Reha Makina H Type Deep Drawing pirkti naudotą (78 683)

Būklė: naudotas, Single-column hydraulic press with drawing cushion RÖCHER Type REP 100.01 SZ Hydraulic drawing press Machine no. 15,499 Year of manufacture: 2003 Press force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table area: 850 x 700 mm with drop-through hole Ø 150 mm Ram area: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec Table height above floor: 910 mm Hydraulic operating pressure max. 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec Press speed up to 23.8 tons (238 kN): 5 to 68 mm/sec Press speed up to 100 tons (1000 kN): 5 to 16 mm/sec Return speed: 50 to 400 mm/sec Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC - Ram stroke and press force programmable via control system - Drawing cushion with drawing and ejector function Pjdpfx Aoyupulef Uepr - Drawing cushion force infinitely adjustable - Ram and drawing cushion equipped with direct travel measuring system - Drawing cushion can be extended and retracted under the press area, suitable for punching applications using the drop-through hole - Floor-level installation, drawing cushion does not go below ground level - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table area with holes for drawing cushion ram rods - Ram with ejector - Stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and button on control panel - LEUZE light barrier as reach-in protection for safe operation - Front mirror columns at the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool tempering or cooling at the ram - Piece counter in the control system - 306 recorded operating hours - Operating manual, hydraulic diagram and electrical diagram available Space requirement for press L x W x H: 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good, as-new condition

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 40 kW (54,38 AG), kuro tipas: hibridas, spalva: kitas, Gamybos metai: 2026, Įranga: borto kompiuteris, hidraulika, kabina, CONSTMACH DRYMIX 60 vollautomatische Trockenbetonmischanlage zeichnet sich durch ihr spezielles Design ohne Mischer aus. Die Betonzusätze werden über präzise Wiegesysteme direkt an Fahrmischer übergeben, ohne dass ein Mischprozess stattfindet. Diese Eigenschaft bietet einen erheblichen Vorteil bei Projekten, bei denen der Beton über weite Strecken vom Produktionsort transportiert werden muss. Die DRYMIX 60 ist eine ideale Lösung für langfristige Projekte und bietet sowohl eine leistungsstarke Produktionskapazität als auch einen geringen Wartungsaufwand. Die Anlage ist kompatibel mit Zementsilos unterschiedlicher Größen von 50 bis 500 Tonnen, je nach Projekt- und Baustellenanforderungen. Bei der Verwendung von Sackzement wird dieser dank integriertem Entleerungstrichter und Silo-Befüllsystem einfach in die Zementsilos gefördert. Darüber hinaus kann die Anlage je nach klimatischen Bedingungen des Einsatzortes mit speziellen Heiz- oder Kühlsystemen ausgestattet werden. In kalten Regionen ist das System mit Dampferzeugern und isolierten Paneelen ausgestattet, während bei heißen Umgebungen Kühlanlagen den Beton auf die gewünschte Temperatur bringen. Aggregate-Vorbeschickungssysteme machen eine Zufahrrampe überflüssig und erleichtern so die Installation. Bei begrenztem Platzangebot auf der Baustelle kann der Zuschlagstofftransfer alternativ zum Förderband auch über ein Becherwerk erfolgen. Die DRYMIX 60 ist mit hochwertigen elektronischen Komponenten der Marken SIEMENS und SCHNEIDER ausgestattet und steuert den gesamten Produktionsprozess sicher und effizient über ein anwenderfreundliches, SPS-basiertes Automatisierungssystem. DryMix-60 Trockenbetonmischanlage Technische Daten: Produktionskapazität: 60 m³/h Gewicht: 27 Tonnen (ohne Zementsilo) Gesamtmotorleistung: 55 kW Erforderliche Generatorleistung: 80 kVA Ppsdpfx Afsxp U Sdo Uer Benötigte Stellfläche: 200 m² Aggregatvorratbunker: 4 x 15 m³ Aggregat-Wiegebunker: 1,5 m³ Aggregat-Wiegeband: 600 x 9.700 mm