Sahinler Mrm-S pirkti naudotą (68 054)

Būklė: naudotas, mašinos/transporto priemonės numeris: 91671500, Gamybos metai: 2023, veikimo valandos: 1 435 h, keliamoji galia: 7 000 kg, Įranga: UVV saugos patikra, Nėra minimalios kainos – garantuojamas pardavimas už aukščiausią pasiūlymą! TECHNINĖS SPECIFIKACIJOS Traukos galia: 7 000 kg Nwsdpfez S Ntgex Akcon ĮRANGO SPECIFIKACIJOS Akumuliatoriaus įtampa: 48 V Akumuliatoriaus talpa: 260 Ah Akumuliatoriaus tipas: ličio jonų akumuliatorius Padangos: baltos, nepaliekančios žymių padangos Apšvietimas: atitinkantis StVZO standartus, su posūkių signalais, skirtas naudoti keliuose Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 1 850 x 1 000 x 1 400 mm Svoris: 1 500 kg Techninis aptarnavimas galioja iki: 2027-07 UVV (darbo saugos standartas) galioja iki: 2027-07 Veikimo valandos: 1 435 val. ĮRANGA Akumuliatoriaus įkroviklis Anksčiau priklausė „Jungheinrich“ įmonės pilno aptarnavimo įrangos parkui Visi matmenys yra apytiksliai. Už rašymo ir matavimo klaidas atsakomybė nenešama. Atėmimo sąlygos: Šoninis pakrovimas iki 6 t galimas naudojant didelį šakinis krautuvą. Pakrovimas vykdomas kliento rizika. Pakrovimas iš galinės pusės per rampą, jei sunkvežimio aukštis yra 100–150 cm, galima iki 15 t ir iki 230 cm pločio. Įrangą galima atsiimti tik gavus apmokėjimo patvirtinimą el. paštu. Įrangą galima atsiimti be išankstinio pranešimo nuo pirmadienio iki penktadienio, nuo 07:00 iki 16:00. Jei įranga neatsiimama laiku, už kiekvieną įrangos vienetą ir dieną skaičiuojamas 20 € saugojimo mokestis. Prieš atsiimant įrangą, visi saugojimo mokesčiai turi būti sumokėti. Partijos numeris: 357

