Dyzelino Bakas pirkti naudotą (3 791)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2011, Used steel storage tank in accordance with EN 12285-1 (with inspection certificate), double-walled, suitable for underground storage of heating oil and diesel fuels, featuring 1 manhole (alternatively available with 2 manholes). Csdpfx Aoi Enxdsa Doha Capacity: 100,000 litres Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Additionally, we can equip our tanks with the following accessories: - Leak monitoring systems with under- and overpressure leak detectors - Manhole chamber with access cover, available in walkable or drive-over versions - Partition walls (for multi-compartment tank configuration) - Internal coatings (e.g. 2-component epoxy resin), partial or complete linings - Content and level measurement devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or petrol - Dispensers for diesel, biodiesel, and petrol – optionally available with complete fuel management systems - External tank insulation with PU foam The tank is internally cleaned, and the external coating has been completely refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply inform us of the delivery location, and you will receive an immediate quote for exact freight costs. If you require any further information, please do not hesitate to call us or send us an email. We also offer trade-in and purchase of tanks/containers—please contact us for more details. Delivery time by arrangement! We also keep similar tanks continuously in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Būklė: visiškai atnaujintas (naudotas), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, equipped with saddle supports, 1 manhole, visual leak detection device, overfill prevention device, and complete tank fittings consisting of: Csdpfx Ajvm Uwxea Deha - 3" filling pipe with TW cap - 1" dip tube with dipstick - Euroflex 3 suction combination (max. 150 l/hour) - 1 vent connection 2" with vent cap. The tank is factory-equipped with the fittings mentioned above and is internally cleaned. Capacity: 40,000 liters Diameter: 2,500 mm Length: approx. 8,700 mm Weight: approx. 7,200 kg The tank can be supplied with a new coating in your desired RAL color and optionally equipped with a ladder including operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery location and you will promptly receive the exact freight costs. If you need further information, just give us a call or send us an email. Trade-in and purchase of tanks/containers is possible—please contact us for further details. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Būklė: visiškai atnaujintas (naudotas), Used storage tank made of steel according to DIN 6616/2 (with inspection certificate), double-walled, suitable for above-ground storage, equipped with saddle supports, 1 manhole, optical leak detector, overfill prevention device, and complete tank fittings consisting of: - 3" fill pipe with TW cap - 1" dip tube with measuring rod - Euroflex 3 suction combination (max. 150 l/h) - 1 vent nozzle 2" with vent cap. The tank is factory-equipped with the aforementioned fittings and is cleaned inside. Capacity: 60,000 litres Diameter: 2,500 mm Length: approx. 12,650 mm Weight: approx. 9,950 kg The tank can be newly painted in your desired RAL colour and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and you will promptly receive the exact freight charges. If you require further information, feel free to call us or send us an email. Trade-in and purchase of tanks/containers possible—just ask us! Delivery time upon agreement! Cedpfsvm Uxiex Aa Doha Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Būklė: visiškai atnaujintas (naudotas), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 manhole, optical leak detector, overfill prevention device, and complete tank fittings consisting of: - 3" filling pipe with TW cap - 1" dip tube with measuring rod - Euroflex 3 extraction unit (max. 150 l/h) - 1 vent pipe 2" with vent cap. Csdpohvmiwjfx Aa Doha The tank is factory-equipped with the above fittings and is cleaned internally. Capacity: 50,000 litres Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be supplied with a new coating in your preferred RAL colour and can optionally be fitted with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery location and you will immediately