Zement-Wiegebunker: 600 kg Wasser-Wiegebunker: 300 l Zusatzmittel-Wiegebunker: 30 l Luftkompressor: 300 l, 4 kW Zementsilo: Wahlweise 50–500 Tonnen Kapazität Steuersystem: Vollautomatisch Warum sollten Sie sich für die DRYMIX 60 | Trockenbetonmischanlage entscheiden? Die CONSTMACH DRYMIX 60 ist innerhalb der Branche ein Modell, das durch Effizienz und Langlebigkeit besticht. Dank ihres modularen Designs gewährleistet sie eine unkomplizierte Installation und einfache Transportfähigkeit, während das automatische Kontrollsystem höchste Präzision im Produktionsprozess bietet. Energieeffiziente Motoren und qualitativ hochwertige Ausrüstung sichern einen langfristigen Einsatz. Wenn Sie in Ihren Projekten Zeit, Personal und Kosten sparen möchten, ist die mit CONSTMACH-Qualitätsgarantie gefertigte DRYMIX 60 die richtige Wahl. Was bietet Constmach? Constmach ist ein führender Maschinenhersteller für die Bau- und Bergbauindustrie mit einem breiten Produktportfolio. Zu unserem Sortiment zählen Betonblockmaschinen, stationäre und mobile Betonmischanlagen, Brechanlagen, Sieb- und Brechanlagen, Sandwaschmaschinen, Sandherstellungsmaschinen, Asphaltmischanlagen, Förderbandsysteme, Backenbrecher und mobile Brechanlagen. Durch höchste Qualitätsstandards, innovative Produktionsmethoden sowie kundenorientierte Lösungen ist Constmach eine zuverlässige Marke sowohl auf nationalen als auch internationalen Märkten. Dank ihrer Robustheit, Effizienz und langlebigen Leistung werden unsere Produkte von Branchenprofis weltweit bevorz

Būklė: geras (naudotas), Gamybos metai: 1995, galia: 22 kW (29,91 AG), spaudimo jėga: 120 t, eigos ilgis: 400 mm, stalo plotis: 1 250 mm, stalo ilgis: 1 000 mm, stalo aukštis: 950 mm, atitraukimo jėga: 5 t, bendras ilgis: 2 100 mm, bendras plotis: 2 050 mm, bendras aukštis: 3 800 mm, valdymo spintos aukštis: 1 900 mm, valdymo spintos ilgis: 600 mm, valdymo spintos plotis: 500 mm, įrengimo aukštis: 900 mm, Įranga: apsaugos šviesos užtvara, Hidraulinė giluminio tempimo presas, spaudimo jėga 120 t, eiga 400 mm, įrengimo aukštis 900 mm, su alyvos aušintuvu, šviesos užtvara, matmenys 2100x2050x3800 mm, apie 13400 kg Ppjdpfx Afoycin Ue Usr

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), A large-format vacuum thermoforming machine by Geiss is available. Sheet size (minimum): 1100mm/1300mm; maximum sheet size: 2100mm/1800mm; maximum forming depth: 620mm. Additional sheet size 1: minimum 850mm/750mm, maximum 1850mm/1250mm. Additional sheet size 2: minimum 1050mm/800mm, maximum 2050mm/1300mm. Includes a separate loading machine with pneumatic sheet separation equipment, an automatic aligner for sheet positioning in both longitudinal and transverse directions, a pneumatic pusher for removing formed parts from the loading unit, fully automatic central lubrication for the loading machine, multiple interchangeable pallets for window sheet sets, a storage rack for window sheets, a vacuum control system with four independently adjustable flow stages, and an air preparation system. Documentation is available. On-site inspection is possible. Psdpfowih Arsx Af Ujpr

Gamybos metai: 2021, būklė: paruoštas naudoti (naudotas), Pusiau automatinė vakuuminė skin tipo pakavimo mašina (padėklų užlydymo įrenginys) Sealed Air, skirta Darfresh skin pakavimui, yra prieinama. Pakavimo našumas: 15 vnt/min, ciklo našumas: 1,5 ciklo/min, plėvelės plotis: 562 mm, didžiausi gaminio matmenys X/Y/Z: 670 mm/470 mm/50 mm, padėklo ilgis: 135 mm-700 mm, padėklo plotis: 120 mm-520 mm, padėklo aukštis: 5 mm-50 mm. Mašinos matmenys X/Y/Z: apie 1050 mm/1650 mm/1250 mm, svoris: apie 500 kg. Yra dokumentacija. Galima apžiūra vietoje. Psdpjxaphbofx Af Ujpr

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Siūloma CFS termoformavimo vakuuminio pakavimo mašina / giluminio tempimo pakavimo mašina. Suslėgtas oras: 8 bar / 500Nl/min, vanduo: 2 bar / 75l/min, svoris apie 2800 kg. Apžiūra galima pagal susitarimą. Ppsdpfexx Ud Ejx Af Uer