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Max. bending capacity - mild steel: 7 mm Max. plate thickness (without pre-bending) at D = 5x upper roll: 7 mm Max. plate thickness (without pre-bending) at D = 1.5x upper roll: 4.5 mm Max. plate thickness (with pre-bending) at D = 5x upper roll: 4.5 mm Max. plate thickness (with pre-bending) at D = 1.5x upper roll: 3.5 mm Upper roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rolls Upper roll drive via hydraulic motor and planetary gearbox, lower roll drive via gearwheel and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of upper roll Hydraulic drop-end 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations Nwedpfx Aoyb Szhokcsn OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity – structural steel: 9 mm Max. sheet thickness without pre-bending at D=5x upper roll: 8 mm Max. sheet thickness without pre-bending at D=1.5x upper roll: 7 mm Max. sheet thickness with pre-bending at D=5x upper roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 245 mm Lower roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rolls Upper roll drive via hydromotor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Nwjdpsyb Sz Isfx Akcsn Cone bending device Hydraulic release of upper roll Hydraulic drop-end 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity - mild steel: 10 mm Max. plate thickness without pre-bending at D = 5x top roll: 10 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 8 mm Max. plate thickness with pre-bending at D = 5x top roll: 8 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 200 - 220 mm Bottom roll diameter: 200 - 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Nwedpfjynmyfex Akcjn Motor output: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2550 mm Max. bending capacity – structural steel: 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Lower roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4900 mm Width: 1150 mm Height: 1250 mm Weight: 4600 kg 4 rolls Top roll driven by hydromotor and planetary gear, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Nsdpjyb Sywofx Akcjwn Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic upper roll unloading Hydraulic swing-out bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2050 mm Max. bending capacity – structural steel: 11 mm Max. sheet thickness without pre-bending at D=5× top roll: 11 mm Max. sheet thickness without pre-bending at D=1.5× top roll: 9 mm Nwodpfoyb Szuex Akcon Max. sheet thickness with pre-bending at D=5× top roll: 9 mm Max. sheet thickness with pre-bending at D=1.5× top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 4080 kg 4 rolls Top roll powered by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Nwjdpfxsynmx Io Akcsn Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roll: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 220 mm Lower roll diameter: 200 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll unloading Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, bottom roll drive via gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end 2 working speeds Overload protection Movable control console Equipment compliant with CE regulations Nodpfxeynm D Rj Akcjwn OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2050 mm Maximum bending capacity (mild steel): 16 mm Max. plate thickness without pre-bending at D = 5x top roll: 16 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 13 mm Max. plate thickness with pre-bending at D = 5x top rolls: 13 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1550 mm Weight: 6100 kg Four rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing Two working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL ROLLING: - Maximum plate thickness for conical rolling is 50% of rated capacity Nwsdeynm Ehspfx Akcsn - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2,550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Njdoyb Sykopfx Akcown Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,170 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum sheet thickness is 50% of the nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity - mild steel: 13 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Lower roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gearwheel and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Continuously variable rolling speed Hydraulic side support Hydraulic top support NC control Njdpfx Asyb Sydokcswn IMPORTANT POINTS FOR CONICAL BENDING: Maximum sheet thickness is 50% of rated capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Nwodjyb Sy Rspfx Akcon Max. bending capacity - structural steel: 13 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital readout for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONE BENDING: The max. sheet thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Lead time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness (without pre-bending at D=5x top roll): 6 mm Max. plate thickness (without pre-bending at D=1.5x top roll): 4 mm Max. plate thickness (with pre-bending at D=5x top roll): 4 mm Max. plate thickness (with pre-bending at D=1.5x top roll): 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4250 mm Width: 960 mm Height: 1100 mm Weight: 2800 kg 4 rollers Top roll driven by hydraulic motor and planetary gear, bottom roll driven by gear and cardan shaft Hydraulic adjustment for bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Nwodpfx Akoyb Szbjcsn Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum plate thickness is 50% of nominal capacity Conical length must be max. 30% or exceed 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without prebending at D = 5x top roll: 9 mm Max. sheet thickness without prebending at D = 1.5x top roll: 7 mm Max. sheet thickness with prebending at D = 5x top roll: 7 mm Max. sheet thickness with prebending at D = 1.5x top roll: 5 mm Top roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE standard OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: Nedpfx Aoynmzpokcown The max. sheet thickness is 50% of rated capacity The cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Nwsdpfeynmylsx Akcon Leasing rate: €1,383.48 Bending length: 2050 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending at D = 5x top roll: 20 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 16 mm Max. plate thickness with pre-bending at D = 5x top roll: 16 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 12 mm Top roll diameter: 280 mm Bottom roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief for the top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS (PRICES ON REQUEST): Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2,550 mm Max. bending capacity - mild steel: 25 mm Max. sheet thickness without pre-bending at D = 5x top roll: 25 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 16 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,500 mm Width: 2,000 mm Height: 1,900 mm Weight: 13,000 kg Nwjdpeynm Euefx Akcjn 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment for bottom and side rolls Digital readout for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – carbon steel: 20 mm Max. plate thickness without pre-bending at D=5x top roll: 20 mm Max. plate thickness without pre-bending at D=1.5x top roll: 16 mm Max. plate thickness with pre-bending at D=5x top roll: 16 mm Max. plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Device for conical bending Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Nwedpfx Asynm Ebskcen Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONE ROLLING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Leasing rate: €1,840.86 Bending length: 2050 mm Max. bending capacity - mild steel: 30 mm Max. plate thickness without prebending at D = 5x upper roll: 30 mm Max. plate thickness without prebending at D = 1.5x upper roll: 25 mm Max. plate thickness with prebending at D = 5x upper roll: 25 mm Max. plate thickness with prebending at D = 1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5 - 5 m/min Motor power: 22 kW Length: 5000 mm Width: 2000 mm Height: 1900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower roll Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Nwsdpfxoynm Eno Akcsn IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 14–16 weeks from order Country of origin: Turkey Price: €48,000 Leasing rate: €916.80 Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Max. flanging radius: 70 mm Max. blank diameter: 4,000 mm Min. blank diameter: 550 mm Motor: 8.75 kW Length: 4,250 mm Width: 720 mm Height: 2,000 mm Weight: 2,015 kg Simple operation via mobile control panel with push buttons Manufactured in accordance with EC safety guidelines and CE marking One set of flanging rolls included (radius of your choice) Min. diameter when cutting: 600 mm (with adapter for small diameters: 400 mm) Min. diameter when flanging: 550 mm (with adapter for small diameters: 350 mm) Includes one set of cutting knives Rotational speed: 70 rpm, with adjustable max. torque Upper and lower flanging roll drives via planetary gearbox Hydraulic adjustment for processing flat and dished parts Nwodpfx Aeyq Spwekcon Cutting and flanging performed with the same head Optional features such as fixed or adjustable cone holders, adapters for small diameters, cutting wheels for stainless steel or higher speeds available on request.

