Miwe Co 1.0806 pirkti naudotą (27 426)

Būklė: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm Rsdpfx Aenh R Ekof Aot • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location

Būklė: naujas, Gamybos metai: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both stationary and directly at the assembly site, up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide robust drive force. The motor speed is automatically adjusted, resulting in rapid return motion and shorter cycle times. Position detection directly on the bending axis ensures optimal bending accuracy and extremely high repeatability. The bending angle can be set to 0.5° simply and quickly via push buttons. A large LCD display shows the angles clearly. The ability to store up to three bending angles allows efficient bending of tubes with different bending results. For transport, the compact unit with accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube and rotating tool” principle ensures a minimal footprint during bending. Sliding shoes are used for thin-walled tubes to ensure wrinkle-free bends and to achieve arcs with minimal deformation, for example, in stainless steel and copper tubes. Using the PB20 profile bending attachment, flat, square, and round bar stock can be bent with ease. POTENTIAL APPLICATION AREAS: • Hydraulic piping • Prototyping • Plumbing and heating installation • Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm, depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation is possible • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency converter and three-phase motor • 3 programmable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Mini bending device KBV • Special tools as required OUR SERVICE: • Welcome for test production in our in-house demo room • On-site consultation and information session Redpfx Afjnfvx Ne Aot • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: This compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional caster wheels. A robust three-phase motor and a precision gearbox provide powerful drive. The machine stands out for its compact and slim design as well as its highly accessible bending area. Position detection directly on the bending axis ensures optimal accuracy. The bending angle is set simply and quickly via a user-friendly, menu-guided touchscreen interface available in 14 languages, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction control allows variable speed adjustment for forward and return travel, and features a programmable overbending function to compensate for material springback. With the aid of four material characteristic curves, the material is automatically overbent to the required angle, ensuring precise results. The “stationary tube and rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are employed to achieve crease-free bending and to bend curves with minimal deformation, for example with stainless steel and copper tubes. The PB20 profile bending attachment allows for easy bending of flat, square, and round steel. The small-radius bending device (KBV) attachment makes extremely small bending radii possible. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunction machine control with bending angle setting (0.1°) • Maximum bending angle: 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii starting from 45 mm, includes 40 mm hexagonal shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small-radius bending device • Special tools as per specification • Customized software for special applications OUR SERVICE: Redpfxjndk N As Af Aot • Welcome to test production in our in-house demo room • Consultation and information session on your premises • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in for your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring a manual eccentric quick clamping system for tube fixing, allows for efficient bending operations. The compact drive unit with a detachable mandrel carrier provides advantages for use directly at the installation site. Position feedback directly on the bending axis ensures optimal bending precision. The bending angle is set quickly and easily via a user-friendly touchscreen control with a menu-guided interface. The comfort control enables two selectable speeds, as well as a parameterizable overbending function to compensate for material springback. The bending process is greatly shortened thanks to an automatic 'clear travel' at the end of the bend. For more complex bending tasks, programs can be stored, managing a sequence of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be saved on the control unit or a USB stick. Plug-in bending tools allow for quick changeover to different tube sizes. For demanding geometries, the machine's bending direction can be easily changed to right- or left-hand bending as standard. The open bending unit enables, for example, the fabrication of railing frames with only one welding seam. Optional calculation software for the PC calculates the cut length for the entire geometry and determines the feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching a certain bending