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, Iš viso penkios identiškos Vestas vėjo jėgainės tikėtina bus prieinamos nuo 2027 m. pradžios. Nominali galia: 850 kW, rotoriaus plotas: 2124 m², rotoriaus sparnai: 3, nominalus sukimų dažnis: 26 aps./min, generatoriaus įtampa: 690 V, pavarų skaičius: 3, įjungimo vėjo greitis: 4 m/s, nominalus vėjo greitis: 16 m/s, išjungimo vėjo greitis: 25 m/s, bokšto medžiaga: plienas, stebulės aukštis: 74 m, „gondolos“ svoris: 22 t, rotoriaus svoris: 10 t. Yra dokumentacija. Galima apžiūra vietoje. Galimas atskiras pardavimas. Bsdjywlpxjpfx Af Aswl

Būklė: naujas, Gamybos metai: 2026, Cutting width: 450 mm Weight: 5,500 kg Working height: 850 mm WINTER Multiple Rip Saw MULTIMAX 175 M4 + VISUAL OPTIMIZATION SYSTEM VISUAL OPTIMIZATION SYSTEM: The operator places the raw boards onto the chain conveyor. Cross transport is initiated by pressing a manual button. While transporting under the visual measurement system, the board is measured from above. The determined usable board width forms the basis for 2D optimization. The line can be operated in two modes: 1. Automatic mode without quality consideration The detected usable board area is optimized according to the pre-programmed width/length combinations. 2. Semi-automatic mode with quality offset The usable board area can be corrected by defining different quality zones over the board width. Quality marking is done via the touchscreen. Optimized boards are handed over to the infeed and positioning system, which fixes the board with two positioning hooks. Conveyor belts and upper pressure rollers feed the board precisely into the MULTIMAX 175 M4. Function: Board measurement is performed during cross transport. For correct measurement, the narrow side of the board must face upwards. Automatic measuring provides information on: - Total board width - Position and width of the board edge - Effective usable width - Board length (within allowed grid) By entering an offset, parts of the board edge can be allowed for certain products. 2D Optimization Program: Width: Optimization purely by width according to the cutting list for maximum material yield. Price: Additionally, prices can be stored in the cutting list, and the system optimizes for maximum value. Quantity: Required piece counts are considered, the machine processes orders quickly. Bsdpjyk Icgsfx Af Aewl Based on the stored lengths and widths, the vision system performs complete 2D optimization. All entered data is stored and analyzed, so all cuttings can be checked at any time. The quality function module allows the operator to override the measured board width and define quality zones. The updated optimization is displayed on the touchscreen. Up to four quality levels are possible. However, the quality offset function reduces maximum line performance. Technical Parameters: Feed speed: 50 m/min Max. infeed width: 800 mm Infeed length: 800–4,000 mm Feed platform motor power: 0.75 kW Working height: 870 mm Number of cross chains: 6 Chain length: 2,850 mm Conveyor weight: 1.2 t Weight of visual scan system: 1.8 t Servo power of positioning hooks: 2 × 800 W Horizontal feed speed: 20 m/min Horizontal feed motor power: 0.75 kW Longitudinal feed speed: 10–60 m/min Motor power longitudinal feed: 1.5 kW Infeed system weight: 1.4 t MULTIMAX 175 M4: Function: Optimization software for controlling the movable saw units includes: - Industrial computer with touchscreen - Input of saw lists, display of optimization results, machine status, error messages - Multi-function handheld device for quality marking and width measurement - Laser for width measurement Each handheld control unit operates a freely positionable saw spindle Software opti...