receive a precise freight quote. If you require further information, just give us a call or send us an e-mail. We also accept trade-ins and purchase used tanks/containers. Please contact us for details. Delivery time by arrangement! We always have these types of tanks in stock in the following sizes as well: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Būklė: visiškai atnaujintas (naudotas), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, suitable for above-ground storage, equipped with saddle supports, one manhole, optical leak detector, overfill prevention device, and complete tank fittings consisting of: Chedpfjguzhcsx Aa Doa - 3" fill pipe with TW closure - 1" dip pipe with dipstick - Suction combination with suction line (1 1/2" or 2") - 2" vent nozzle with vent cap The tank is factory-fitted with the aforementioned fittings and has been cleaned internally. Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg The tank can be supplied with a new coating in your desired RAL color and can optionally be equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery location and we will promptly inform you of the exact freight costs. If you require any further information, feel free to call us or send us an email. Trade-in and purchase of tanks/containers is possible; just contact us for details. Delivery time by arrangement. We always have similar tanks available in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Būklė: visiškai atnaujintas (naudotas), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, equipped with saddle supports, one manhole, optical leak detector, level limiter, and complete tank fitting consisting of: - 3" filling pipe with TW cap - 1" dip tube with gauge rod - Euroflex 3 suction combination (max. 150 l/h) - 1 ventilation nozzle 2" with vent cap Csdpevm Uvnjfx Aa Djha The tank is factory-fitted with the above-mentioned fixtures and is cleaned internally. Capacity: 30,000 liters Diameter: 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,200 kg The tank can be provided with new paintwork in your desired RAL color and optionally equipped with a ladder including operator platform. Cost-effective delivery with our own truck is possible. Simply inform us of the delivery location and you will promptly receive the exact freight costs. If you need further information, please do not hesitate to call or email us. Trade-in and purchase of tanks/containers is possible, just contact us regarding this. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Būklė: visiškai atnaujintas (naudotas), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 manhole, optical leak detector, overfill prevention device, and complete tank fittings comprising: - 3" fill pipe with TW cap - 1" dip tube with dipstick - Euroflex 3 suction unit (max. 150 l/h) - 1 vent connection 2" with vent cap The tank is factory-fitted with the aforementioned fittings and is internally cleaned. Capacity: 80,000 litres Diameter: 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg The tank can optionally be supplied with a new paint finish in your desired RAL colour and equipped with a ladder including an operating platform. Cost-effective delivery by our own truck is possible. Simply let us know your delivery location, and you will promptly receive the exact shipping costs. If you require further information, please feel free to call us or send us an email. Trade-in and purchase of tanks/containers is possible—just give us a call to discuss this. Delivery time by arrangement! Chjdpfshvidgox Aa Doa We also always have similar tanks in the following sizes available from stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, and 100,000 litres Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst Tel: 07251 / 915119 Fax: 07251 / 915175