angle. POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping Redonfvy Uepfx Af Aot • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Max. 180º bend result • Weight 300-500 kg (depending on version) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital length and twist measurement (resolution 0.1) • Remote operation of all functions at the carriage (rotation and length stop) • Bending radius up to 250 mm • PC pipe calculation software OUR SERVICE: • Welcome to test production in our in-house demo room • Consulting and information sessions at your site • Consultation and processing for leasing/finance purchases via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII For tube dimensions from 20 - 90 mm, this bending system provides solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there is ample room for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the robust and rigid design of the mandrel carrier and bending arm, contribute to the desired bending result. The plug-in bending tools allow for quick changeover to other tube dimensions. The clamping pressure for tube fixation can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube length. For monitoring the springback values, a freely programmable database for up to 200 materials is available. The control system offers two operating modes: In 'Simple Bending', the system automatically displays the length and rotation of the bows relative to each other. In 'Controlled Bending' mode, the data is pre-set, and a continuous target/actual comparison is performed during the bending process. Also available with pneumatic stop or with gear-assisted length and rotation positioning. APPLICATION AREAS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal construction • Prototyping • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm depending on material • Bending radius min/max: 40 mm/250 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø ) • Multifunction machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Maximum 180º bending angle • Weight: 1600-3200 kg (depending on model) • Ergonomic operation via safety foot switch Rodpfenh R Susx Af Aot OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-release chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Semi-automatic positioning of length and rotation via servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WiFi), or USB OUR SERVICE: • Welcome to test production at our facility in the demonstration room • Consultation and information meeting at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation Redpfong Amkjx Af Ast TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter • Maximum bending result up to 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: • Welcome to test production at our in-house demo room • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high Rsdpfx Ajng A R Ssf Ajt • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY This compact and mobile bending machine enables precise and repeatable bending up to an outside diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox provide robust drive power. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is set quickly and easily via a user-friendly, menu-guided touchscreen interface, which guarantees even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with angle sequences of up to 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and return motions, and a parametrizable overbend function compensates for material spring-back. Thanks to four selectable material curves, the material is automatically overbent to the required angle, ensuring a precise bending result. The “stationary pipe, rotating tool” principle ensures a minimal footprint during bending operations. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to bend arcs with minimal deformation in materials such as stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent effortlessly. The KBV small-radius bending attachment enables extremely tight bending radii. POSSIBLE APPLICATION AREAS: • Plant engineering • Hydraulic piping • Serpentine/Meander bending • Prototype construction • Plumbing and heating installation Rsdpeng Ax Ssfx Af Ajt TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Bending radius min/max: 36 mm / 280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1° increments) • Maximum bending angle: 240° • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop • Weight: 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bar up to max. 100 x 10 mm, round bar up to max. 20 mm • Roll bender RB43 – the RB43 mounts to the hex shaft on the bending axis. Switching to continuous bending mode transforms the system into a drive unit. • Small-radius bending attachment KBV • Special tooling according to specifications OUR ON-SITE SERVICE FOR YOU: • Welcome to test production at our facility in the demo room • Consultation and information meeting at your premises • Consulting and financing/leasing arrangements • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: FP-201610-09, darbinis plotis: 960 mm, ritinio plotis: 1 000 mm, vynų diametras: 1 500 mm, Puikiai veikianti flexografinė spaudos įranga Redpfevkp Dnox Af Ast