Būklė: naujas, Gamybos metai: 2026, Cutting width 450 mm Operating voltage 400 V Weight 5500 kg WINTER multiple-blade saw with 4 electrically adjustable saws MULTIMAX 175 M4 MULTIMAX 175 M4: Function: Optimization software for controlling the movable saw units includes: - Industrial computer with touchscreen - Entry of cutting lists, display of optimization results, machine status, error messages - Multifunction handheld device for quality marking and width measurement - Laser for width measurement - Each handheld unit controls a freely positionable saw shaft - Software optimizes for yield, value, and productivity Bwedpfx Afoyk H Uns Asl - All production data is stored, monitored, and analyzed Additional features: - Independent control panel (cable length 6 m) - Spray mist lubrication system for the saw shafts - FIX laser (manually adjustable) for displaying saw blade position - Movable laser per saw shaft (synchronized to blade position) - Lasers can already display the next cutting solution while the previous board is still being cut - Infeed system - Automatic “Easy Feed” infeed with powered pressure rollers - Infinitely variable feed speed - Heavy-duty transport chain with hardened guide pins - Hardened prism rails for precise guidance Technical Parameters MULTIMAX 175 M4: - Max. cutting width: 450 mm - Min. cutting width: 45 mm - Max. cutting height without pressure plate: 80 mm - Max. cutting height with pressure plate: 60 mm - Max. feed width: 800 mm - Min. cutting length with pressure plate: 600 mm - Total motor power: 37 kW - Operating voltage: 400 V / 50 Hz - Saw shaft diameter: 65 mm - Shaft speed: 4200 rpm - Saw blade Ø min./max.: 250 / 305 mm - Saw blade bore: 80 mm - 6 carbide-tipped saw blades Ø300 × 3.1 / 2.2 × Z28 - Positioning speed: max. 150 mm/s - Positioning tolerance: ±0.1 mm - Feed speed: 6-60 m/min - Feed motor: 4.0 kW - Chain width: 500 mm - Pressure roller diameter: 110 mm - Max. total outfeed width: 800 mm - Temperature range: 0-40 °C - Extraction hood Ø250 mm - Air speed: 30 m/s - Air volume: 5300 m³/h - Working height: 850 mm - Machine dimensions: 2732 × 2256 × 2003 mm - Net weight: 5500 kg - Color: light grey RAL7035 / anthracite RAL7016 - Cursor travel range: 5 m Configuration: - Transport chain with spikes (every second chain link) - Penetration depth: 0.8 mm (standard) Advantages: - Parallel feed - Stable hold for warped/wide/short boards - Ideal for glue joint cutting - Chain brush at infeed for continuous cleaning - Precision cutting through prism-guided transport chain - Automatic chain lubrication (adjustable via MFD/touchscreen) - Wear-resistant chain return underneath the saw blades Additional equipment: - Powered outfeed roller below (corrugated) + upper pressure roller - Pneumatic control for safe removal of offcuts - High-performance pressure system with 6 spring-mounted rollers - Traveling pressure plate synchronized with saw blade motion - Reliable hold-down over the entire cutting length - Motorized height adjustment of the pressure system with display - Pneumatic suspension of all pressure cylinders - Separate pressure regulation for each element Occupational and operational safety: - 1 set of operating and instruction manuals - CE safety standards - Multiple anti-kickback devices - Swiveling safety hood with lock and standstill monitoring - Emergency stop at infeed, outfeed and control panel - Safety hood with viewing window

Būklė: naudotas, pavaros tipas: kitas, kuro tipas: benzinas, spalva: balta, pirmoji registracija: 02/2019, emisijos klasė: nėra, pakaba: kitas, Gamybos metai: 2019, veikimo valandos: 2 595 h, vairuotojo kabina: kitas, keliamoji galia: 2 500 kg,

Būklė: naujas,

Būklė: labai geros būklės (naudotas), -M4 Soleo -Bendri matmenys (IxPxA): 1730x1526x2480 mm -Naudojamas kepimo plotis: 1370 mm -Naudojamas kepimo gylis: 965 mm -Kepimo paviršius viename aukšte: 1,32 m² -Skardų kiekis viename aukšte: - 4 vnt. 400 x 600 - 4 vnt. 460 x 660 - 3 vnt. 460 x 760 - 2 GN 530 x 650 -Šildymo galia: 30 kW -Prijungta galia: 19 kW -Įtampa: 400 V / 3 PH+N / 50-60 Hz -Svoris: 759 kg Bjdpfx Afswxx Nnj Aewl -Pagaminta: 11/2017

Būklė: naudotas, -M4 Soleo -Bendri matmenys (IxPxA): 1730x1526x2480 mm -Naudojamas kepimo plotis: 1370 mm Bodpfx Aowx I Utsf Aswl -Naudojamas kepimo gylis: 965 mm -Kepimo paviršius viename aukšte: 1,32 m² -Skardų kiekis viename aukšte: - 4 vnt. 400 x 600 - 4 vnt. 460 x 660 - 3 vnt. 460 x 760 - 2 GN 530 x 650 -Šildymo galia: 30 kW -Prijungta galia: 19 kW -Įtampa: 400 V / 3 PH+N / 50-60 Hz -Svoris: 759 kg -Pagaminta: 11/2017

Būklė: geras (naudotas), Thread Cutter, Thread Cutting Machine, Tapping Machine - Integrated reversing gearbox: with quick return - Rated power: 280 watts Bsdpob A N Iiofx Af Aswl - Maximum threading capacity: M8 - Connection: 230 volts - Weight: 2.5 kg

Būklė: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Parduodame savo Datron M8, 2011 metų gamybos. Staklės prijungtos prie elektros tinklo ir iš karto paruoštos darbui! Komplekte – įrankiai, vakuuminė prispaudimo plokštė, pneumatiniai spaustuvai ir programavimo programinė įranga! 10 įrankių keitiklis (daugybė įrankių ir laikiklių) Frezuotuvas HSK25, 50 000 aps./min. Įskaitant programavimo programinę įrangą Primcam 2x pneumatiniai spaustuvai Vakuuminė plokštė su vakuumo pompa Horizontali prispaudimo įranga Bjdpfoyti I Ajx Af Aswl Aušinimas alkoholiu arba oru