Apv 4X 4000 Litrų Talpos Farmacijos Talpyklos, Izoliuota Temperatūra. pirkti naudotą (17 268)

Būklė: labai geros būklės (naudotas), CTS Type: T-40/2000 Air-cooled Temperature Test Chamber Technical Specifications: Cooling Unit: Air-cooled, low-noise, fully hermetic with stepless capacity adjustment via electronic monitoring and control system. Uses environmentally friendly refrigerant R404A. Door: Fully opening door, left-hand hinge, one-handed operation, lockable. Hodsup T Uqspfx Aftefh Rack: Stainless steel, support surface 970 x 980 + 500 mm. Maximum load per rack: 35 kg. Maximum total load with full racking: 100 kg. Test Chamber Illumination: 3x halogen lamps, 20 W, 12 V. Control: 32-bit controller. LCD control panel. Digital display of set and actual values. Numeric input of set values. Plain text error messages. RS 232 interface. Free switching channels for customer-side specimen control. Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Pipe lead-through NW 50 Control Panel Window: 570 x 710 mm Electrical connection, cable length: 5m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 1.5 K/min Heat Emission: Approx. 2500 W at +20°C Approx. 2100 W at 0°C Approx. 1500 W at -20°C Technical data refer to ambient temperature of +25°C, rated voltage 400 V, without test specimen, without heat radiation, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions (internal): Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operational Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain: non-pressurized, R 1/2" internal thread Sound pressure level (measured per DIN EN ISO 3744, 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important information for your safety as the buyer! The following points are carried out on all chambers we offer, prior to sale: 1. Functional check and replacement of necessary components 2. If required, new fill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and information!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Type: VCS 7034-5 Climatic Test Chamber, Water-Cooled Test chamber volume: 335 litres Performance Data for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Rate of change: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance Data for Climatic Testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm 1 port, Ø approx. 50 mm, left side 2 ports, Ø approx. 125 mm, left side 1 port, Ø approx. 125 mm, right side Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 Hfsdoxufypspfx Afteh For your safety as a buyer, please note the following: The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Būklė: labai geros būklės (naudotas), Weiss Type: WT3-1000/40 Weiss Temperature Test Chamber with S!MCON / 32 Control, Water-Cooled Control Panel »Touch Panel« All control and operation commands can be triggered on the control panel »touch panel« by simply touching the function symbols. Leveling Feet To compensate for floor unevenness and to ensure adequate ventilation of the machine component, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with cable ports on the right and left sides. Measuring cables and testing equipment can be routed into the test compartment through these ports. Cable ports included in the standard version: R1: Nominal width 125 mm L1: Nominal width 50 mm Test Chamber Volume: approx. 990 liters Test Chamber Dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External Dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Temperature Test Data: Temperature Range: -40 to +180 °C Temperature Fluctuation over Time at Chamber Center: ± 0.1 to ± 0.5 K Spatial Temperature Deviation: ± 0.5 to ± 1.5 K Temperature Change Rate: Heating: 4.0 K/min Cooling: 3.0 K/min Maximum Heat Compensation: 4500 W Operating Data: Test Chamber Lighting: Halogen bulb 2x 24V, 50W Rated Voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated Current: 22.0 A, Rated Power: 11.5 kW Protection (on-site): 32 A slow-blow fuse Sound Pressure Level: Measured at 1m distance from the front, 1m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Hsdpfxsthhw Ao Aftefh Condition: used Scope of delivery: (See picture) (Technical specifications subject to change and error!) We are happy to answer any further questions you may have by phone.