Būklė: geras (naudotas), 941 NAUDOTA duonos kepimo krosnis, vežimėlinė krosnis, rotacinė, elektrinė. TECHNINIAI DUOMENYS: - Krosnis skardoms/vežimėliams 60/80, - galia 72 kW. Rodpfxsyxlpbe Af Aot IŠORINIAI MATMENYS (cm): - plotis: 173, - gylis: 170, - aukštis: 263. Įrenginys paruoštas apžiūrai yra mūsų sandėlyje (36-068 Bachórz, Lenkija). Nurodyta kaina yra grynoji kaina. Papildomos mokamos galimybės: transportavimas. KALBAME: ANGLŲ, VOKIETIŠKAI, PRANCŪZIŠKAI, RUSIŠKAI, UKRAINIETIŠKAI.

Būklė: nepatikrintas (naudotas), Asortimentas – pneumatiniai spaustuvai, cilindrai Tünkers, DE-STA-CO ir kt. Apie 50 vnt. su daug priedų ir atsarginių dalių ----- Prekės būklė: Rsdpfxey Akq Ee Af Aot Prekė iš atsarginių dalių sandėlio likvidavimo. Mūsų patikrinta nebuvo. Vidinis numeris: 484

Gamybos metai: 2024, veikimo valandos: 1 h, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have powered up the machine and let it run unloaded for a few minutes to verify its functionality. It comes with 4 nylon containers, each with a capacity of 25 liters. Additionally, 120 kg of zirconia balls with a diameter of 1 mm are available. ~ Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a device designed for industrial applications, engineered for medium production capacities to meet the manufacturing requirements of enterprises. It facilitates the seamless transition of materials from laboratory scale to production, ensuring process consistency and reproducibility, thereby enabling consistently high performance of the produced materials. The system is widely used in sectors such as new energy, metallurgy, electronics, ceramics, geology, mining, building materials, chemical industry, light industry, cosmetics, environmental protection, and various material processing departments of enterprises. The extremely high centrifugal forces generated by planetary ball mills create significant pulverization energy, resulting in very short grinding cycles. They are suitable for industries where the quality control process demands the highest levels of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is ideally suited for research tasks at scientific institutes, universities, and corporate laboratories to investigate the scalability of mass production processes, as well as for routine tasks such as mixing and homogenizing soft, hard, brittle, or fibrous materials, from experimental scale up to full production. - Key Features: - High-performance nano-scale grinding - Digital display, user-friendly operation, precise parameter settings - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing for up to 4×6/9 L samples, simultaneous handling of 4 different materials - Electric lid opening and integrated crane for convenience and ease of use - Storage for 3 modes and 15 programs - Power failure protection with memory function and auto-restart Rsdpfx Afsyilnze Ast - Suitable for dry milling, wet milling, vacuum milling, and inert atmosphere milling - Machine stops when the lid is opened, with automatic locking to prevent unintentional opening - Equipped with casters and rotatable feet for easy movement and stable positioning during operation Applications: Grinding, mixing, homogenization, colloidal milling, mechanical alloying, mechanochemistry Fields of use: New energy, geology/metallurgy, glass/ceramics, engineering/electronics, construction materials, environment/recycling, agriculture, chemicals, medicine, biology Feed materials: Soft, hard, brittle, fibrous – dry or wet Comminution principle: Impact, friction Feed size: < 5 mm (soil), < 10 mm Final fineness: For colloidal grinding, sample finer than 0.1 micron Number of grinding stations: 4 Milling modes: Dry milling, wet milling, vacuum milling, milling under protective atmosphere

Gamybos metai: 2012, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9332067, RIEDANTIS TRANSPORTERIS - KONSTRUKCINĖ SMĖLIAVIMO ĮRANGA GAMINTOJAS: RUMP TIPAS: 20-W 1500-4 Gamintojas: Rump Tipas: 20W-1500-4 Pagaminimo metai: 2012 Išmatavimus ir darbo valandas rasite techniniame brėžinyje. Komplekte yra filtravimo sistema, garso izoliacija, elektros skydinė, pilna dokumentacija ir kt. PUIKIOS BŪKLĖS Tai veikiantis, naudotas įrenginys. Parduodama be garantijos ir be jokių įsipareigojimų. Pasiliekama teisė į tarpinius pardavimus ir galimas klaidas. Rjdpfx Aoy Entijf Ast

Būklė: beveik kaip naujas (naudotas), Miwe Condo 60x80 met rijskast eronder Rjdpswycb Dofx Af Aot

Būklė: beveik kaip naujas (naudotas), Miwe Econo bakoven voor 10 platen met rijskast Redpfx Afswyccbe Aet

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 20 331 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 970 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, bendras svoris: 33 000 kg, Good day, We hereby offer you, without obligation, a used, complete bale press line consisting of a baler from HSM, type VK 8818 R-FU including conveyor technology and wire feed stations. The following technical data have been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot accept any liability. Technical data – press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Pressing force, main press: 1000 kN Specific pressing force: 120 N/cm² Pressing force, shearing edge ejector: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm; variable length, 600 up to 2000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights at a bale length of approx. 1.2 m: 650 – 750 kg/bale, depending on material Hydraulic oil tank capacity: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Overall press dimensions assembled: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor system): 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of the press: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Rjdpfjyz Af Ejx Af Ajt Special equipment ordered additionally: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with identical output performance Manual switching on/off of the number of wire ties to save strapping wire on non-expansive materials Shearing edge ejector with 121 kN pressing force Sensor-based wire monitoring with press shutdown in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the press: The entire press line (baler and conveyor system) is in good, immediately operational condition. The system was cleaned weekly by the operator, lubricated and serviced as specified by the manufacturer. Technical data – chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Incline belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: HSM VK 8818 R-FU baler Maintenance platform Bale chute Wire feed stations Wire roll trolleys (without wire rolls) Stadler chain belt conveyor KF 1800 Transverse sliding belt conveyor Pit cover from feed conveyor to pit Second control cabinet for press operation at the conveyor Machine documentation in English Delivery time: The entire line is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other baling presses is of interest to you. Your Service Team Mertens & Frowein GmbH

