Mostana Centro Tekinimo Staklės pirkti naudotą (51 050)

Būklė: geras (naudotas), Gamybos metai: 2010, Centre Lathe Manufacturer: JET Type: GHB-1330 Year: 2010 Hodpfxoqwgzqj Ai Heu Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix toolholder size A, 2 steadies, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Spindle bore: 38 mm Machine in good condition, from a training workshop. Machine documentation available.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEWLY Refurbished with Acceptance Protocol for New Machine Tolerances Technical Data: – Machine No. 1824 – Center Height: 180 mm – Center Distance: 1000 mm – Spindle Speeds: 13 to 2000 rpm – Spindle Bore: 56 mm – Short Taper Spindle Nose DIN 55029 Size 5 – Tailstock Morse Taper: MK 4 – Feeds: 0.026 to 0.888 mm/rev – Thread Types: Metric, Inch, Module, and Diametral Pitch – Metric Thread Pitches: 0.35 to 12 mm – Weight: approx. 1500 kg – Spindle Brake, switchable – Drive Power: 2.0/4.0 kW – Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: – 3-Axis Digital Readout by K&C, new, 12 months manufacturer’s warranty with operating manual Features: Switching mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching – 200 mm three-jaw chuck, wedge bar type, like new, 1 set of jaws – Multifix size B with 2 tool holders, NEW – Bed stop Hsdpevrcqdsfx Ai Hou – Machine feet – Coolant system – LED machine lamp For added safety, the machine is equipped with: – Electronic spindle guard – Spindle brake – 2 emergency stop switches On request: Covers for the lead and feed screw About the machine: This listing is for a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been reground and hand scraped. Acceptance inspection per test report. Painted in high-gloss 2K white. Accessories such as Multifix and chuck are new. For safety, the machine features a brake motor, electronic spindle guard, and two emergency stop switches—an absolutely as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely operator-friendly, allowing surfaces to be produced as finely as ground. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Būklė: naujas, Gamybos metai: 2022, The technique is intended for concentration, calming the mind, and decision-making. Hedpfx Aijyhahie Heu Dimensions; Height 2.8m , Diameter 1.6 m Made in Lithuania ,"MITRONAS Engineering"

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 660 mm, tekinimo skersmuo virš slankiojančio stalo: 900 mm, tekėjimo ilgis: 2 000 mm, veleno greitis (maks.): 710 aps./min, bendras svoris: 7 000 kg, Poreba TPK 90A1/2M Hedpowbd Dvjfx Ai Hou Futterdurchmesser: 800 mm Spitzenweite: 2.000 mm Umlaufdurchmesser über Bett: 900 mm Umlaufdurchmesser über Support: 660 mm Spindeldrehzahl: 710 min⁻¹ Gewicht: ca. 7.000 kg

Būklė: naudotas, Gamybos metai: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, traces of use present - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guides adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Cross-slide adjustment range ± 90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Easy-running, hardened and ground gearbox gears mounted in 2 adjustable precision taper roller bearings - Clearly arranged selection levers for feed speed adjustment - Enclosed design of the quick-shift feed gearbox - Gears and shafts hardened and ground, running in precision bearings in an oil bath - Switch with life-cycle calculation, tested according to EN ISO 13849 - Bed carriage forward/reverse operation switchable via control spindle - Central lubrication in bed carriage - Leadscrew cover - Emergency stop impact switch, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy, and tool-free adjustment via clamping lever - Heavily ribbed prism bed, induction hardened and precision ground, made from cast iron - Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete draining and cleaning per DIN - LED machine lamp in chip guard - Two gearbox speed ranges - Spindle bore / bar capacity Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for protective cable and hose routing Hsdpfex Dzxajx Ai Heu - Thread dial indicator scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 type D for 25 mm square tool bits - Digital position display DPA 21 - Glass scales Dimensions and weights Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working ranges Centre height: 280 mm Centre distance: 1910 mm Swing diameter over bed: 560 mm Swing diameter in bed gap: 790 mm Swing diameter over cross-slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Spindle speed control: electronically adjustable Electrical data Output power (motor): 7.5 kW Total connected load: 8.5 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant system Coolant pump power: 125 W Standards and approvals Standard: DIN EN 55011 Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Tool post mounting height max.: 25 mm Spindle taper: Ø 113 (taper 1:20) mm Thread cutting Metric pitch: 0.1 - 14 mm/rev Number of metric pitches: 47 Inch pitch: 112 - 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 - 7 mm/rev Number of module thread pitches: 34 Travels Compound slide travel: 130 mm Cross-slide travel: 316 mm Bed carriage travel: 1710 mm Feed range Longitudinal feed: 0.031 - 1.7 mm/rev Number of longitudinal feeds: 42 Plan feed range: 0.014 - 0.784 mm/rev Number of plan feeds: 42