Būklė: labai geros būklės (naudotas), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, air-cooled Nominal test chamber volume: 280 liters Dimensions: External chamber dimensions: Width 1540 mm x Height 2090 mm x Depth 1240 mm Fan motor and door removed: Width 1540 mm x Height 1940 mm x Depth 925 mm Internal test space: Width 720 mm x Height 690 mm x Depth 560 mm Hjdpfxjqxavae Aftofh Door clear opening: Width 720 mm x Height 690 mm Heated viewing window: Width 500 mm x Height 600 mm Installation footprint of the temperature test chamber with doors open: Width 2340 mm x Height 2090 mm x Depth 2165 mm Feedthrough ports, 2 units on left side panel, Ø 100 mm Temperature range: -70°C to +180°C Heating rate: 3.0 K /min Cooling rate: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Maximum power requirement: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerants: R507 / R23 Buyer information for your safety: The following measures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Modifications and errors in technical data reserved!) For any further questions, we will be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Weiss temperature chamber. Weiss temperature test chamber with S!MCON / 32-controller, air-cooled (Refrigerant converted to R-452A) Control unit: Touch panel All control and operational commands can be executed on the touch panel simply by touching the function icons. Leveling feet To compensate for floor irregularities and ensure adequate ventilation for the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is fitted with access ports on both the right and left sides. These allow measuring cables and test equipment to be routed into the test chamber. Standard ports installed: R1: Nominal width 125 mm L1: Nominal width 50 mm Hfodpfxerak S De Aftjh Test chamber volume: approx. 600 liters External dimensions including hinges and door locks: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door locks: Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Technical data for temperature tests: Temperature range: -42 to +180 °C Temporal temperature deviation at center of useful space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Thermal load compensation max. 2500 W Technical data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Site circuit protection: 16 A slow-blow fuse Sound pressure level approx.: Measured at 1 m distance in front at 1 m height: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as the buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors. All information is subject to confirmation!) If you have further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), CTS Temperature Test Chamber T-55/1000 Li Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS chamber series is composed as follows: For example, Type T -55/1000/Li 1) T stands for: Temperature 2) -55 stands for: lower temperature limit -55 °C 3) 1000 stands for: 1000 liters test chamber volume 4) Li stands for: Special equipment for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text Ethernet interface RS 232 interface Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-luminance LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 Hfsdpsvba Raefx Aftsh 1c Feedthrough 2x Rp 3 1/4'' for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect the performance data. Dimensions: Test chamber volume 1000 liters Internal dimensions Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operational data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation room 10.4 kW Cooling unit: Water-cooled, low-noise, fully hermetic Continuous performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by telephone.

Būklė: labai geros būklės (naudotas), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Performance Data: With a temperature change rate of 25 K/min Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm Temperature range: -72°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 Spatial temperature uniformity: ± 0.5 to ± 2.0 Rate of temperature change (cooling): 25 K/min Rate of temperature change (heating): 25 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test chamber volume: 270 liters 2x side ports ∅ 125 mm 1x side port ∅ 50 mm Hodpfx Afstz Rqmjtefh Chamber is water-cooled Chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerants: R-452A and R-23 Weight: approx. 980 kg Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional checks and replacement of necessary components 2. Refilling with legally approved refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Weiss temperature chamber. Weiss Temperature Chamber with S!MCON / 32-Control, Air-Cooled (Refrigerant converted to R-452A) Test chamber volume: approx. 335 litres Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated current: 12.5 A Rated power: 4.1 kW Required slow-blow fuse: 16 A Sound pressure level: approx. 58 dB(A), measured at 1 m distance from the front at 1 m height Data for temperature testing: Temperature range: -72 to +180 °C Temporal temperature deviation at chamber centre: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Hfsdsq U Sdnspfx Aftoh Refrigerants: R-452A / R-23 Weight: 585 kg Type: WT3-340/70 Important information for your security as a buyer! The following processes are performed on our offered chambers as standard: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and specifications subject to change and errors reserved!) For further questions, we are happy to assist you by telephone.

Būklė: geras (naudotas), CTS Model: T-70/600/S Water-cooled temperature test chamber Refrigerant: Converted to R-452A Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific DUT control Technical Data Hsdpfxevitmde Aftjfh Temperature testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, no heat radiation, and without additional equipment. Dimensions: Test chamber volume: 600 liters Internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, the following information! The following work is carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data, specifications reserved!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Espec Model: TSA-202E-W Temperature Shock Chamber, Water-Cooled Cold Chamber Range: -55°C to 0°C Hot Chamber Range: +50°C to +200°C Hfjdpfxowc R A Ij Aftsh System: Two-zone test via flap switching Temperature Fluctuation: ±0.5°C Hot Chamber: Heat-up time: ambient temperature (20°C) to +200°C within 15 min. Cold Chamber: Cool-down time: ambient temperature (20°C) to -55°C within 35 min. Temperature Recovery: within 5 min. Internal Dimensions (W x H x D mm): 650 x 460 x 670 External Dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power Supply: 400 V AC 50Hz, 65 A Refrigerant: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg Important information for your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data!) We will gladly answer any further questions by phone.