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 40 kW (54,38 AG), spalva: kitas, Gamybos metai: 2026, Įranga: kabina, CONSTMACH DRYMIX 60 vollautomatische Trockenbetonmischanlage zeichnet sich durch ihr spezielles Design ohne Mischer aus. Die Betonzusätze werden über präzise Wiegesysteme direkt an Fahrmischer übergeben, ohne dass ein Mischprozess stattfindet. Diese Eigenschaft bietet einen erheblichen Vorteil bei Projekten, bei denen der Beton über weite Strecken vom Produktionsort transportiert werden muss. Die DRYMIX 60 ist eine ideale Lösung für langfristige Projekte und bietet sowohl eine leistungsstarke Produktionskapazität als auch einen geringen Wartungsaufwand. Ppedpfjxphpcjx Af Uer Die Anlage ist kompatibel mit Zementsilos unterschiedlicher Größen von 50 bis 500 Tonnen, je nach Projekt- und Baustellenanforderungen. Bei der Verwendung von Sackzement wird dieser dank integriertem Entleerungstrichter und Silo-Befüllsystem einfach in die Zementsilos gefördert. Darüber hinaus kann die Anlage je nach klimatischen Bedingungen des Einsatzortes mit speziellen Heiz- oder Kühlsystemen ausgestattet werden. In kalten Regionen ist das System mit Dampferzeugern und isolierten Paneelen ausgestattet, während bei heißen Umgebungen Kühlanlagen den Beton auf die gewünschte Temperatur bringen. Aggregate-Vorbeschickungssysteme machen eine Zufahrrampe überflüssig und erleichtern so die Installation. Bei begrenztem Platzangebot auf der Baustelle kann der Zuschlagstofftransfer alternativ zum Förderband auch über ein Becherwerk erfolgen. Die DRYMIX 60 ist mit hochwertigen elektronischen Komponenten der Marken SIEMENS und SCHNEIDER ausgestattet und steuert den gesamten Produktionsprozess sicher und effizient über ein anwenderfreundliches, SPS-basiertes Automatisierungssystem. DryMix-60 Trockenbetonmischanlage Technische Daten: Produktionskapazität: 60 m³/h Gewicht: 27 Tonnen (ohne Zementsilo) Gesamtmotorleistung: 55 kW Erforderliche Generatorleistung: 80 kVA Benötigte Stellfläche: 200 m² Aggregatvorratbunker: 4 x 15 m³ Aggregat-Wiegebunker: 1,5 m³ Aggregat-Wiegeband: 600 x 9.700 mm Zement-Wiegebunker: 600 kg Wasser-Wiegebunker: 300 l Zusatzmittel-Wiegebunker: 30 l Luftkompressor: 300 l, 4 kW Zementsilo: Wahlweise 50–500 Tonnen Kapazität Steuersystem: Vollautomatisch Warum sollten Sie sich für die DRYMIX 60 | Trockenbetonmischanlage entscheiden? Die CONSTMACH DRYMIX 60 ist innerhalb der Branche ein Modell, das durch Effizienz und Langlebigkeit besticht. Dank ihres modularen Designs gewährleistet sie eine unkomplizierte Installation und einfache Transportfähigkeit, während das automatische Kontrollsystem höchste Präzision im Produktionsprozess bietet. Energieeffiziente Motoren und qualitativ hochwertige Ausrüstung sichern einen langfristigen Einsatz. Wenn Sie in Ihren Projekten Zeit, Personal und Kosten sparen möchten, ist die mit CONSTMACH-Qualitätsgarantie gefertigte DRYMIX 60 die richtige Wahl. Was bietet Constmach? Constmach ist ein führender Maschinenhersteller für die Bau- und Bergbauindustrie mit einem breiten Produktportfolio. Zu unserem Sortiment zählen Betonblockmaschinen, stationäre und mobile Betonmischanlagen, Brechanlagen, Sieb- und Brechanlagen, Sandwaschmaschinen, Sandherstellungsmaschinen, Asphaltmischanlagen, Förderbandsysteme, Backenbrecher und mobile Brechanlagen. Durch höchste Qualitätsstandards, innovative Produktionsmethoden sowie kundenorientierte Lösungen ist Constmach eine zuverlässige Marke sowohl auf nationalen als auch internationalen Märkten. Dank ihrer Robustheit, Effizienz und langlebigen Leistung werden unsere Produkte von Branchenprofis weltweit bevorz

Gamybos metai: 1999, būklė: naudotas, Technical Details: Pressing area: 2350 x 1300 mm Dimensions (LxWxH) approx.: 4200 x 3200 x 2400 mm Weight approx.: 8000 kg Ppedpjf D Aq Asfx Af Ujr Product Description: Machine number 99-0211, equipped with a sliding table 2350 x 1300 mm, maximum workpiece dimensions 2100 x 1100 mm, maximum workpiece thickness 38 mm, control via touchscreen.