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, veleno skylė: 105 mm, tekėjimo skersmuo: 710 mm, centro aukštis: 355 mm, tekėjimo ilgis: 1 500 mm, Tekinimo diametras tarpe: 960 mm, SN 710S x 1500 Pagaminimo metai: 2015 Acu Rite skaitmeninis ekranas Hedpfjvq Ibxex Ai Hou Mašinos lempa Aušinimo skysčio bakas Išilginis ribotuvas Nugarinis drožlių apsaugas Griebtuvo apsauga

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Fixed steady rest with roller-type centering pins for SUI 80 TRENCIN Capacity: 210 - 370 mm 365 - 520 mm Hsdeu Tvdbspfx Ai Hsu Available only as a set

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 800 mm, tekinimo skersmuo virš slankiojančio stalo: 800 mm, tekinimo skersmuo virš viršutinio vežimo: 530 mm, tekėjimo ilgis: 3 000 mm, The PORĘBA TPK-80/3M universal lathe has been extensively rebuilt and modernized by us. It features technical parameters that correspond to the specifications and operational documentation of a new machine, meets the technical acceptance standards of WOT and Polish norms, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, available for inspection at any time Technical Specifications: - Distance between centers/turning length: 3000 mm - Swing over bed: 800 mm - Swing over cross slide: 530 mm - Swing in gap: 1080 mm - Spindle bore: 95 mm Hjdsfknw Rspfx Ai Hsu - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Overall length: 5,000 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 6,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital readout for 2 axes, including display, installation, and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, PARDUODAMA - Emcomat 17D tekinimo staklės Metai: 2005 X/Z eiga: 220 / 710 mm Atstumas tarp centrų: 700 mm Aukštis virš centrų: 170 mm Maks. apsukos: 3000 aps./min Veleno galas: DIN 55029 Maks. variklio galia: 5,3 kW Griebtuvo skersmuo: 50 mm Vidinis kūgis: MT3 Hsdpfx Aexyziksi Heu Griebtuvo eiga: 120 mm Matmenys (I x P x A): 1650 x 1060 x 1635 mm Staklių svoris: 755 kg 3 ir 4 žandikaulių tekinta griebtuvai

Gamybos metai: 1993, būklė: paruoštas naudoti (naudotas), Vertical Turning Center Dörries Scharmann Model: VCE 2000/160 Pallet size: 1,600 mm Pallet load capacity: max. 8,000 kg Number of pallets: 13 units Table indexing: C-axis 0.001° Table cross travel (X): 2,300 mm Column longitudinal travel (Z): 1,500 mm Hsdsguk S Sepfx Ai Hsu Crossbeam positions: 9 steps of 100 mm Feed rate X/Y/Z: 1 – 6,000 mm/min Rapid traverse X/Y/Z: 8 m/min Max. turning diameter: 2,000 mm Max. workpiece height: 1,500 mm Main Spindle Spindle drive motor: 69 kW Spindle speed: 2.8 – 315 rpm ATC for turning: 59 positions - System 240.2 Live spindle – SK50 Spindle drive motor: 30 kW Spindle speed: 10 – 1,500 rpm ATC for SK50: 61 positions CNC control: Siemens Sinumerik 880M Accessories: - FMS with 13 pallets - 2 rotary loading stations - Coolant unit with filtration system - Coolant through spindle Machine weight: Approx. 40 t Year of manufacture: 1993 (See also further offers from this seller)