Būklė: labai geros būklės (naudotas), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Hsdpsir D U Dofx Aftofh Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB(A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as a buyer, please note the following information! The following work is performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Newly filled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical details and information!) For any further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of target and actual values - Numerical input of target values - Error messages in plain text - RS 232 interface - Free switching channels for external specimen control Technical Specifications Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Hedpeu U Ixmsfx Aftefh Heating: 2.5 K/min Cooling: 2.5 K/min Heat emission: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Nominal power: 8.8 kW Nominal current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information reserved!) If you have further questions, we will be happy to answer them by phone.

Gamybos metai: 2010, būklė: labai geros būklės (naudotas), Here we offer you a Heraeus Vötsch temperature test chest. Vötsch Temperature Test Chest / Climate Chamber VLM 3068/S Air-Cooled (top-loading construction material test chamber) Control Unit The control unit is mounted on a console on the temperature test chest. All control and operating commands can be triggered by simply touching the function symbols. The operating manual for the control unit is included. Main Switch The main switch is located at the front of the temperature test chest. Air Conditioning Chamber The air conditioning chamber is located inside the test space and contains all assemblies required for temperature regulation. Air is tempered (cooled/heated) in the air handling chamber and circulated by the test chamber fan. Air is drawn in through the middle of the side wall and re-enters the test chamber through air deflectors along the longitudinal sides. Feedthroughs (Optional) The temperature test chest can optionally be equipped with feedthroughs, allowing test leads and measuring devices to be brought into the test chamber. Feedthroughs: front 2 x 82 mm ∅, rear 1 x 85 mm ∅ Internal dimensions: Width 2000 mm, Depth 570 mm, Height 600 mm External dimensions: Width 3000 mm, Depth 870 mm, Height 1060 mm Technical Data: Mechanical load data: Maximum load of test material Test chamber floor (evenly distributed): 600 kg Point load: 50 kg Temperature testing data: Temperature range: -30 °C to +125 °C Temporal temperature deviation (center of usable space): ±1 K Temperature change rate: Heating approx. 1 K/min Cooling approx. 2 K/min Operating data: Nominal voltage: 3/N / PE AC 400 V ±10% 50 Hz Nominal output: 3 kW Nominal current: 9 A Customer-side fuse: 16A slow-blow Temperature Test Chest VLM 3068/S Test chamber volume: approx. 680 l Hfodpfxsrbiyfo Afteh Weight: approx. 700 kg Refrigerant: R-404A Sound level: sound pressure approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Būklė: geras (naudotas), Type: TS -70/1000-10 For sale: CTS Temperature Test Chamber Model: TS -70/1000-10 Hfedpfoxdi Ezex Aftjh Cooling: Water-cooled refrigeration unit, Compressor has been replaced! Features: - Multi-touch control panel - USB and Ethernet interfaces - Feed-throughs for test cables (4 × Ø 125 mm) - Safety temperature limiter Areas of application: - Environmental and endurance testing - Thermal cycling (stress screening) - Quality assurance and R&D - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: Height approx. 1,000 mm, Width approx. 860 mm, Depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, Width approx. 1,270 mm, Depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ±0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note the following! The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and data may be subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32-Control Unit, Water-Cooled (Refrigerant converted to R-452A) Control Panel »Touchpanel« All control and operation commands can be executed simply by touching the function symbols on the control panel “Touchpanel.” Adjustable Feet To compensate for uneven floors and ensure proper ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is fitted with feedthroughs on both the right and left sides, allowing measurement leads and testing equipment to be routed into the test space. Feedthroughs are included as standard equipment: R1: internal diameter 125 mm L1: internal diameter 50 mm Test Chamber Volume: approx. 335 liters Test Chamber Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Testing: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power: 4.1 kW External fuse: 16 A slow-blow Sound pressure level (approx.): Measured at 1m distance from front, 1m height: 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 Important Information for Your Security as a Buyer! The following measures are carried out in advance for all test chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, new filling with refrigerant in accordance with legal requirements 3. Leak test with certificate Hfedpsrbigfsfx Aftjh 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photos) (Technical data subject to change and errors reserved!) For further questions, we are happy to assist you by phone.

Gamybos metai: 2021, būklė: naujas, mašinos/transporto priemonės numeris: MA0134_MAXXI5,5, Exhibition machine: Hfjdpfxehu R Ake Afteh New piston compressor immediately available (plug and play): AIRKO MAXXI 5.5 D - 270 - 10 bar with horizontal 270-liter compressed air tank Year of manufacture: 2021 The compressor has 1 operating hour and is available immediately. 2 cylinders Pressure: 10 bar Rated power: 5.5 kW Free air delivery at 7 bar: 605 l/min Sound level: 80 dB(A) Compressed air outlet: 1/2" Dimensions (L x W x H): 170 x 56 x 134 cm Weight: 181 kg Attractive leasing options available through our in-house bank. Visit our showroom. We always have a wide selection of new and used compressors in stock! Immediately available.