Gamybos metai: 1985, būklė: dilaminuotas dirbtuvėje (naudotas), REFORM type AR 10 model 40H Surface Grinding Machine Year of manufacture: 1985 30 kW grinding motor Control system: Modicon 6-stage magnetic control Magnet size: 1000 x 300 mm Pjdjd E Np Eepfx Af Uopr Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pcs Grinding motor feed: Infinitely adjustable from 0.01 mm to 0.1 mm Hydraulic oscillation drive New supply cables between machine and control cabinet

Gamybos metai: 1981, būklė: beveik kaip naujas (naudotas), Used hydraulic (triple-acting) deep drawing press LAUFFER 400t. The press has already been dismantled and is in excellent condition due to minimal use. Technical specifications: Year of manufacture: 1981 Pressing force in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Table dimensions (LxW) in mm: 1600 x 1300 Ram dimensions (LxW) in mm: 1500 x 1300 Installation space in mm: 850 Upper ejector stroke in mm: 160 Upper ejector force in t: 6.3 Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power in kW: 150 Overall dimensions (LxWxH) in mm: 3550 x 1200 x 5940 Total weight in kg: 50,000 Ppedped Ntd Dsfx Af Uor

Būklė: naujas, Gamybos metai: 2026, spaudimo jėga: 200 t, eigos ilgis: 60 mm, stalo plotis: 400 mm, stalo ilgis: 4 200 mm, eigos reguliavimas: 60 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Mūsų presai ir padavimo linijos, sukurtos durų bei langų furnitūros sektoriui ir galinčios veikti tiek dvigubai, tiek viengubai, užtikrina maksimalų našumą ilgus metus. Langų furnitūros sektoriuje, kurioje itin svarbi didelė gamybos apimtis, mūsų presai ir šioje srityje sukaupta patirtis leidžia užtikrinti aukščiausią klientų pasitenkinimą. -Spaudimo jėga iki 400 tonų -Stalo ilgis iki 6000 mm -2 arba 3 svirčių pasirinkimas -Automatinė cirkuliacinė smulkioji alyvos lubrikacija -Progresyvinio tepimo blokas -Prieiga prie preso iš galo ir priekio -Slidžios durelės su magnetiniais davikliais -Indukciškai grūdinti ir šlifuoti krumpliaračiai -Kūginiu užraktu tvirtinamos krumpliaračių ir stebulių jungtys PRESAS: 200 TONŲ APSUKOS: 40–70 APS./MIN. EIGA: 60 MM MAKS. FORMOS AUKŠTIS: 340MM Pjdoxrbmyspfx Af Uopr STALO–KUMŠTUKO AUKŠTIS: 400MM REGULIAVIMO DIAPAZONAS: 100MM VIRŠUTINIO STALO IŠMATAVIMAI: 400X3000MM APATINIO STALO IŠMATAVIMAI: 400X4200MM VARIKLIS: 18,5 KW VARIKLIO APSUKOS: 3000 APS./MIN.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 400 t, eigos ilgis: 60 mm, stalo plotis: 400 mm, stalo ilgis: 4 500 mm, eigos reguliavimas: 100 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Šie mūsų presai ir padavimo linijos, specialiai sukurti durų ir langų aksesuarų pramonei ir turintys tiek viengubą, tiek dvigubą darbo režimą, užtikrina maksimalų našumą ir ilgalaikį patikimą veikimą. Langų aksesuarų sektoriuje, kur neišvengiama masinė gamyba, mūsų presai ir sukaupta patirtis garantuoja aukščiausią klientų pasitenkinimą. - Presavimo jėga iki 400 tonų - Stalo ilgis iki 6000 mm - 2 arba 3 jungiamųjų strypų pasirinkimas - Automatinis nuolatinio grįžtamojo plono tepimo mechanizmas - Progresyvaus tepimo blokas - Prieiga prie preso iš priekio ir galo - Magnetiniais jutikliais valdomi stumdomieji dangčiai - Indukciškai grūdinti ir šlifuoti krumpliaračiai - Kūginėmis fiksavimo jungtimis tvirtinami krumpliaračiai ir stebulės PRESAVIMO JĖGA: 400 TONŲ APSISUKIMAI: 40-70 aps./min EIGA: 60 MM MAKSIMALI FORMOS AUKŠTIS: 340 MM STALO-PRIEKINIO BLOKO AUKŠTIS: 400 MM REGULIAVIMAS: 100 MM VIRŠUTINIO STALO MATMENYS: 500x4500 MM APATINIO STALO MATMENYS: 400x4500 MM VARIKLIS: 30 KW Pedoxrbpnopfx Af Uspr VARIKLIO APSUKOS: 3000 aps./min

Būklė: naujas, Gamybos metai: 2026, spaudimo jėga: 300 t, eigos ilgis: 60 mm, stalo plotis: 400 mm, stalo ilgis: 4 200 mm, eigos reguliavimas: 100 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Šios mūsų presai ir padavimo linijos, skirtos durų bei langų aksesuarų pramonei ir pasižyminčios dvigubu bei viengubu darbo režimu, užtikrina maksimalų našumą bei ilgalaikį darbą. Langų aksesuarų sektoriuje, kur masinė gamyba yra neišvengiama, mūsų presai ir sukaupta patirtis garantuoja didžiausią klientų pasitenkinimą. -Slėgio jėga iki 400 tonų -Stalo ilgis iki 6000 mm -2 arba 3 švaistiklių pasirinkimas Ppjdpfx Afoxrbn Ro Uor -Automatinis nuolatinis plonas tepimas -Progresyvinio tepimo blokas -Prieiga prie preso iš galinės ir priekinės pusės -Slidžios durelės su magnetiniais jutikliais -Indukciškai grūdinti ir šlifuoti krumpliaračiai -Pleištiniu užraktu atliekami krumpliaračio ir stebulės sujungimai PRESAVIMAS: 300 TONŲ APSUKOS: 40-70 APS./MIN. STŪMOKLIO EIGA: 60 MM MAKS. FORMOS AUKŠTIS: 340 MM STALO – STŪMOKLIO AUKŠTIS: 400 MM REGULIAVIMAS: 100 MM VIRŠUTINIO STALO MATMENYS: 400X3000 MM APATINIO STALO MATMENYS: 400X4200 MM VARIKLIS: 22 KW VARIKLIO APSUKOS: 3000 APS./MIN.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: VF7YASMFA12B24879, rida: 81 000 km, galia: 81 kW (110,13 AG), pirmoji registracija: 05/2016, kuro tipas: dyzelinas, didžiausias leistinas svoris: 900 kg, spalva: pilkas, Gamybos metai: 2016, Įranga: ABS, automobilio registracija, imobilaizerio sistema, oro kondicionavimas, oro pagalvė,