Gamybos metai: 1993, būklė: paruoštas naudoti (naudotas), Vertical Turning Machine Center Dörries Scharmann Type: VCE 2000/160 Pallet size: 1,600 mm Pallet load: max. 8,000 kg Number of pallets: 13 pcs Table indexing: C-axis 0.001° Table cross travel (X): 2,300 mm Column longitudinal travel (Z): 1,500 mm Crossbeam positions: 9 steps of 100 mm Feed X/Y/Z: 1 – 6,000 mm/min Rapid traverse X/Y/Z: 8 m/min Max. rotary diameter: 2,000 mm Max. workpiece height: 1,500 mm Main spindle: Spindle drive motor: 69 kW Hodpfx Aegulkioi Hju Spindle speed: 2.8 – 315 rpm ATC: 70 positions – system 240.2 Live spindle – SK50 Spindle drive motor: 30 kW Spindle speed: 10 – 1500 rpm CNC controller: Siemens Sinumerik 880M Accessories: FMS 13 pallets Rotary loading stations: 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight: approx. 40 t Year of manufacture: 1993 (2/2) (See also further offers from this advertiser)

Būklė: naujas, Bernardo Universal Lathe Solid 460 x 1000 Pro Centre Distance: 1000 mm Centre Height: 230 mm Swing Over Bed: 460 mm Swing Over Gap: 690 mm Swing Over Cross Slide: 270 mm Bed Width: 300 mm Spindle Bore: 80 mm Spindle Mount: DIN 55029, D1-8 Speed Range: (12) 25 - 1700 rpm Longitudinal Feed Range: (42) 0.055 - 3.065 mm/rev Cross Feed Range: (42) 0.025 - 1.386 mm/rev Metric Threads: (41) 0.1 - 14 mm Inch Threads: (60) 2 - 112 TPI Tailstock Quill Diameter: 60 mm Tailstock Quill Travel: 130 mm Tailstock Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (L x W x H): 2300 x 1080 x 1600 mm Weight approx.: 1675 kg Features • Modern main spindle bearings with precision angular contact ball bearings • Hardened and ground gears and shafts, including in the feed gearbox • Central, ergonomic control for feeds and threads with leadscrew and feed shaft • Large-dimensioned, hardened, and precision-ground gears • Simple, smooth and precise speed and feed selection • Standard with rapid traverse longitudinal and cross to reduce non-productive time • One-piece, heavily ribbed machine bed for maximum torsional rigidity and minimal vibration, ensuring high turning accuracy Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 Hedpfx Aijqwkd Uj Hju • Fixed steady rest – max. workpiece diameter 150 mm • Travelling steady rest – max. workpiece diameter 110 mm • Quick-change tool post with 4 tool holders • Safety cover for quick-change tool post • Motor with magnetic brake according to CE standard • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 live centers • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard • Operating tools