Būklė: visiškai atnaujintas (naudotas), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 manhole, optical leak detector, overfill prevention device and complete tank fittings consisting of: - 3" fill pipe with TW cap - 1" dip pipe with dipstick - Euroflex 3 suction combination (max. 150 l/h) - 1 vent connection 2" with vent cap. Codsvm Uuwepfx Aa Doha The tank is factory-equipped with the above-mentioned fittings and is cleaned internally. Capacity: 25,000 litres Diameter: 2,000 mm Length: approx. 8,400 mm Weight: approx. 3,500 kg The tank can be supplied with a new paint finish in your preferred RAL colour and optionally fitted with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery location and you will immediately receive the exact freight costs. If you require further information, just call us or send us an email. Trade-in and purchase of tanks/containers is possible, please contact us for details. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Būklė: visiškai atnaujintas (naudotas), Used steel storage tank according to DIN 6616/2 (with inspection certificate), double-walled, for above-ground storage, with saddle feet, 1 manhole, visual leak detector, overfill prevention device, and complete tank fittings consisting of: - 3" fill pipe with TW cap - 1" dip pipe with dipstick - Euroflex 3 suction combination (max. 150 l/h) - 2" vent nozzle with vent cap. The tank is factory-equipped with the above-mentioned fittings and is internally cleaned. Capacity: 16,000 litres Diameter: 2,000 mm Length: approx. 5,475 mm Weight: approx. 2,500 kg Chodpfx Aaovm Urvs Doa The tank can be supplied with a new coating in your desired RAL colour and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know the delivery location and you will promptly receive the exact shipping costs. If you need further information, just call us or send us an email. Trade-in and purchase of tanks/containers is possible – feel free to contact us regarding this. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H2X392H00704, Gamybos metai: 2017, veikimo valandos: 13 718 h, keliamoji galia: 2 500 kg, kėlimo aukštis: 3 450 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 2 377 mm, Nėra minimalios kainos – garantuotas pardavimas už aukščiausią pasiūlymą! TECHNINĖS SPECIFIKACIJOS Keltuvės talpa: 2 500 kg Kėlimo aukštis: 3 450 mm Chsdpfxjzrgbps Aa Dea APIE ĮRENGINĮ Degalų tipas: dyzelinas Stiebo tipas: paprastas ISO klasė: 2 (1000–2500 kg) Konstrukcinis aukštis: 2 377 mm ĮRANGA Šoninis stumtuvas 3-iasis hidraulinis vožtuvas Išorinis identifikatorius: SL12069SP

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 487965, Gamybos metai: 2015, veikimo valandos: 7 430 h, keliamoji galia: 2 500 kg, kėlimo aukštis: 4 800 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, šakių ilgis: 1 190 mm, TECHNINĖS CHARAKTERISTIKOS Kėlimo aukštis: 4 800 mm Kėlimoji galia: 2 500 kg Šakių ilgis: 1 190 mm Maksimalus šakių plotis: 1 060 mm Minimalus šakių plotis: 250 mm MAŠINOS CHARAKTERISTIKOS Stiebo tipas: dvigubas Degalų tipas: dyzelinas Eksploatavimo valandos: 7 430 val. Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 2 700 x 1 180 x 3 150 mm Svoris be apkrovos: 3 853 kg Cjdpfezrmrhex Aa Djha ĮRANGA Šoninis poslinkis Darbinis žibintas Pusė kabinos Dokumentacija CE ženklas

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2015, veikimo valandos: 11 600 h, keliamoji galia: 2 500 kg, kėlimo aukštis: 5 515 mm, laisvas kėlimas: 1 811 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 454 mm, pavaros tipas: Diesel, Dyzelinis šakinis krautuvas ISO klasė: ISO klasė 2 = 1 000–2 500 kg Stiebo tipas: Triplex Būklė: Paruoštas naudoti, visiškai veikiantis Techninė būklė: gera Aprašymas: Pusė kabinos Chodpfx Aaezri Sws Doa Šoninis poslinkio įtaisas, šakių reguliavimo įtaisas, 3-iasis vožtuvas, 4-asis vožtuvas.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, veikimo valandos: 14 606 h, keliamoji galia: 3 500 kg, kėlimo aukštis: 5 505 mm, laisvas kėlimas: 1 724 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 491 mm, pavaros tipas: Diesel, Dyzelinis šakinis krautuvas ISO klasė: ISO klasė 3 = 2 500–4 999 kg Stiebo tipas: Triplex Būklė: Paruoštas naudoti, visiškai veikiantis Techninė būklė: gera Cedpjzri R Hefx Aa Djha Aprašymas: Pusiau uždara kabina Šoninis poslinkio mechanizmas, 3-iasis vožtuvas, 4-asis vožtuvas.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, veikimo valandos: 16 326 h, keliamoji galia: 4 500 kg, kėlimo aukštis: 5 365 mm, laisvas kėlimas: 1 760 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 625 mm, pavaros tipas: Diesel, Dyzelinis krautuvas ISO klasė: ISO klasė 3 = 2 500 - 4 999 kg Codpfxszri N Ns Aa Doha Stiebo tipas: Triplex Būklė: Paruoštas naudojimui ir pilnai veikiantis Techninė būklė: gera Aprašymas: Pusiau kabina 3-ias vožtuvas, 4-as vožtuvas,