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 800 mm, stalo ilgis: 800 mm, tarpas tarp stulpų: 800 mm, atitraukimo jėga: 40 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 100/40 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial solution with a rigid four-column body structure, engineered for metal forming, deep drawing, and precision pressing applications. The frame is fabricated from St52 quality steel and subjected to stress relief treatment by vibratory methods. This design ensures high parallelism and perpendicularity tolerances are maintained over prolonged periods. The ram and cushion systems operate independently; stroke and pressure settings are precisely controlled via touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motor, and PLC-controlled architecture, the press delivers high efficiency, reliability, and a long service life. The automatic lubrication system and electronic filter contamination warnings minimize maintenance requirements. This model is an ideal solution for medium-scale serial production, die trial runs, and precision forming operations. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Applications - Metal spinning and forming operations - Deep drawing applications - Die trial runs and prototype production - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 tons CAPACITY (CUSHION): 40 tons DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm WELDING STRESS RELIEF: Via vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE FORMING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s Ppodpfxjx N Ulye Af Ujr MAIN CYLINDER BORE DIAMETER: Ø 230 mm – Ck45 CUSHION CYLINDER BORE DIAMETER: Ø 145 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM / CUSHION STROKE & TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFO: Viewable via display DIE MEMORY: Adjustable from screen LINEAR DISTANCE ENCODER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 2 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 800 mm, stalo ilgis: 2 600 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8 Guideways General Description Pedpfx Afox N T S Eo Uepr CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and pressing operations requiring extremely high tonnages. The 8-guideway H-frame structure ensures maximum rigidity during the pressing cycle, with stable parallelism and perpendicularity tolerances maintained throughout the full stroke. The CHP 2500 model is designed for automotive, heavy industry, defense, and high-tonnage die applications, featuring large table dimensions, a multi-cylinder main press configuration, and a high-capacity hydraulic system. The frame construction is stress-relieved using vibration methods to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - Welds certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Real-time monitoring of hydraulic oil temperature and system status on the display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 - Type: Steel construction, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2500 Tons - Movable Table Dimensions: 1800 × 2600 mm - Fixed Table Dimensions: 1800 × 2600 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress Relief: By vibration - Welds: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017) - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/sec - Movable Table Drawing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø565 mm – Ck45 (4 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 6500 mm - Approx. Width: 3950 mm - Approx. Depth: 2600 mm - Lower Table Height from Floor: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Control: DELTA - Touch Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 2 000 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type hydraulic presses are developed for heavy-duty forming, deep drawing, spinning, and die applications requiring extremely high tonnage. Thanks to the 8-guideway H-frame structure, maximum rigidity is achieved during pressing, and parallelism and perpendicularity tolerances are maintained throughout the long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful motor, offers a reliable and long-lasting solution for automotive, defense, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved by vibration to ensure stable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press type - Vibration stress-relieved frame structure - Bronze Zr14 guideway bearings - Welding procedures approved by TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 2000 - Type: Steel construction, 8-guideway H-frame press - Frame Material: St52 – ERDEMİR - Guideway Bearings: Bronze Zr14 - Capacity (Ram): 2000 Tons - Movable Table Dimensions: 1500 × 2500 mm - Fixed Table Dimensions: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress Relief: Vibration stress relief - Welding Procedure: WPQR and WPS approved by TÜRK-AK, certified to EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Movable