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Centras aukštis 180 mm Centras atstumas 1000 mm Maksimalus sukamasis skersmuo virš lovio: 356 mm Maksimalus sukamasis skersmuo be lovio tilto: 506 mm Maksimalus tekinimo skersmuo virš skersinio vezimo: 220 mm Maksimali tekinimo ilgis: 1000 mm Veleno galas: D1-4 / DIN55029 Veleno skylė: D38 mm Pjaunami sriegiai: metriniai, Withworth, modulio Veleno greitis: 45 – 1800 aps./min Veržliarakčio kūgis Morse 3 Veržliarakčio pinolo eiga: 120 mm Variklio galia: 2,4 kW Staklių svoris: 900 kg Staklių matmenys: 1945 x 785 x 1204 mm Priedai: Hsdpfxexbz Ebe Ai Hsu - 3 žandų 160 mm griebtuvas - 4 žandų 200 mm griebtuvas - Tvirtinimo plokštė D320 mm - 3 ašių skaitmeninis indikatorių sistema - Elektromechaninė veleno stabdis - Fiksuotas ir sukamasis centras - Fiksuotas smaigas - Aušinimo sistema - Halogeninė darbo lempa - Apsauga nuo drožlių - Griebtuvo apsauga - Įrankių laikiklio apsauga - Veržliarakčiai - Instrukcijų vadovai Naujas modelis, 0 darbo valandų. Prijungtas prie elektros. Parodinis eksponatas.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 90 mm, tekėjimo skersmuo: 630 mm, tekinimo skersmuo virš slankiojančio stalo: 630 mm, tekinimo skersmuo virš viršutinio vežimo: 380 mm, tekėjimo ilgis: 3 000 mm, quill skersmuo: 90 mm, bendras ilgis: 4 900 mm, bendras plotis: 1 420 mm, bendras aukštis: 1 590 mm, sukimosi greitis (maks.): 1 800 aps./min, sukimosi greitis (min.): 18 aps./min, bendras svoris: 3 700 kg, ruošinio svoris (maks.): 1 500 kg, veleno tvirtinimas: MK 6, The FAT TUR 630M/3M universal lathe has been comprehensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical inspection requirements of the WOT and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrical components. Hodpfed Eaa Eex Ai Hju Availability: in stock, powered up, ready for technical inspection. Technical specifications: - Distance between centers/turning length: 3000 mm - Swing over bed: 630 mm - Swing over cross slide: 380 mm - Spindle bore diameter: 90 mm - Maximum workpiece weight between centers: 1500 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 18 - 1800 - Feed range (mm/rev): Longitudinal: 0.05 – 3.26 Cross: 0.25 – 1.63 - Motor power: 15 kW - Overall dimensions: Overall length: 4900 mm Width: 1420 mm Height: 1500 mm Total weight: 3650 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at additional cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 10-140 mm, with rollers - Steady rest 10-180 mm, with rollers - Steady rest 140-300 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: naujas, Gamybos metai: 2024, Akcijos kaina: 42 000 € (vietoj 49 900 €), be PVM. Iš karto galima įsigyti / Pagaminta Italijoje. Įtraukta aukščiausios klasės įranga: - „Heidenhain ND5023“ 3 ašių padėties indikatorius - 5 padėčių ilginis atraminis blokas staklėms - „SRW-Amestra Multifix C“ greito keitimo laikiklis su 4 įdėklais - LED darbo zonos apšvietimas - „Spinelli“ lygiavimo plokštelių komplektas Standartinė įranga: - Dviguba mechaninė sankaba - Elektromagnetinis stabdys - Greiti žingsniai - Oro tiekimo sistema ant galinio stovo, kad būtų lengviau reguliuoti padėtį išilgai staklių lovio - Lovis, kojos, galinis stovas, galinis stovo laikiklis ir staklės iš ketaus - Lovio kreipiančiosios yra indukciškai grūdintos ir poliruotos - Galinis stovas su indukciškai grūdintais ir poliruotais pavarų ratais - Velenas sumontuotas ant didelio tikslumo guolių - Trinties neturintis staklės judėjimas - Elektros sistema sandariame spintelėje su „Siemens“ ir (arba) „Schneider“ komponentais - Veleno reduktoriaus įvorė - 2 ribiniai punktai - Drožlių apsauga su mikro jungikliu, revoliucinė plexiglass apsauga, galinė apsauga per visą staklių ilgį, apsauga nuo veleno ir gręžimo stiebo, avarinis sustabdymo mygtukas - Drožlių surinkimo bakas ant ratų - Aušinimo sistema su elektropumpu - Centrinė kreipiančiųjų tepimas su automatine pompa - Besisukantis ir fiksuotas fiksatorius - Servisinis įrankių rinkinys ir veržliarakčiai, patikros sertifikatas, elektros schema, naudojimo ir priežiūros vadovas - Staklės pagamintos pagal ES normas Papildoma įranga: - 3- / 4-žandų tvirtinimo įrenginys Techniniai duomenys: - Ašies aukštis: 260 mm - Maksimalus apdirbamojo detalės skersmuo virš lovio: 520 mm - Maksimalus apdirbamojo detalės skersmuo virš staklių judančios dalies: 300 mm - Maksimalus apdirbamojo detalės skersmuo be tilto: 690 mm - Ašies atstumas: 1500 mm - Lovio plotis: 400 mm - Veleno skersmuo: 105 mm - Veleno kūgis: 11" Camlock - Veleno greičio lygiai: 12 - Veleno greitis: 16 - 1200 aps./min - Pagrindinio variklio galia (S1 - 100 %): 7,5 kW (pasirenkama 9,2 kW) - Ilgalaikis judėjimas: (93) 0,028 - 6,43 / (65) 0,063 - 2,52 mm/aps. - Skersinis judėjimas: (93) 0,012 - 2,73 / (65) 0,027 - 1,07 mm/aps. Hodpfepq R Rdsx Ai Hsu - Metrinė sriegio žingsnis: (54) 0,5 - 224 / (22) 1 - 14 mm - Whitworth sriegis: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modulinis sriegis: (54) 0,5 - 112 / (18) 0,5 - 7 mm - Diametrinis žingsnis: (54) 1/4 - 64 / (24) 4 - 56 dp - Skersinio judėjimo kelias: 340 mm - Viršutinio judėjimo kelias: 150 mm - Galinio stovo kūgio skersmuo: 85 mm - Galinio stovo kūgio judėjimas: 200 mm - Galinio stovo kūgio tvirtinimas: MK5 - Bendras svoris: 3200 kg