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: - LUFT 700 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer - 500 L horizontal compressed air receiver tank Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors from the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: - They achieve efficiency levels compliant with IE4 or even IE5 standards - They maintain high efficiency even at very low RPMs (standard motors lose efficiency outside their nominal range) - They are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control At the heart of the Energy Saver line is the frequency inverter (VSD). - Demand-based adjustment: The compressor does not operate in an "all or nothing" (load/unload) system. If your machine only requires 30% output, the compressor will reduce speed, consuming proportionately less energy. - Idle running eliminated: Classic compressors often run for several minutes after the tank is filled, consuming around 25–30% of nominal power without producing air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these devices start smoothly from 0 Hz. This means there are no sudden current peaks at startup, which: - Protects your facility’s electrical installation - Allows for more frequent starts and stops without risking winding overheating 4. Real Savings In practice, the Energy Saver series allows you to cut electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable line pressure (accuracy of up to 0.1 bar), essential for precision tools such as laser cutters. Extended service life: The absence of sudden pressure and temperature spikes prolongs the screw stage’s lifespan. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Free air delivery 0-6 bar: approx. 690 L/min Chjdpeycg Rysfx Aa Doa Free air delivery at 6 bar: 690 L/min Free air delivery at 8 bar: 650 L/min Free air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 1840 x 640 x 1470 mm Weight: 320 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 1500 VSD+PM Compact Screw Compressor with Dryer – a compact set for demanding applications – ENERGY SAVER SET INCLUDES: - LUFT 1500 VSD+PM COMPACT Screw Compressor with integrated dryer. - Horizontal 500 L Compressed Air Receiver. Key features that set these models apart: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series use Permanent Magnet motors. Compared to standard induction motors: - They provide efficiency levels compliant with IE4 or even IE5 standards. - Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range). - Are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). - Demand-adaptive: The compressor does not work in a fixed "on/off" (load/unload) cycle. If your facility requires only 30% output, the compressor reduces RPM accordingly, consuming proportionally less energy. - Idle-running elimination: Conventional compressors often continue to run for several minutes after filling the tank, drawing about 25–30% of nominal power without producing compressed air. Energy Saver models almost completely eliminate this wasteful operation. 3. Soft Start Thanks to the VSD, these units start up smoothly from 0 Hz. This means no sudden current surges during start-up, which: - Protects your factory’s electrical installation. - Allows for more frequent start/stop cycles without risk of motor winding overheating. 4. Real Savings In practice, using the Energy Saver line enables reduction of electricity bills by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains a very stable network pressure (accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: the absence of sudden pressure and temperature fluctuations extends the lifespan of the screw stage. Technical specifications Motor power: 11 kW / 15 HP Voltage: 400V/50Hz Output at 0-6 bar: 1620 L/min Chedpfx Aoychbasa Doa Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 x 740 x 1750 mm Weight: 500 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT Screw Compressor with integrated dryer. 270 L Horizontal Compressed Air Receiver Tank. Here are the key features that set these models apart: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: They offer efficiency levels compliant with IE4 or even IE5 standards. Maintain high performance even at very low rpm (standard motors lose efficiency outside their nominal range). They are smaller, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) Chjdpfxjycg I So Aa Dea The heart of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in a simple on/off (load/unload) mode. If your machine only requires 30% capacity, the compressor reduces its speed accordingly, consuming proportionally less energy. Idle run elimination: Classic compressors often operate for several minutes after the tank is full, using approx. 