Table Fast Descent Speed: 150 mm/sec - Movable Table Spinning Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6300 mm - Approximate Press Width: 3850 mm - Approximate Press Depth: 2500 mm - Table Height from Ground: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Encoder: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Ppsdpfjx N T Srsx Af Ujr Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 400 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are designed for deep drawing, forming, and heavy-duty shaping applications requiring high tonnage. The 8-guideway H-frame structure ensures maximum rigidity and stability during pressing operations, helping to maintain parallelism and perpendicularity tolerances. The CHP 1500 model offers a reliable solution for automotive, defense, heavy metal forming, and industrial production lines thanks to its large table dimensions, robust hydraulic system, and high stroke capacity. The frame is relieved of residual stress by vibration treatment, aiming for long-lasting, stable operation. ⚙️ Standard Equipment • Steel construction, H-frame press body with 8 guideways • Stress-relieved frame by vibration treatment • Bronze Zr14 slideway bearings • Welded assemblies approved by TURK-AK accredited WPQR and WPS procedures (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing according to CE standards • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically-controlled filter contamination warning • On-screen monitoring of hydraulic oil temperature and system status • Cooling system • Off-line filtration • Safety systems for operator protection • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1500 Type: Steel construction, H-frame body with 8 guideways Frame Material: St52 – ERDEMIR Guideway Bearing: Bronze Zr14 Capacity (Ram): 1500 tons Moving Table Size: 1500 × 2400 mm Fixed Table Size: 1500 × 2400 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1000 mm Pedjx N T R Ujpfx Af Ujpr Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration treatment Welding Procedure: Welding certified in compliance with EN ISO 15614-1/2017, approved by TURK-AK WPQR and WPS Max. Working Pressure: 250 bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø620 mm – Ck45 (2 units) Auxiliary Rapid Cylinders: 2 units Approximate Press Height: 6250 mm Approximate Press Width: 3750 mm Approximate Press Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 70 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 200 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8 Guides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, spinning, forming, and heavy-duty pressing applications. Thanks to the 8-guide H-frame construction, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model delivers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved by vibration method, ensuring balanced load distribution during pressing and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, H-frame body type with 8 guides - Frame structure stress-relieved by vibration - Bronze Zr14 slide bearings - Welding operations approved and accredited with WPQR and WPS by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Pjdpfx Afox N T Ruj Uepr - Design and manufacturing in accordance with CE standards - PLC controlled hydraulic system - 7" DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching materials 📐 Technical Specifications – CHP 1200 Type: Steel construction, H-frame body with 8 guides Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved by TÜRK-AK, with EN ISO 15614-1/2017 welding procedure certification Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Height of Press: 6100 mm Approx. Width of Press: 3550 mm Approx. Depth of Press: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 60 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 000 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 1000 H-Type Single-Action Hydraulic Press – 8-Guided Slides Ppedpfx Afex N T Rbe Uer General Description The CRONOSSTECH CHP series H-type single-action hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guided H-frame structure evenly distributes the high forces generated during pressing, ensuring maximum rigidity, precision, and long service life. The CHP 1000 model has been developed to deliver reliable and stable performance in heavy industrial production lines. CHP Series – Structural Features CHP series presses are engineered with heavy industrial conditions in mind. The frame and main support constructions are stress-relieved by vibration. Smooth force distribution and high precision are achieved throughout the ram movement thanks to bronze Zr14 slide bushings. ⚙️ Standard Equipment Steel construction, 8-slide H-type press frame Vibration stress-relieved frame structure Bronze Zr14 slide bushings WPQR & WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Design and manufacturing in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronics-controlled filter contamination alarm Real-time monitoring of hydraulic unit oil