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 190 mm, tekėjimo skersmuo: 330 mm, plotis centre: 650 mm, 3-jaw chuck Steel tool post Tailstock Technical data: Center distance: 650 mm Swing over bed: 330 mm Swing over cross slide: 190 mm Spindle bore: 36 mm Spindle speed range: 30–2500 rpm Hodpfswtx A Dsx Ai Hou Drive power: 2.2 kW Machine weight approx.: 600 kg Technical data, accessories, and machine description are non-binding.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis Digital Readout K&C NEW. Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 87 160 760 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose, DIN 55027 Size 5 with Bayonet Lock >> Tailstock Taper: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: Approx. 680 kg >> Spindle Brake, Switchable >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories & Equipment: >> 3-axis Digital Readout by K&C, new, 12 months manufacturer warranty, with instruction manual Functions: mm/inch switching, ABS/INC coordinate mode, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching Hedjvrdlcspfx Ai Hou >> New collet chuck system; NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating instructions, spare parts list (PDF) About the Machine: This listing is for a Weiler Praktikant 160 B engine and feed shaft lathe, refurbished to toolmaker accuracy and fully geometrically overhauled. Supplied with inspection protocol for new machine tolerances. For safety: electronic working spindle guard, lead and feed shaft covers, two emergency stops, and a braked motor. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site to satisfy yourself of its condition.

Būklė: labai geros būklės (naudotas), Voest DA 180 Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: VOEST ALPINE Lathe Leadscrew and feed shaft lathe, model DA 180/1, year of manufacture 1981 Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock quill: Morse Taper 4 Coolant system Motor: 380 Volt, 5.5 kW 12 spindle speeds: 44 - 2,000 rpm 66 longitudinal feeds: 0.072 - 4.038 mm/rev Hodpexp I D Tsfx Ai Heu 66 cross feeds: 0.036 - 2.019 mm/rev 66 metric threads: 0.5 - 28 mm 66 inch threads: 1 - 32 TPI 66 module threads: 0.25 - 14 66 DP threads: 2 - 112 3-jaw chuck Weight approx. 1,200 kg Accessories and Equipment: 1 piece Röhm 3-jaw chuck 200 mm Multifix size B Digital readout About the Machine: We are offering a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. Even at high speeds, the Voest runs very quietly. This newer generation of lathes is very user-friendly, and ground-like surface finishes can be achieved. Take this opportunity to see the machine under power on site and judge its condition for yourself. You will find further drilling machines from renowned manufacturers on our website.

Būklė: geras (naudotas), Gamybos metai: 2004, Multipurpose Lathe ELBERON Type: GRC300X750 Hsdpfx Aijwah Rqs Hsu Chuck: 130 mm In good condition. For technical data, please refer to the data sheets.

