Sriegių apdirbimo staklės pirkti naudotą (260)

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Iodpfsuz If Njx Ab Noti Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: naudotas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Itedpfx Abjh A S Hts Nji Tool bore diameter: 70 mm (nominal diameter) Tool mounting length, tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 – 44 – 95 – 190 rpm Hydraulic motor power: approx. 3 kW Roll drive motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic system integrated in the machine bed Space requirements (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools, with the same pitch as the workpiece, form the thread by penetrating the workpiece up to nominal diameter. The thread length can be at most as long as the thread rolling tools are wide. Through-feed Rolling: Used when the thread length is greater than the width of the thread rolling tool. Through-feed tools have three zones—the lead-in, the calibration section, and the lead-out. Grooving rolls have no pitch and are swiveled according to the thread angle of the profile to be rolled. Lead Rolls: These differ from grooving rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the pitch angle on the workpiece.

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Electronic Tapping Machine JT3150 Very easy operation via display directly on the motor, Blind hole depth programmable, Technical details: - Brushless motor 750 Watt 220V - Multifunctional head - 3-joint articulated arm system - Tapping capacity in steel: M3-M16 - Reach up to 1900 mm - Spindle GR2 Accessories: - Positioning magnet Gr.2 - Quick-change adapter Gr.2 - Collets for M3-M4-M5-M6-M8-M10-M12-M14-M16 Itodpfx Abshpqadj Noi - Control unit on the motor - Drill chuck (1-13 mm)

Gamybos metai: 2022, būklė: naujas, Pneumatic Tapping Arm Model: R1450-08 Capacity: M2-M8 Speed (rpm): 700 Air consumption: 750 l/min Pressure: 6-7 bar Isdeipmrkopfx Ab Nsti Working range: Rmax 1450 mm Parallel arm construction: Robust arm structure (hard aluminium profile 38x29) Weight: 23 kg Adapter mount: TCS 1B Model: R1450-12 Capacity: M3-M12 Speed (rpm): 400 Air consumption: 750 l/min Pressure: 6-7 bar Working range: Rmax 1450 mm Parallel arm construction: Robust arm structure (hard aluminium profile 38x29) Weight: 23 kg Adapter mount: TCS 1B Model: R1450-16 Capacity: M3-M16 Speed (rpm): 300 Air consumption: 950 l/min Pressure: 6-7 bar Working range: Rmax 1450 mm Parallel arm construction: Robust arm structure (hard aluminium profile 38x29) Weight: 27 kg Adapter mount: TCS 2B Model: R1450-020 Capacity: M3-M20 Speed (rpm): 150 / 400 Air consumption: 950 l/min Pressure: 6-7 bar Working range: Rmax 1450 mm Parallel arm construction: Robust arm structure (hard aluminium profile 58x40) Weight: 39 kg Adapter mount: TCS 2B Model: R1450-022 Capacity: M3-M22 Speed (rpm): 120 / 300 Air consumption: 950 l/min Pressure: 6-7 bar Working range: Rmax 1450 mm Parallel arm construction: Robust arm structure (hard aluminium profile 58x40) Weight: 39 kg Adapter mount: TCS 2B Model: R1450-027 Capacity: M3-M27 Speed (rpm): 70 / 220 Air consumption: 950 l/min Pressure: 6-7 bar Working range: Rmax 1450 mm Parallel arm construction: Robust arm structure (hard aluminium profile 58x40) Weight: 39 kg Adapter mount: TCS 2B Standard accessories for all models: - Parallel arm - Pneumatic drive motor - 6 safety torque limiters of your choice - Guide column with mounting flange - Radial boom (for a more flexible working area) - Maintenance unit - Pneumatic oil for initial filling

Būklė: naudotas, Gamybos metai: 2007, Spaudimas: 20 - 300 kN Valcavimo vežimo poslinkis: 50 mm Valcavimo veleno skersmuo: 120 mm Valcavimo veleno aukštis virš staklių lovos: 200 mm Valdymas: SIN 840 D Itodpfx Aew E Nmkeb Noi Valcavimo veleno tvirtinimo ilgis: 200 mm Valcavimo veleno apsisukimų dažnis: 0 - 50 1/min Sukimo momentas vienam valcavimo velenui: 2700 Nm Pavaros galia: 2 x 8,4 kW Atstumas tarp valcavimo velenų min. 271 / maks. 368 mm Maks. valcavimo įrankio išorinis skersmuo: 300 mm Bendras galios poreikis: 26 kW Mašinos svoris apie: 7,1 t Reikalinga patalpos vieta apie: 9,70 x 4,50 x 3,80 m CNC staklės dantų/siūlų valcavimui Valcavimo procesas hidraulinis Felsomat įkrovos ląstelė Pilnas apgaubimas