Gamybos metai: 2014, būklė: labai geros būklės (naudotas), 1 unit dry air dryer with material conveyor, single solution, on rollers Manufacturer: SOMOS / Mann + Hummel Including feed device Model: T200 MC2 Year of manufacture: 2014 Hopper capacity: 20 liters Hopper material: Stainless steel Drying air volume: 200 m³/h Drying air temperature: max. 200°C Hsdsiq Ng Rjpfx Aftefh

Gamybos metai: 1996, būklė: naudotas, Tank & Environmental Protection Wozniack – Certified Specialist Company under the German Water Resources Act (WHG) Dear Sir or Madam, We are offering a 100,000-litre double-walled storage tank for diesel storage, equipped with a new diesel pump including data capture system. Nominal capacity: 100 cubic meters Quantity: 1 Used, but fully refurbished. This means the tank has been cleaned, reconditioned, primed and painted. Colour finish: RAL paint as standard; you can also specify your own colour preferences at any time. The system is primed and will be finished painted upon delivery. Material: Steel-in-steel, Material designation S235JRG2 Documentation: Manufacturer’s certificate/test certificate in accordance with DIN 6616 D/2 and type plate. Included accessories: - 1 dipstick - 1 vent connection - 1 filling connection - 1 new overfill prevention device - 1 new leak detection device with leak fluid filled - 1 ladder - 1 suction line Shape: cylindrical storage tank with support feet/console Tank dimensions: approx. 15,750 mm length Diameter: approx. 2,900 mm Weight: approx. 16,000 kg Installation: Above-ground Naturally, you can also customise your tank system! All our systems are thoroughly inspected and tested by selected members of our company. Affordable delivery can be offered on request. Inspections of our systems are possible at any time. Further tanks for both above-ground and underground storage are available in all sizes and for immediate sale on our premises. All our tank systems can also be supplied without a diesel pump. Top offer: Liquid fertiliser – AHL tank systems with capacities from 10,000 to 100,000 litres. Water tanks and firefighting water tanks available. Price / Shipping Hsdpfx Afec Nk A Ustsfh The listed price is ex works Warstein, loaded free on truck. Cost-effective delivery can be offered at an additional charge. Delivery time: immediate You will receive an invoice with VAT stated separately. We also purchase used tanks and, as a certified specialist company under the German Water Resources Act (WHG), can professionally empty, clean, dismantle and transport them away. Kind regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Gamybos metai: 2000, būklė: naudotas, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the German Water Resources Act (WHG) Dear Sir or Madam, We are offering a 30,000-litre storage tank for the storage of water and wastewater as follows. This is a 30 cbm storage tank made of steel (material: S235JRG2 steel). Including manufacturer’s certificate according to DIN and type plate. The tank is internally cleaned and externally coated with bitumen. Suitable for both underground and above-ground installation. Tank dimensions: - Length: approx. 15,750 mm - Diameter: approx. 2,900 mm - Weight: approx. 14,000 kg Shape: cylindrical Equipment: on request If the tank is to be used as a fire water reservoir, a suction line with fixed A-coupling in accordance with DIN can be optionally offered. Hjdpfjc Nkznjx Aftefh You are of course welcome to participate in the design and configuration of your tank system! All our units are thoroughly inspected and checked by selected employees in our company. On request, we also offer cost-effective delivery. An inspection of our equipment is possible at any time. Additional tanks for above-ground and underground installation in all sizes are available for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us. One of our experienced staff will be happy to advise you. General information: All offers apply ex location Warstein, loaded free on truck. Delivery can be offered at a reasonable extra charge. Delivery time: immediately. You will receive an invoice with shown VAT. Additionally, we purchase existing tank systems and, as a WHG-certified specialist company, can professionally empty, clean, dismantle, and transport them away. Best regards from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Gamybos metai: 2022, būklė: naujas, Tank & Environmental Protection Wozniack – Specialist Company Certified under the German Water Resources Act (WHG) Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil. Nominal Capacity: 50 m³, new Paint Finish: RAL 7035 Material: Steel-in-steel design, material grade S235JRG2 Documentation: Manufacturer's certificate / nameplate Included Components: - 1 dipstick - 1 vent nozzle - 1 fill nozzle - 1 new overfill prevention device - 1 new leak monitoring indicator device - 1 ladder - 1 suction line Tank Dimensions: approx. 10,900 mm length Diameter: approx. 2,500 mm Weight: approx. 