Būklė: geras (naudotas), 963 USED Rack Oven, Thermal Oil, Deck Type. TECHNICAL SPECIFICATIONS: Baking surface: 12 m² EXTERNAL DIMENSIONS (in cm): - Height: 260 - Width: 175 - Length: 260 + hood 70 Rjdpfxjvb Ubme Af Aet The equipment is available in various technical conditions and price levels: 1. Directly from the bakery. 2. After inspection, with a start-up guarantee. 3. After refurbishment, with a 6-12 month warranty. The machine is available for viewing in our warehouse (36-068 Bachórz, Poland). Additional paid options: refurbishment / transport / installation / commissioning. The listed price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Gamybos metai: 2024, būklė: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Screw Diameter [mm]: 20 Screw Length [L/D]: 25 Rodpfxshx Elfe Af Aet Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Reduction Gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply.

Būklė: naudotas, Gamybos metai: 2004, veikimo valandos: 7 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: DRI 04320080, rida: 100 km, bendras svoris: 7 000 kg, kuro tipas: dyzelinas, spalva: mėlyna, darbinė masė: 14 000 kg, didžiausias leistinas svoris: 15 000 kg, grandinės būklė: 50 procentas, Strypo skersmuo (maks.): 61 mm, Vamzdžio skersmuo (maks.): 400 mm, Įranga: guminės vikšrinės juostos, hidraulinis kūjis, kabina, German horizontal drilling rig for boreholes up to 200 meters in length, with a thrust/push force of 15 tons plus impact (28 tons) by hydraulic hammer. Rubber tracks, travel speed up to 3 km/h. Suitable for laying underground pipes up to Ø 400 mm. Maximum drilling depth: 5 meters with wireless navigation system. Manufacturer: TRACTO-TECHNIK GmbH & Co, year 2004. 7,800 operating hours. Components and units: - Hydraulic-driven carriage, HATZ diesel engine, 4-cylinder, operator cabin - 3 drill rod boxes (each with 48 rods x 3 m) = 144 rods (432 meters total) Operating options: 1. Rod handling manipulator 2. Semi-automatic rod clamp and pullback Mixing plant (8056D) with hydraulic station (TT-M2) DRI 8904.B, DEUTZ 4-cylinder diesel engine, bentonite pump P-72, two preparation tanks for bentonite (each 4,000 liters), two BÖRGER rotary pumps for mixing Connection cable for mixing plant Bentonite hose reel Drilling heads: 2 pcs. Reamer Ø110, Swivel 5 t Reamers: Ø280 with swivel, Ø315 with swivel, Ø385 with swivel Rsdjy H H Uuspfx Af Ajt Navigation system: Eclipse New spare working units (adapter, shaft, bushing) Price incl. VAT.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, 340 NAUDOTA duonos kepimo krosnis MIWE IDEAL. Gamybos metai: 2003. TECHNINIAI DUOMENYS: - kepimo kamerų skaičius: 5, - 1 išvažiuojanti kamera. IŠORINIAI MATMENYS (cm): - plotis: 160, - aukštis: 275, - ilgis: 270 (+70 – gartraukis). Rsdpfxsyua Uvo Af Aot KAMEROS MATMENYS (cm): - plotis: 120, - gylis: 168, - aukštis: 18/17. Įrenginys paruoštas apžiūrai mūsų sandėlyje (36-068 Bachórz, Lenkija). Mokamos galimybės: remontas / transportavimas / montavimas / paleidimas. Nurodyta kaina yra grynoji vienos krosnies kaina. KALBAME ANGLŲ, VOKIETIŠKAI, PRANCŪZIŠKAI, RUSIŠKAI, UKRAINIETIŠKAI.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2020, veikimo valandos: 50 h, mašinos/transporto priemonės numeris: LW250*1000, Dekanterzentrifuge, Baujahr 2020, aber erst im Mai 2021 in Betrieb genommen! Die Maschine befindet sich in neuwertigem Zustand (insgesamt ca. 50 Betriebsstunden)! Der Verkauf des Dekanters erfolgt aufgrund eines Technologiewechsels, das Gerät funktioniert einwandfrei! Hersteller: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Baujahr: 2020 Seriennummer: LW250*1000 Maschinensignal: 02-001 Dekanterkennnummer: 2647 Schlammaufnahmekapazität des Dekanters: 500 kg/h Hauptmotorleistung: 7,5 kW Nebenmotorleistung: 3 kW Redpfx Aepu A D Ajf Ast Kapazität: 1-5 m³/h Nettogewicht des Dekanters: 1.000 kg Werkstoff der medienberührten Teile: 1.4404 (Edelstahl) Fördervolumenstrom: 0,5 t – 3 t/h Edelstahl-Referenznummer: 2590