Būklė: naudotas, Sriegiklio laikiklis, sriegiklio galvutė WMW tipas GSA 2 Tvirtinimas: MK 2 Pjovimo diapazonas: M 5 - M 16 - reguliuojama slydimo sankaba Svoris: 3 kg Automatinis dešinės-kairės apsukų keitimas su laikikliu. Staklės nebūtinai turi turėti dešinės-kairės apsukų keitimą. Sriegiklis tvirtinamas tiek prie kotelio, tiek prie kvadrato reguliuojamomis tvirtinimo dalimis. Isdpfxexf Uymo Ab Neti Abi tvirtinimo dalys trūksta (bet jas nesudėtinga pagaminti) Skirtas dešiniam sriegiui pjauti.

Būklė: naudotas, Internal Thread Cutting Machine Hagen & Goebel Type HG 124 Machine No. 4112 Year of manufacture approx. 1980 Threading capacity in steel: M3 to M10 Threading capacity in cast iron: M3 to M15 Threading capacity in brass: M3 to M17.5 Throat depth: 250 mm Quill stroke: 80 mm Table size: 345 x 245 mm Spindle speed: 200 - 1000 rpm Motor power: 0.55 / 1.0 kW Power supply: 380 Volt, 50 Hz Itjdpfjhgnd Aex Ab Nei - 6 speed settings via belt change (3 stages via belt + 2 motor speeds) - Thread pitch adjustment via lead cartridge - 2 lead cartridges included with 0.8 mm and 28 TPI thread pitch - Table height adjustment with rack and pinion via hand crank on the round column - Spindle mount with taper Ø 14.8 to 16 mm - Keyed drill chuck Ø 1 to 13 mm Required floor space (L x W x H): 900 x 500 x 1800 mm Weight: 260 kg Good condition

Būklė: naudotas, Gamybos metai: 2004, ORT RP30 C. Sriegimo valcavimo staklės su 2 volais, 30 tonų, su elektroniniu greičio ir padėties valdymu. Bešepetėliniai varikliai volų sukimui, galimybė išsaugoti ruošinio parametrus. Įranga yra mūsų sandėlyje Gussago BS, galima pajungti ir išbandyti Mimu staklėse. Sriegio valcavimas/volavimas – tai mechaninis apdirbimas be drožlių šalinimo, atliekamas šaltu arba karštu būdu, siekiant pagerinti paviršiaus kokybę (tokiu būdu medžiaga tampa tvirtesnė ir atsparesnė). Itodpfx Absyzt T Ts Nji Galia (tona): 30 Volų kiekis: 2 PLC: Taip

Būklė: naujas, Thread diameter M6 - M36 Speed 30 - 150 rpm Working range max. 1200 mm Angle adjustable from 0 to 90 degrees Voltage 230 V Motor power 1200 W Weight 65.0 kg - Includes quick-change chuck Iedpfxsxab Elo Ab Nsti - For use with tap drills - Suitable for through and blind holes - Swivelling motor unit for thread cutting - Threading at any desired angle between 0° and 90° - Higher precision compared to manual thread cutting - The thread is guaranteed to be perpendicular (90°) - High productivity - Significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes large-radius swing arm - For easy positioning of the tap on the workpiece - High cost efficiency due to low investment and maintenance costs - Suitable for thread cutting in steel, stainless steel, aluminium and non-ferrous metals Scope of delivery: - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * Milled support surface 900 x 600 mm * Includes 3 T-slots (16 mm) * Large storage space and 2 drawers for tool storage * 4 swivel castors incl. locking brakes - Adaptors according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Būklė: naujas, Thread diameter up to M 24 Spindle speed: RPM Thread sizes: M5 - M24 Working range: 2050 mm (max. radius) Working range: 500 mm (min. radius) Working height: 900 mm Table size: 700 x 900 mm Oil capacity: 100 l Motor power: 3.0 kW Weight (incl. pallet system): approx. 300 kg Equipment: - Electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Including table clamping plate * Smooth pivoting movement, supported by installed gas pressure dampers - Mobile machine base * Integrated oil tank and hydraulic unit in the machine base * Hydraulic pressure gauge - Infinitely variable speed control - Vertical and horizontal tapping possible - Lateral sorting of quick-change inserts possible - Power supply cable with 16A plug Isdoxab Iaepfx Ab Njti Special accessories included / Quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22