Būklė: geras (naudotas), Gamybos metai: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special machine construction department of a renowned German mechanical engineering company. CE-compliant! Hedpfxjxyvaqe Ai Heu Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working Area Travel in X/Y/Z: 135 / - / 590 mm Distance between centers: 650 mm Center height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MT 2 Quill stroke: 80 mm Dimensions Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest standards: with infinitely variable speed control, constant cutting speed, and an impressive 7.5 kW drive power (40% duty cycle). This compact powerhouse is found wherever maximum precision is required in limited space—such as optical, electrical, and automotive workshops, laboratories, and even in Formula 1 applications. For sale: EMCO EMCOMAT 14 D lathe with Emco digital readout, year 2006. This lathe is in very good original condition. It comes from a facility where it was only lightly used for special projects. Very easy-to-use control. The guideways are automatically lubricated via central lubrication. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power at our location. More lathes from renowned manufacturers can be found on our website.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Display, NEWLY Refurbished with Inspection Report for New Machine Tolerances Technical Specifications: >> Machine No. 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread cutting possible: Metric, Inch, Module and Diametral Pitch >> Metric Thread Pitch: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake switchable >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis K&C Digital Readout, new, 12 months manufacturer's warranty with user manual Functions: mm/inch selection, coordinate choice ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 200 mm wedge-bar 3-jaw chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant device >> LED machine lamp For safety the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the Machine: Hjdpfx Asvrckqji Hju Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been newly ground and scraped. Delivery includes an acceptance report according to inspection protocol. Coated with high-gloss 2K white paint. The Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs extremely smoothly. This latest generation of Weiler lathes is especially user-friendly and allows the production of ground-like finishes. You are welcome to inspect the machine under power on site to convince yourself of its condition.

Būklė: naudotas, Hydraulic self-centering steady rest, Lünette, Lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Steady rest base: 245 x 240 mm Design: fixed Hedpfxoiv Irlo Ai Hou - 3 pcs. roller bearings Ø 35 mm - Roller width: 18 mm - hydraulic self-centering Dimensions (L x W x H): 350 x 250 x 550 mm Net weight: 65 kg Good condition

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Universal lead and feed screw lathe Brand: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light grey Machine No.: 1401 with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electric interlock, new - Size B quick-change toolpost base - Bed stop - Coolant system - Chip guard/rear panel - Operating manual - used, as seen - Hedpfjg R S Rcex Ai Hou

Būklė: geras (naudotas), Gamybos metai: 1972, LZ tekinimo staklės Gamintojas: HEIDENREICH & HERBECK, modelis: 21RO, pagamintos 1972 m. Su greito keitimo laikikliu Parat, 10 vnt., staklių dokumentacija, sriegių rodyklė, konuso centras, Forkardt 250 mm griebtuvas. Hedpfx Aot Ipi Ioi Hju Didžiausias tekinimo diametras virš lovio: 430 mm Didžiausias tekinimo diametras virš atramos: 255 mm Centro atstumas: 1000 mm Tekinimo ilgis: 750 mm Velieno apsisukimų skaičius: 19-2000 aps./min., 5,5 kW variklis Velieno anga: 56 mm Kiti duomenys žr. duomenų lape Užimamas plotas: ilgis 2900 mm, plotis 1100 mm, aukštis 1300 mm, svoris apie 1750 kg. Prieinami staklių dokumentai. Yra aušinimo įranga, drožlių atitvaras. Staklės geros būklės, galima parodyti su įjungta elektra.

Būklė: geras (naudotas), Gamybos metai: 1962, LZ tekinimo staklės, gamintojas VDF HEIDENREICH&HARBECK, tipas: 24 RO, pagaminta 1962 m., kapitaliai suremontuota 1992 m. Su 3 ašių skaitmeniniu indikatoriumi Heidenhain, 250 mm Forkardt griebtuvu, Multifix B įrankio laikikliu. Centros aukštis: 255 mm Tekinimo skersmuo virš lovos: 510 mm Tekinimo skersmuo virš skersinio vežimo: 270 mm Centro atstumas: 1000 mm Veleno anga: 55 mm Veleno apsukų diapazonas: 20–900 aps./min. Hjdpfxoxziuwo Ai Hsu Variklio galia: 6,5 kW Staklės geros būklės, yra elektros schemos. Reikalinga vieta: ilgis 3 m, plotis 1,2 m, aukštis 1,3 m, svoris apie 1800 kg.