temperature and system status on the screen Cooling system Off-line filtration Two-hand control system Light curtain (standard for operator safety) SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-slide H-frame press type Frame Material: St52 – ERDEMİR Slide Bushing: Bronze Zr14 Capacity (Ram): 1000 Ton Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Ram Stroke: 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certification accredited by TÜRK-AK (EN ISO 15614-1/2017) Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6000 mm Approx. Press Width: 3450 mm Approx. Press Depth: 2400 mm Lower Table Height from Floor: 1450 mm Pre-Fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC System: DELTA Touch Screen Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approx. Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 800 t, eigos ilgis: 800 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guide H-frame structure ensures uniform distribution of forces generated during pressing, providing maximum rigidity and long-lasting operation. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered with heavy industry requirements in mind. The frame and main carrier components are stress-relieved by vibration. Bronze Zr14 guide bushings provide even load distribution and precise operation during ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Vibration stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Two-hand operation control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components Ppodsx N T Nkspfx Af Usr 📐 Technical Specifications – CHP 800 - Type: Steel construction, 8-guided H-frame press - Frame Material: St52 – ERDEMİR - Guide Bushing: Bronze Zr14 - Capacity (Ram): 800 Ton - Movable Table Size: 1500 × 2000 mm - Fixed Table Size: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS-certified welding accredited by TÜRK-AK; EN ISO 15614-1/2017 welding certificate (inspection by certified welding coordination engineers according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 (2 pcs) - Auxiliary Acceleration Cylinders: 2 pcs - Approximate Height: 6000 mm - Approximate Width: 3350 mm - Approximate Depth: 2700 mm - Lower Table Height from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 45 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 600 t, eigos ilgis: 800 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial machines developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guideway H-frame structure ensures balanced distribution of the high forces generated during pressing, delivering long-lasting and stable operation. The CHP 600 model is engineered to provide reliable performance in production processes requiring high tonnage. CHP Series – Structural Features CHP series presses are designed with consideration for heavy-duty operating conditions. The frame and supporting components are stress-relieved by vibration. The Bronze Zr14 slideway bearings ensure uniform load distribution and high precision throughout the ram motion. ⚙️ Standard Equipment Steel construction, 8-guideway H-type press frame Vibration-stress-relieved frame structure Bronze Zr14 slideway bearings TÜRK-AK accredited WPQR & WPS approved welding applications (EN ISO 15614-1:2017 / EN ISO 14731) Design and manufacturing compliant with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning Monitoring of hydraulic unit oil temperature and system status via display Cooling system Off-line filtration Two-hand control system Light barrier (as standard for operator safety) SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 600 Type: Steel construction, 8-guideway H-frame Body Material: St52 – ERDEMİR Slideway Bearing: Bronze Zr14 Capacity (Ram): 600 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/mt. Perpendicularity Tolerance: 60 micron/mt. Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress-relieving Welding Application: WPQR and WPS approved by TÜRK-AK, certified EN ISO 15614-1/2017 welding applications (supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø550 mm – Ck45 Pot Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Accelerating Cylinders: 2 pcs. Approximate Press Height: 5900 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2300 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 28 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Psdpfx Aex N T Iasf Uepr