Būklė: naujas, Thread diameter M5 - M24 Speed 70 - 200 rpm Working range max. 1200 mm Angle adjustable from 0 - 90 degrees Voltage 230 V Motor power 1200 W Weight 65.0 kg Itodpfjxaaybsx Ab Nsi - Equipped with a micro spray system for consistent cooling & minimal coolant consumption - Includes chip blowing device for removing chips, ensuring optimal visibility of the borehole - Includes quick-change chuck for use with taps for through and blind holes - Swiveling motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual threading, thread is guaranteed perpendicular (90°) - High productivity, significant time savings compared to manual threading - Quick-change chuck with integrated slip clutch prevents tap breakage - Includes swivel arm with large radius for easy positioning of the tap on the workpiece - Suitable for thread cutting in steel, stainless steel, aluminum, and non-ferrous metals Scope of delivery: - Touchscreen operation - Digital drilling depth display - Micro spray system - Chip blowing device - Quick-change holder - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: ...) Holders: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Būklė: naujas, Thread diameter: 20 mm Spindle speed: 400 rpm Thread size: M 4 - M 20 Working radius: max. 1900 mm Working radius: min. 200 mm Description: The AT models offer a working radius of up to 1900 mm and, due to their design, a flexible working area. Suitable for professional use. Easy to mount on a workbench. Features: - Includes 7 thread cutting inserts: • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Includes pneumatic motor - Adapter connection size 2 - Cutting head can swivel vertically downwards by 90° - Cutting head is mounted on bearings and can rotate 360° - Operating instructions in German Itedpfx Abexaaa Ie Nsi * Hole table as shown not included.

Būklė: naujas, Gamybos metai: 2024, Thread diameter up to M16 mm Speed 0 - 600 rpm Thread size M5 - M16 Working range 2050 mm (max.) Working range 500 mm (min.) Table size 900 mm Itjdpfeu Ag Raox Ab Nji Motor power 3.0 kW Weight approx. 250 kg Features: - Hydraulic thread cutting machine - Incl. machine base with clamping disc - Mobile - Hydraulic pressure gauge - Infinitely variable speed control - Vertical / horizontal thread cutting possible * Special accessories included: - 10x thread cutting inserts M05/M06/M08/M10/M12/M14/M16

Būklė: naujas, Thread diameter M6 - M36 mm Speed 156 rpm Radius 1200 mm Angle adjustable from 0 to 90 degrees Machine weight approx. 0.4 t Required space approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450136SET Fast and precise thread cutting with freely positionable pivot arm - Machine head swivels from 0 to 90 degrees Iedpfx Asg N Nl Isb Noti - Quick-change chuck with slip clutch for safe thread cutting without risk of breakage - Selectable right/left rotation on the machine head - Thread size, speed, pitch, and cutting depth can be set via touchscreen on the pivot arm - Manual mode: After reaching the preset cutting depth, the spindle stops automatically; forward and reverse have to be activated manually - Automatic mode: After reaching the preset cutting depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes Includes one each of tapping chucks GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Base frame 900 x 600 x 875 mm

Būklė: naujas, Thread diameter M6 - M24 mm Speed 200 rpm Radius 1200 mm Angle adjustable from 0 to 90 degrees Machine weight approx. 0.4 t Space required approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450124SET Fast and precise thread cutting with freely positionable pivoting arm - Machine head can be swiveled from 0 to 90 degrees - Quick-change chuck with slip clutch for safe thread cutting without risk of breakage - Reversible machine head (right/left rotation selectable) - Adjustment of thread size, speed, pitch, and cutting depth via touchscreen on the pivoting arm - Manual mode: After reaching the preset cutting depth, the spindle stops automatically and the forward/reverse run must be activated manually. - Automatic mode: After reaching the preset cutting depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes. Itedpjg N Nl Dofx Ab Nji Includes 1 each of tapping chuck GT24: M6, M8, M10, M12, M14, M16, M18, M20, M22-24 Base frame 900 x 600 x 875 mm