9,000 kg Installation: Above-ground Delivery time: September Hfodsh Ukulspfx Aftoh Best regards from Warstein Tank and Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Gamybos metai: 1995, būklė: naudotas, mašinos/transporto priemonės numeris: LWT , Tank & Environmental Protection Wozniack Specialist Company in accordance with the Water Resources Act (Wasserhaushaltsgesetz) Dear Sir or Madam, We are offering a 20,000-litre storage tank for water and wastewater storage, as described below. This is a 30 m³ storage tank made of steel. Material: S235JRG2 steel. Including manufacturer’s certificate (DIN) and type plate. The tank is internally cleaned and externally coated with bitumen insulation. Suitable for both underground and above-ground storage. Tank dimensions: Length: approx. 6,400 mm Diameter: approx. 2,000 mm Weight: approx. 4,000 kg Shape: cylindrical Equipment: on request For use as a firewater tank, a suction line with A-type fixed coupling to DIN standards can be offered additionally. Of course, you can also participate in designing your storage facility! All our systems are thoroughly inspected and checked by selected employees in our company. On request, we also offer affordable delivery. Viewing of our systems is possible at any time. Further storage tanks for above-ground and underground storage are available in all sizes and are for sale on our premises. Hfsdpec Nkyvsfx Afteh Have we convinced you with our offer? If you have any questions or requests, simply give us a call. One of our experienced staff members will be happy to advise you. General: All offers are ex location Warstein, loaded free of charge. Delivery can be offered at low cost for an additional charge. Delivery time: immediate You will receive an invoice with VAT shown separately. In addition, we purchase existing storage tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle and transport them away. Best regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Gamybos metai: 1997, būklė: naudotas, mašinos/transporto priemonės numeris: LWT 30, Tank & Environmental Protection Wozniack – Certified Specialist Company According to the Water Resources Act Dear Sir or Madam, We are offering a 30,000-liter storage tank for the storage of water and wastewater as detailed below. This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Incl. manufacturer’s certificate DIN and type plate. The tank is cleaned internally and bitumen-insulated externally. Suitable for both underground and above-ground storage. Tank Dimensions: Length: approx. 9,900 mm Diameter: approx. 2,000 mm Weight: approx. 6,000 kg Shape: cylindrical Fittings: as requested For use as a fire-fighting water tank, we can also offer a suction line with A-storz coupling according to DIN. Of course, you can also customize your tank system with us! All our systems are thoroughly inspected and checked by selected employees in our company. Affordable delivery upon request is available. You are welcome to inspect our tanks at any time. We have additional tanks for both above-ground and underground storage available in all sizes and ready for sale on our premises. Have we convinced you with our offer? Hfedpfxsc Nkyhs Aftsh If you have any questions or requests, just give us a call—one of our experienced staff will be happy to advise you. General Information: All offers are ex-works Warstein, loaded free of charge. Delivery can also be offered at a reasonable surcharge. Delivery time: immediate. You will receive an invoice with VAT shown separately. Furthermore, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), we can professionally empty, clean, dismantle, and remove them. Best regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Gamybos metai: 2001, būklė: naudotas, Tank & Environmental Protection Wozniack – Certified Specialist Company under the Water Resources Act Dear Sir or Madam, We are offering a 13,000-liter double-walled storage tank for diesel storage, as follows: Nominal capacity: 13 cbm Quantity: 1 Used but fully refurbished—that is, the tank has been cleaned, reconditioned, primed, and painted. Color finish in RAL color of your choice; you may also specify your preferred color. Material: Steel-in-steel, material grade S235JRG2 Documentation: Manufacturer’s certificate/test certificate as per DIN 6616 D/2 and type plate Included: - 1 dipstick - 1 vent nozzle - 1 fill nozzle - 1 new overfill prevention device - 1 new leak detector with filled leak detection fluid - 1 ladder - 1 suction line Design: Cylindrical storage tank with feet/consoles Hsdpscmclgofx Aftefh Tank dimensions: Length approx. 6,800 mm plus 500 mm Diesel pump Diameter approx. 1,600 mm Weight approx. 2,800 kg Above-ground installation Compact diesel dispensing system AF 3000 (new), hose length 4 m (longer hoses available upon request) Approved automatic fuel nozzle Pump: 230 Volt, max. 65 L/min Exclusive offer: Liquid fertilizer (AHL) tank systems with capacities from 10,000 to 100,000 liters also available. Of course, you can help design your own tank system! All our systems are thoroughly checked and inspected on-site by selected staff. We also offer affordable delivery upon request. Inspection of our tanks is possible at any time. Further above-ground and underground tank systems in all sizes are available and on display at our premises. Have we convinced you with our offer? Price / Shipping: The price for the fuel station is ex-works Warstein, loaded free of charge. Delivery can be offered at an additional cost. Delivery time: from January 23 You will receive an invoice with VAT shown separately. We also purchase existing tank systems and, as a certified specialist company under the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove them. Best regards from Warstein, Tank & Environmental Protection Wozniack