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8 Guide Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions with high rigidity, developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guide H-frame design ensures stable and repeatable operation by evenly distributing the high loads generated during pressing. The CHP 500 model is engineered for heavy-duty production processes requiring high tonnage, targeting long service life and reliable performance. CHP Series – Structural Features CHP series presses are designed considering heavy-duty operating conditions. The frame and supporting components are stress-relieved by vibration. Bronze Zr14 slide bearings provide smooth load distribution and long-term precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guide slides - Stress-relieved frame and supporting components by vibration Podpsx N T H Aofx Af Ujpr - Bronze Zr14 slide bearings - Certified welding applications with WPQR & WPS approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen control panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic monitored filter clogging warning - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 500 - Type: Steel construction, H-frame with 8 guide slides - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Capacity (Ram): 500 Ton - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Minimum Clearance: 100 mm - Maximum Clearance: 1100 mm - Stress Relief: Vibration method - Welding Application: WPQR and WPS certification accredited by TÜRK-AK, welding process certificate per EN ISO 15614-1/2017 (inspected by certified welding coordination engineers according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moveable Table Rapid Down Speed: 150 mm/sec - Movable Table Pressing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Distance from Floor to Lower Table: 1400 mm - Pre-Fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Encoder: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 23 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 400 t, eigos ilgis: 800 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guided H-frame construction, the high loads generated during pressing operations are distributed evenly, ensuring stable and repeatable performance. The CHP 400 model is specifically engineered to deliver reliable, long-lasting heavy-duty performance where high tonnage is required. CHP Series – Structural Features CHP series presses are engineered for demanding industrial environments. The frame and supporting components are stress relieved by vibration. Bronze Zr14 guide bushings ensure smooth load distribution during ram motion, maintaining long-term precision. ⚙️ Standard Equipment - Steel construction, 8-slide H-type press frame - Vibration stress-relieved frame and carrier components - Bronze Zr14 guide bushings - WPQR & WPS certified welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacture according to CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage settings - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration system - Two-hand control system - Light barrier (standard operator safety feature) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-slide H-frame press Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 400 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Pjdpfx Afsx N T Hps Uepr Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibration stress relieving Welding Application: WPQR & WPS certified by TÜRK-AK, following EN ISO 15614-1/2017 (supervised by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Solution: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 300 t, eigos ilgis: 600 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 300 H-Type Single-Acting Hydraulic Press – 8-Guided Slideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-guided H-frame construction, the system evenly distributes high loads encountered during pressing operations, ensuring stable and repeatable performance. The CHP 300 model is engineered to deliver long-lasting, reliable performance for medium to high-tonnage production processes. CHP Series – Structural Features Designed to withstand heavy-duty operating conditions, CHP series presses feature a frame and load-bearing components stress-relieved by vibration. The bronze Zr14 slideway guides guarantee consistent load distribution during ram movement, maintaining long-term precision. ⚙️ Standard Equipment - 8-guided, H-type welded steel frame construction - Stress-relieved frame and load-bearing components via vibration - Bronze Zr14 slideway guides - WPQR & WPS certified welding by TÜRK-AK accredited process (EN ISO 15614-1:2017 / EN ISO 14731) - Machine construction designed and manufactured to CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen HMI - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS–SCHNEIDER switchgear components 📐 Technical Specifications – CHP 300 Type: Welded steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slideway Guide: Bronze Zr14 Capacity (Ram): 300 Ton Moving Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: By vibration Welding Certification: WPQR & WPS certified by TÜRK-AK (EN ISO 15614-1/2017), supervised by certified welding engineers in accordance with EN ISO 14731 Max. Working Pressure: 250 Bar Ppedpfex N T E Eex Af Uer Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Rapid Down Speed (Movable Table): 150 mm/s Pressing Speed (Movable Table): 12 mm/s Return Speed (Movable Table): 170 mm/s Main Cylinder Inner Diameter: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 4400 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Control: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.