Būklė: geras (naudotas), Gamybos metai: 2015, Spaudimo jėga: 60,0 t Šlyties skerspjūvis (mm²): 28 (15 mm), 38 (11 mm) Kvadratinis plienas: 35 x 35 mm Kampuotasis plienas: 120 x 120 x 12 mm Apvalus plienas: 40,0 mm Plokščiasis plienas: 200 x 20 / 300 x 15 mm Peilio ilgis: 317 mm Išsikišimas: 220 mm Darbinis aukštis: 940 / 1140 mm Eigų skaičius per minutę (maks.): 26 Darbinis eigos ilgis (maks.): 55,0 mm Alyvos talpa: 23,0 l Nwsde Aa A Ifjpfx Akcen Bendroji galios sąnauda: 4,0 kW Mašinos svoris: apie 1440 kg Matmenys (aukštis x plotis x gylis): 1510 x 590 x 1570 mm Iš techninės priežiūros dirbtuvės Naujos bazinės mašinos kaina: ~ 14 000 eurų Speciali kaina – pagal užklausą Įranga: - tvirta elektrohidraulinė profiliuoto plieno žirklė - štampavimo stotis, plokščiojo plieno žirklė, - kampinės / profiliuoto plieno žirklė, išpjovimo stotis - tvirta ir stabili suvirinta konstrukcija - bepakopė eigos reguliavimas - labai kompaktiškas dizainas - atraminis stalas prie išpjovimo ir skyliavimo stoties - šoninės atraminės plokštumos - centrinė tepimo sistema - 1 valdomas įrenginys, judantis laisvai - avarinis išjungimo mygtukas - naudojimo instrukcija (PDF)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, tiesinimo volelių skaičius: 2, maks. lakšto storis: 2 mm, peilių skaičius: 6, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, bendras plotis: 1 700 mm, bendras ilgis: 2 300 mm, bendras aukštis: 1 800 mm, gaminio plotis (maks.): 1 250 mm, padavimo velenėlių skaičius: 2, YF-S modelio elektrinė mašina, skirta išilgai ir skersai pjauti ritinius, kurių plotis – 1250 mm. Nwedpfx Akj Afgzmjcen

Būklė: naujas, Sheet thickness: 6 Nwodpfx Akjflvl Ajcjn Bending length: 2550 Top roll diameter: 190 Pre-bending: 5 Sheet length: 2550 Model: MRM-S 3-Roll Motorized Asymmetric Plate Rolling Machine Steel-welded frame – Motorized adjustment of the rear roll Options: Hardened rolls: €1,800 Extended roll shafts: €500 Section rolls: €750 Digital display: €800 All prices excl. VAT.