Būklė: geras (naudotas), Gamybos metai: 2004, 329 NAUDOTA Miwe GVA šaldymo fermentavimo kamera. IŠORINIAI MATMENYS (cm): - aukštis: 260, - ilgis: 390, - plotis: 180. VIDINIAI MATMENYS (cm): - aukštis: 190, - ilgis: 335, - plotis: 140. Nurodyta kaina yra be PVM. Kalbame angliškai, vokiškai, prancūziškai, rusiškai ir ukrainietiškai. Mūsų sandėlyje yra daug kepyklinių krosnių: lentyninės, rotacinės, dujinės, alyvos, elektrinės, įvairių gamintojų. Taip pat siūlome mašinas, kepyklos įrangą, bandelių ir duonos linijas. Norėdami pamatyti visą mūsų atnaujintą pasiūlą, apsilankykite mūsų Bakeres profilyje. Rjdpfsyqnvyjx Af Aet

Gamybos metai: 2014, būklė: labai geros būklės (naudotas), 328 NAUDOTA rotacinė vežimėlio krosnis MIWE Roll In 60/80. Gamybos metai: 2014. Redpfx Aoyqnq Djf Aet IŠORINIAI IŠMATAVIMAI (cm): - plotis: 155, - ilgis: 160 (su gartraukiu: 230), - aukštis: 257. Nurodyta kaina be PVM. KALBAME ANGLIŠKAI, VOKIŠKAI, PRANCIŪZIŠKAI, RUSIŠKAI, UKRAINIETIŠKAI. Mūsų asortimente rasite duonos kepimo krosnis, vežimėlių krosnis, lentynines krosnis, konditerijos krosnis, parduotuvių krosnis, duonos gamybos įrenginius, duonos linijas, bandelių linijas, pyragų linijas, kruasanų linijas, bagetų formavimo mašinas, maišykles, mikserius, tešlos kočiokles, ragelių formavimo įrenginius. Peržiūrėkite visus mūsų skelbimus.

Būklė: naujas, mašinos/transporto priemonės numeris: 37 R9633-2, Drilling diameter with twist drill up to: 13 mm Drilling diameter with core drill up to: 35 mm Drill stroke: 115 mm Motor power: 680 W Electrical connection: 220/240 V Rodpfxec N T Hro Af Ajt Magnetic base dimensions: 92 x 172 mm Weight: 13 kg

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, keliamoji galia: 3 500 kg, kėlimo aukštis: 6 000 mm, kuro tipas: elektrinis, HT-30 Stivuitor Electric cu Clește — 3,5T / Înălțime de Ridicare 6m HT-30 este un stivuitor electric robust și performant, proiectat pentru operațiuni solicitante în depozite și industrie, unde este necesară ridicarea precisă la înălțime. Construit pe baza unui catarg din oțel tip H de 120 mm, acesta oferă stabilitate și durabilitate excepționale în orice condiții de operare. Specificații principale: Capacitate de ridicare: 3.500 kg Catarg triplu cu înălțime maximă de ridicare de 6 metri Lungime furci: 1.220 mm Clește de transport inclus Transmisie și sistem de propulsie: Motor de ridicare AC 10 kW Motor de deplasare AC 7,5 kW Anvelope solide, rezistente la uzură sporită, pentru o durată lungă de viață Echipamente de siguranță și confort: Iluminare LED de lucru, semnalizatoare stânga/dreapta, stopuri și faruri de deplasare Panou de bord LCD Claxon electric Centură de siguranță Catargul triplu și înălțimea de ridicare de 6 metri fac acest utilaj ideal pentru depozite cu rafturi înalte. Configurația cu motoare AC asigură întreținere redusă, frânare regenerativă și control lin și precis al sarcinilor. Cleștele integrat adaugă versatilitate la manipularea mărfurilor fără palet, precum role, butoaie sau baloți. Rodpfx Afsyymkie Ajt Stare: Nou Disponibilitate: În stoc