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process entirely. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means there are no sudden current surges during startup, which: Protects your facility’s electrical installation. Allows for more frequent start/stop cycles without the risk of winding overheating. 4. Significant Energy Savings In practice, using the Energy Saver line allows electricity bills to be reduced by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable network pressure (accurate to 0.1 bar), which is crucial for precise devices such as laser cutters. Longer service life: The absence of sudden pressure and temperature fluctuations extends the lifespan of the screw block. Technical specifications Motor Power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Output 0-6 bar: avg. 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet port diameter (G): 1/2" Dimensions: 1495 x 520 x 1340 mm Weight: 250 kg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2015, veikimo valandos: 9 802 h, keliamoji galia: 4 000 kg, kėlimo aukštis: 4 400 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 3 070 mm, pavaros tipas: Diesel, Dyzelinis krautuvas Chjdozqh T Ropfx Aa Dsa ISO klasė: ISO klasė 3 = 2.500 - 4.999 kg Stiebo tipas: Standartinis Būklė: Paruoštas naudojimui ir visiškai veikiantis Techninė būklė: gera Aprašymas: Pusapvalė kabina 3-iasis vožtuvas, 4-asis vožtuvas, šildymas,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, veikimo valandos: 287 h, keliamoji galia: 8 000 kg, kėlimo aukštis: 5 430 mm, laisvas kėlimas: 1 700 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 3 080 mm, šakių laikiklio plotis: 2 380 mm, šakių ilgis: 2 500 mm, tuščias svoris: 13 215 kg, bendras ilgis: 4 100 mm, pavaros tipas: Diesel, statybos plotis: 2 210 mm, Diesel forklift Load center: 900 mm Fork width: 180 mm Fork thickness: 70 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 8.25-15 Rear tires type: Superelastic Rear tires size: 8.25-15 Description: In addition to this Clark model, we currently have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide detailed advice on this C80D900. P.S.: Our forklift master workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts from 8 t upwards. We are also happy to offer your vehicle for consignment sale in our facility. Cedpezrqpqjfx Aa Djha Sideshift, fork positioner, Cab heater, full cabin, full free lift,

Būklė: naudotas, Funkcionalumas: neveikiantis, Gamybos metai: 2007, keliamoji galia: 7 000 kg, kėlimo aukštis: 4 000 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 3 100 mm, šakių laikiklio plotis: 2 100 mm, tuščias svoris: 10 784 kg, pavaros tipas: Diesel, Dyzelinis šakinis krautuvas Naudingosios apkrovos centras: 600 Stiebo tipas: standartinis Cedpfsza Iy Dox Aa Doha Techninė būklė: skirtas naudoti kaip atsarginių dalių šaltinis Priekinių padangų tipas: superelastinės Priekinių padangų dydis: 355/65-15 Galinių padangų tipas: superelastinės Galinių padangų dydis: 3.00-15 Aprašymas: R70-70 – šakinis krautuvas, skirtas atsarginėms dalims – Forklift for spare parts Pilna kabina, Šakinis krautuvas, skirtas atsarginėms dalims – Forklift for spare parts

Būklė: naudotas, kuro tipas: elektrinis, Keleinamoji galia: 10 000 kg Atstumas tarp ratų ašių: apie 4 150 mm Šakių ilgis: apie 2 000 mm Chodpfx Aajzq Hk Io Dja Matmenys (ilgis x plotis x aukštis): apie 6,20 x 2,35 x 3,20 m Remiantis mūsų įvertinimu, įrenginys yra geros būklės, naudotas, ir jį galima apžiūrėti susitarus dėl laiko. Priedai, paveikslėlyje pavaizduoti įrankiai ir tvirtinimo elementai yra įtraukti į tiekimo komplektą tik tuo atveju, jei tai nurodyta papildomoje informacijoje. Pasilieka teisė keisti technines specifikacijas ir duomenis bei parduoti įrenginį prieš tai, kai bus susitarta dėl apžiūros!