Būklė: paruoštas naudoti (naudotas), Siūlomas ProCon išorinis sūkurinis įrenginys, skirtas srieginių bei sukimosi ašyje simetriškų formų išoriniam apdirbimui. Montavimo aukštis: 180 mm, variklio galia: 7,5 kW, bedugnio veleno praėjimas: 160 mm, pasvirimo kampas į dešinę/kairę: 28°/45°, sukimosi greitis: 1800 aps./min, kampinė raiška: 0,1°, pjovimo ratai: SK70/SK90, pjovimo ratų lizdai SK70/SK90: 4(6)/8, pjovimo rato skylės SK70/SK90: 100 mm/120 mm, svoris: apie 120 kg. Yra dokumentacija. Galima apžiūra vietoje. Itjdpfx Abjxnbruo Nei

Būklė: naudotas, Thread Rolling Machine - ORT RP18 2-Roller Thread Rolling Machine Swiveling spindle Overhauled with Siemens PLC See video Isdeuua H Rjpfx Ab Nsti The machine is powered in our warehouse Test run possible

Būklė: visiškai atnaujintas (naudotas), Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Overhauled - new Siemens PLC See video The machine is in our warehouse in Gussago BS, powered up Test run possible Mimu Machine Tools Ijdpfxjvxa Dbo Ab Neti Thread rolling is a chipless mechanical process that can be performed either cold or hot, with the aim of improving surface finish (and thus fatigue resistance).

Būklė: visiškai atnaujintas (naudotas), CNC sriegimo valcavimo staklės – sriegių valcavimo staklės – elektroninis atnaujinimas su Siemens PLC ir jutikliniu ekranu Thommen PR17 CNC, 2 volai. Volų sukimosi greitis reguliuojamas elektroniniu būdu. Padėtis ir greitis valdomi elektroniniu būdu. Veleno skersmuo 54 mm. 2 atramų poros (uždaros ir atviros). Įranga yra mūsų sandėlyje Gussago BS, prijungta prie elektros tinklo. Itedeilh Tiopfx Ab Nei Galima bandomoji eiga. Mimu įrankinės mašinos. Valcavimas yra mechaninis procesas be drožlių šalinimo, atliekamas šaltai arba karštai, siekiant pagerinti paviršiaus kokybę (taip pat ir nuovargio savybes).

Būklė: naudotas, Thread rolling machine - thread rolling machine ORT RP18, 2-roller Shaft diameter 69.95 mm See video The machine is located at our warehouse in Gussago (BS), under power Test run possible Itjdpfjt Apugsx Ab Nei Mimu Werkzeugmaschinen Thread rolling is a mechanical process without material removal, which can be performed cold or hot. The main purpose is to improve surface quality (and thus the fatigue behavior).

Būklė: naudotas, Srieginimo valcavimo staklės ORT RP12 Itedpfxjyvk S Ao Ab Nsi 2 volai 12 tonų Prijungtos prie elektros mūsų sandėlyje Mimu įrankinės staklės (Italija)

Būklė: naudotas, Srieginės volų staklės ORT RP30U 2 volai 30 tonų Pasukami galvutės Itsdpfx Abot H Ty Uj Nji Keitiklis (inverteris) #1331 Mašina gali būti apžiūrima mūsų sandėlyje Gussago BS mieste dirbant. Yra galimybė parodyti įrangos veikimą. Sriegiavimo volavimas yra mechaninis procesas be pjovimo drožlių, jis gali būti atliekamas šaltai arba karštai, siekiant pagerinti paviršiaus kokybę (taip pat ir nuovargio savybes). Galia (tonomis): 30 Volelių skaičius: 2

Būklė: geras (naudotas), Max. thread cutting capacity up to M6 with thread pitch guide Throat depth: 130 mm Drive power: 0.55 kW Dimensions (L x W x H): approx. 350 x 650 x 750 mm Itjdpjnyh Tnjfx Ab Noi Weight: approx. 90 kg Accessories / Special features: • Thread pitch guides: 1 x pitch 0.5 mm 1 x pitch 0.6 mm 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm • Various adjustable working cycles such as: automatic operation, foot control Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: naudotas, Bench thread-cutting machine M1 - M10 Height adjustment via rack and hand crank Motor 0.22 + 0.32 kW Itodpfx Ajda I E Djb Nei Motor speed 1420/2770 rpm Spindle speed 480 - 580 rpm Weight 100 kg Thread tapping chuck with key Under-table construction Connection cable with 16 A CEE plug

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), Thread cutting machine, manufacturer: ROTHENBERGER Model: 3S-G, year approx. 2000 Without die head Equipped with pipe cutter and deburring device. Operates on 230V power supply. Itedpfxemn Thhj Ab Nji In excellent condition, like new.