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 3 500 l, Įranga: dokumentacija / vadovas, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial No.: 1003460 Year of manufacture: 2020 Condition: As new / unused Package: BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / Pressure vessel Working volume: 3,500 litres Total volume: 4,304 litres Jacket volume: 202 litres Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 CE Marking: CE 0036 Design pressure vessel PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Design pressure jacket PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Design temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category III Module G – Individual Inspection Notified body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel underwent full FAT testing and approval at the manufacturer’s site. Inspections performed include: • Pressure test in accordance with PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT as per inspection plan) • Dimensional and drawing check (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration testing of manometers • Verification of markings • Complete documentation review Full FAT protocols available. DESIGN FEATURES • Cylindrical, horizontal tank • Double jacket with half-pipe coil system • Internally electropolished and passivated • Mirror-finish product surface • Pharmaceutical-grade welds • Manway DN 500 • Powder / product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature ports • Agitator port • Heavy-duty trunnion mounts • Lifting lugs DOCUMENTATION – complete and structured Comprehensive, project-related quality and manufacturing documentation, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with inspection report (Module G) • TÜV design assessment and certification • 3.1 material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing reports (RT, PT etc.) • Analysis certificates for welding consumables and shielding gases • Company qualification certificate • Surface roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates • Component conformity and documentation as per EU • Parts list assemblies Hfjdpfxsylng Uj Aftsh • Component drawings • Operation and maintenance manuals Complete digital documentation folder available. CONDITION • Never used in production • Stock item • Interior surface absolutely as-new • No corrosion • No signs of use • Industry-new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURES Premium BRINOX pharmaceutical manufacture with full PED Module G individual approval by TÜV SÜD, CE 0036 marking, and documented FAT testing. Not a standard tank – this is certified project quality with comprehensive GMP-compliant documentation.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 30 000 l, bendras aukštis: 7 200 mm, vidinis skersmuo: 2 500 mm, išorinis skersmuo: 2 900 mm, bendras svoris: 6 000 kg, sienelės storis: 10 mm, sienos konstrukcija: vienos sienos, Kamerų skaičius: 1, liuko skersmuo: 600 mm, slėgis (maks.): 3 juosta, Buffer tank – 30,000 L, vertical, insulated Volume: 30,000 litres Internal diameter: approx. 2,500 mm External diameter (with insulation): approx. 2,900 mm Cylindrical height: approx. 5,520 mm Total height: approx. 7,200 mm Empty weight: 6,000 kg Operating pressure: +3.00 bar Operating temperature: -10 / +900 °C Medium: Water Density: 1,000 kg/m³ Bottom wall thickness: approx. 11 mm Shell / Cylinder wall thickness: approx. 10 mm Material / Specifications Shell material: P265GH / S235JR Insulation: 200 mm mineral wool Shell: smooth aluminium sheet (weatherproof) Mineral wool insulation will be newly fitted; insulation thickness can therefore be freely selected. Equipment Base type: feet Number: 4 Fastening: fixed Top head type: dished end (Klopper head) Hjdpfxexdknkj Aftofh Bottom head type: dished end (Klopper head) Connections: 1 manhole DN 600 with blank cover 7x 1/2'' sockets for temperature sensors 2 lifting lugs on the shell 2 lifting lugs on the top head 2 lifting lugs on the tank feet 1 drain 2'' in the bottom head, routed externally and ending in a 2'' ball valve 1 vent Ø33.7 x 3.6 mm, routed down within the insulation on the side of the tank and ending in the manhole cover cap 1 connection DN 125, flanged externally, internally ending in a 90° bend within the tank centre 1 connection DN 125, flanged externally, internally ending in a 90° bend within the tank centre Documentation: Drawing