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, veikimo valandos: 155 h, keliamoji galia: 16 000 kg, kėlimo aukštis: 4 000 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 3 695 mm, šakių laikiklio plotis: 2 500 mm, šakių ilgis: 2 400 mm, tuščias svoris: 23 680 kg, bendras ilgis: 5 400 mm, pavaros tipas: Diesel, statybos plotis: 2 450 mm, Dyzelinis krautuvas Naudos svorio centras: 1200 Šakių plotis: 250 mm Šakių storis: 100 mm Stiebo tipas: standartinis Būklė: paruoštas naudoti, visiškai funkcionalus Techninė būklė: labai gera Priekinių padangų tipas: pneumatinės Priekinių padangų dydis: 12.00-20 Galinių padangų tipas: superelastingos Codpfezq H U Hex Aa Doha Galinių padangų dydis: 12.00-20 Aprašymas: be šio „Kalmar“ modelio, mūsų sandėlyje Hamburge ir Gdanske turime apie 200 sunkiasvorių krautuvų, kompaktiškų krautuvų, šakių krautuvų ir šoninių krautuvų. Apsilankykite mūsų svetainėje – sago-online. Nuomos su galimybe išpirkti ir finansavimo galimybės palankiomis sąlygomis visada yra prieinamos. Taip pat mielai nupirkime jūsų naudotą krautuvą, net jei nepirksite pas mus naujo. Mūsų įmonės savininkas p. Peteris Sawitzkis mielai išsamiai pakonsultuos jus dėl šio DCG160-12. P.S.: mūsų krautuvų remonto dirbtuvės specializuojasi krautuvų remonte, priežiūroje, atnaujinime ir specialiųjų užsakymų gamyboje, skirtų krautuvams, kurių svoris didesnis nei 8 tonos. Taip pat mielai pasiūlysime parduoti jūsų krautuvą mūsų įmonėje per komisijos pardavimą. Šoninis stumdymas, šakių reguliavimo įtaisas, Šildytuvas, pilna kabina, oro kondicionierius.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 7 143 h, keliamoji galia: 12 000 kg, kėlimo aukštis: 3 100 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 3 230 mm, šakių laikiklio plotis: 2 500 mm, šakių ilgis: 2 400 mm, tuščias svoris: 18 270 kg, bendras ilgis: 4 600 mm, pavaros tipas: Diesel, statybos plotis: 2 500 mm, Dyzelinis šakinis krautuvas Naudingosios apkrovos centras: 600 Šakių plotis: 200 mm Šakių storis: 75 mm Codpey Sqcyofx Aa Dsha Stiebo tipas: standartinis Būklė: paruoštas naudoti, visiškai veikiantis Techninė būklė: labai gera Priekinių padangų tipas: superelastinės Priekinių padangų dydis: 10.00-20 Galinių padangų tipas: superelastinės Galinių padangų dydis: 10.00-20 Aprašymas: be šio „Hyster“ modelio, mūsų sandėlyje Hamburge ir Gdanske turime apie 200 sunkiasvorių šakinių krautuvų, kompaktiškų šakinių krautuvų ir šoninių šakinių krautuvų. Apsilankykite mūsų svetainėje – sago-online. Nuoma su galimybe išpirkti ir finansavimas palankiomis sąlygomis visada įmanomi. Taip pat mielai nupirkime jūsų naudotą krautuvą, net jei nepirksite naujo pas mus. Mūsų savininkas Peteris Sawitzki mielai išsamiai konsultuos jus dėl šio H12XM-6 modelio. P.S.: mūsų krautuvų remonto dirbtuvės specializuojasi šakinių krautuvų (nuo 8 tonų) remontuose, techninėje priežiūroje, atnaujinime ir modifikavime pagal užsakymą. Taip pat mielai pateiksime jūsų krautuvą pardavimui mūsų skelbimuose. Šoninis poslinkio mechanizmas, šakių reguliavimo įrenginys, Šakių reguliavimo įrenginio veikimo diapazonas: 600 / 2 350 mm Šildytuvas, pilna kabina.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 5 470 h, keliamoji galia: 8 000 kg, kėlimo aukštis: 3 500 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 2 600 mm, šakių laikiklio plotis: 2 000 mm, šakių ilgis: 2 200 mm, tuščias svoris: 11 800 kg, pavaros tipas: Diesel, Sunkvežimis krautuvas – dyzelinis Krovos centras: 900 Stiebo tipas: Duplex Būklė: Paruoštas darbui ir visiškai veikiantis Techninė būklė: labai gera Priekinės padangos tipas: pneumatinės Priekinės padangos dydis: 8.25R15 Priekinės padangos būklė: 60 - 80% Galinės padangos tipas: pneumatinės Galinės padangos dydis: 8.25R15 Galinės padangos būklė: 60 - 80% Šoninis stumtuvas, šakių padėties keitimo įtaisas, Cedpszq Ib Ujfx Aa Deha

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1990, veikimo valandos: 11 500 h, keliamoji galia: 20 000 kg, kėlimo aukštis: 6 000 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 4 800 mm, šakių laikiklio plotis: 2 900 mm, šakių ilgis: 2 400 mm, bendras ilgis: 6 100 mm, pavaros tipas: Diesel, statybos plotis: 3 050 mm, Sunkiojo svorio šakinis krautuvas – dyzelinis Chodpfx Aezq Ibuja Dea Naudingoji apkrova: 1200 Stiebo tipas: dvisluoksnis Transmisija: „Clark HR32“ – kapitaliai suremontuota 2021 m. Būklė: paruoštas naudoti, visiškai funkcionalus Techninė būklė: gera Priekinių ratų tipas: pneumatiniai Priekinių ratų dydis: 14.00-24 Priekinių ratų būklė: 80–100 % Galinių ratų tipas: pneumatiniai Galinių ratų dydis: 14.00-24 Galinių ratų būklė: 60–80 % nauja: šakės, pakėlimo grandinės, priekiniai ratai