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 14–16 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 81 500 € Lizingo įmoka: 1 540,35 € Maks. lakšto storis – statybinis plienas: 8 mm Maks. lakšto storis – nerūdijantis plienas: 5 mm Maks. užlenkimo spindulys: 80 mm Min. užlenkimo spindulys: 10 mm Maks. dugno skersmuo: 4 500 mm Min. dugno skersmuo: 720 mm Maks. užlenkimo aukštis: 95 (R 80) / 35 (R 25) mm Nwodpfjyq Svkox Akcsn Variklis: 11 kW Ilgis: 4 900 mm Plotis: 1 700 mm Aukštis: 2 700 mm Svoris: 4 550 kg Įskaitant užlenkimo volus statybiniam plienui (R25) Įskaitant pjovimo peilį Viena greitis (70 aps./min.) su maksimalios sukimo momento nustatymo galimybe Viršutinio ir apatinio volų pavara su nepriklausomais hidrauliniais varikliais ir planetiniais reduktoriais Galima apdoroti tiek plokščius, tiek išgaubtus dugnus Hidrauliškai reguliuojamas dugno aukštis Pjovimo ir užlenkimo procesas toje pačioje galvoje Šoniniai atraminiai volai Valdymas per jutiklinį ekraną Pasirinkimai, tokie kaip fiksuotas arba reguliuojamas kūginis laikiklis, adapteriai mažiems skersmenims, pjovimo diskai nerūdijančiam plienui arba didesnis greitis... Pagal užklausą.

Būklė: naudotas, Gamybos metai: 2006, 1 naudota dirbtuvės presas Gamintojas: Sahinler Modelis: AP 150-1500 Darbinis plotis: 1500 mm Presavimo jėga: 150 tonų Stalo matmenys: 1550 x 530 mm Ilgis (kairė – dešinė): 2630 mm Gylis (priekis – galas): 1000 mm Aukštis: 2625 mm Svoris: 3 tonos Nwedo Afanaspfx Akcon Komplektuojamas su įvairiais lenkimo įrankiais.

Būklė: naudotas, mašinos/transporto priemonės numeris: 91671431, Gamybos metai: 2022, veikimo valandos: 423 h, keliamoji galia: 7 000 kg, tuščias svoris: 1 500 kg, Įranga: UVV saugos patikra, Nėra minimalios kainos – garantuotas pardavimas už didžiausią kainą! TECHNINĖS CHARAKTERISTIKOS Traukos jėga: 7 000 kg MAŠINOS CHARAKTERISTIKOS Baterijos įtampa: 48 V Baterijos talpa: 375 Ah Baterijos tipas: 3 PzS Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 1 850 x 1 000 x 2 200 mm Svoris: 1 500 kg Techninė priežiūra galioja iki: 2027-09 Darbo saugos patikra galioja iki: 2027-09 Veikimo valandos: 423 val. ĮRANGA Kabina Stiklų valytuvas Baltos, nepaliekančios žymių padangos StVZO apšvietimas su posūkių rodikliais, skirtas naudoti keliuose Apsauginis žibintas priekyje Anksčiau priklausė „Jungheinrich“ pilno aptarnavimo įrangai Visi matmenys yra apytiksliai. Už rašybos ir matavimo klaidas atsakomybė neprisiimama. Atėmimo sąlygos: Šoninis pakrovimas iki 6 tonų galimas naudojant didelį krautuvą vietoje. Pakrovimas atliekamas kliento atsakomybe. Pakrovimas iš galo per rampą, kai sunkvežimio aukštis yra 100–150 cm, galima iki 15 tonų ir iki 230 cm pločio. Atėmimas galimas tik gavus mokėjimo patvirtinimą el. paštu. Atėmimas be išankstinio pranešimo nuo pirmadienio iki penktadienio nuo 7:00 iki 16:00 val. Jei atėmimas atliekamas ne laiku, taikomas sandėliavimo mokestis – 20 € už mašiną per dieną. Prieš atėmimą visi sandėliavimo mokesčiai turi būti visiškai apmokėti. Nwodpfxoz S Nvzs Akcon Partijos numeris: 388