Perdirbimas ir atliekų šalinimas pirkti naudotą (1 848)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced blade projection + 22 kW motor + Efficient square blades *For pallets: up to 10 pallets per hour *(dependent on screen size and material). Significantly higher throughput for smaller wood remnants. Motor: 22 kW; 400 V - 50 Hz - 3 ph Screen: 15/20 mm Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction port Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: System color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown in case of rotor idle - Speed 70-90 rpm for high throughput - Interval control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *As shown in the last 2 images. - Additional blade row + €2,790 - Segmented floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 Itedpfx Abjdv Eu Hjveg (Consider for plastic shredding with screens smaller than 15 mm or high fines content. Not necessary if greasing the bearings with lubricant every ~4 weeks during operation) - Raise shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €5,980 net - Control unit for conveyor belt and overbelt magnet + €2,750 net (Start and stop synchronized with shredder) - Outward-stretched feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Material feed must be free of metals and mineral impurities. Damage to the tools and/or increased wear may occur as a result

Būklė: naujas, Gamybos metai: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput capacity Options: Double blade row + €895 net Veneer and paper stripper + €970 net * Recommended for extremely thin materials with a thickness less than 3 mm Our mütek Single-Shaft Shredder MRZ 530 processes a variety of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine features a robust construction ensuring consistent quality in continuous operation. We are happy to offer a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight forwarding and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume: approx. 0.4 m³, Throughput capacity: 1 - 5 hopper fillings/hour, Hydraulically operated pusher, Screen perforation as required (10 - 40 mm), Extraction connection Ø 160 mm, Weight: approx. 1,000 kg, Dimensions: approx. 1550 x 1100 x 1640 mm, Moisture content of raw material must be under 30% (absolutely dry). Standard equipment included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta starting • Automatic shut-off in case of rotor idle • Removable extraction chute • Speed 70 - 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (conveyor preparation): +€1,980 net - Angled conveyor belt: +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Iodpfjd Db N Ijx Abvjtg Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet: +€5,980 net - Control for conveyor belt and overband magnet: +€2,750 net (Start and stop each synchronized with the shredder) Requirements for input/raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: naujas, Gamybos metai: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multiple reversible Hydraulically operated pusher Screen perforation of your choice (10 - 40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star-delta start - fast hydraulic system - automatic shut-off when rotor is idling - Speed: 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control for the hydraulic pusher - pertinax guides for the hydraulic pusher - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF panels, and other materials (subject to testing and approval by the manufacturer) Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: Isdpsd Dgw Usfx Abvetg - Moisture content (upon arrival) must be below 30% - Installation temperature: heated indoor area, at least +5°C - Metal and mineral impurities such as sand, stones, etc., lead to increased wear

Gamybos metai: 2025, būklė: naujas, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled plastic parts or for re-shredding wood chips. Further details can be provided after testing with your material. Our granulators are used for the size reduction of a wide range of materials such as plastics or wood. Shredders and granulators are suitable for diverse shredding tasks across various applications. For example, defective parts and sprues arising at injection moulding machines need to be reprocessed. In blow moulding operations, besides rejects, there are also waste pieces or startup hoses. Materials that can be processed include, among others, blow moulding materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Material is fed from above via a hopper into the cutting chamber of the granulator. The rotor inside is equipped with cutting knives. The material is shredded between the rotating blades and the stationary knives until it reaches a defined granulate size and passes through the screen beneath the rotor. *Optionally, the processed material can then be conveyed pneumatically to Big Bags, silos, or other containers. The price applies only to the granulator system as shown in Image 1 – fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput: up to 120 kg/h when shredding plastics *highly dependent on screen and material Application example: Size reduction of PE 1000 plastic Input material: approx. 40 mm chip length Final granulate size: approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ For G 30 wood chip re-shredding, significantly higher throughputs are possible – up to max. 400 kg/h with a 10 mm screen. *Metered feed, e.g. via conveyor belt or auger. Details after testing with approx. 30 kg. Rotor diameter: 180 mm Iedpfxsd N Dn Ds Abvjtg 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Exhaust connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – additional screens available Price per screen: €390 Price for spare knife set: €679 Suitable for, e.g.: - All types of plastic waste Materials such as HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Items from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems are also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optionally with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optionally with matching extraction/transport system --- The following information is required for machine configuration: - Length x Width x Height of input material? - Screen size required (to what granulate size)? - Desired hourly throughput in kg? - Wall thickness in mm? - Material description Photos may also be helpful.

Gamybos metai: 2024, būklė: naujas, Overview – of the various configurations *not every position is needed: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstration unit with discharge (only shown schematically in the image) *optional, if feeding with wheel loader is desired Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4 m Iodeff Sbiopfx Abvstg Four sieves are mounted on the underside, which are extracted. Unit price net from: €9,750 - Extraction components / hoses flat rate €945 net - Control system for entire plant Unit price net: €2,750 - Demonstration extraction unit MMJET 160 demo, with cleaning function Connection 160, Fan 2.2 kW Air capacity 1850 m³/400 V automatic compressed air cleaning Unit price net from: €6,950 - Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour at +/- 20 kg tfrom €59,995 net *A reference system (baler) is located at ZIP code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height adaptable upon request) Weight of bale +/- 20 kg (depending on material) Capacity: approx. 30 bales per hour Storage bin approx. 0.7 m³ volume Fill level sensors for min./max. fill level in the bin Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale ejection Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 kg mütek balers / packaging machines were developed for producing bales from various materials such as shredded miscanthus or elephant grass, wood shavings, sawdust, and shredded straw. The machine features robust construction, ensuring consistent quality during continuous operation. The baler compresses the material filled in the storage bin without any additional binding agents by means of hydraulic pressure and packs the material in plastic bags. The machine allows significant volume reduction, depending on the material. Maximum material moisture must not exceed 18% Atro. The mütek baler’s container can be filled automatically or manually and has a capacity of approx. 0.7 m³. Containers with larger volume or with integrated extraction and filter systems as a complete disposal unit are also available. In addition to automatic filling via de-dusting units, mütek also offers filling by means of screw conveyors. Both variants allow automatic dedusting. mütek balers are equipped with a control cabinet for system management. In the standard version, bale dimensions (width x depth x height) are 400 x 400 x 800 mm. Upon request, height can be adapted to your requirements. The following advantages result from baling: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Raw material requirements: - dry (max. 30% ATRO) - max. 35 mm length

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, The ideal machine for cable shredding including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, hydraulically operated ram Perforated screen as per choice (15 - 40mm) Itodpfxsgmfa Aj Abveg Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double blade row + €995 net (28 instead of 14) - Surcharge for four-sided segmented floor + €3,750 net (Prevents ram blockage. Recommended for shredding plastics, paper, veneer with a thickness less than 3 mm). - Raise shredder height by 30 cm (preparation for conveyor belt) +€1,980 net - Angled conveyor belt (discharge height approx. 220 cm) +€8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Material requirements: - Mineral contamination such as sand, stones, etc. will increase wear. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material by forwarding agent and we will document the test with pictures and videos.

Būklė: naujas, Gamybos metai: 2026, Extremely Powerful Industrial Magnet for Iron Separation Special price €990 net (Shipping €14.90 net) *Refer to image 2 for construction lengths The active side features a stainless steel end plate (material grade 1.4301). Threaded holes are provided on the rear side for mounting *Handle available upon request Block magnet systems can be used at operating temperatures up to max. +100°C. The magnetic surface should be routinely cleaned of collected ferrous materials. Pick-up heights for all versions, e.g.: Approx. 60 mm for an M5 steel nut Approx. 100 mm for an M5 x 30 screw Installation example 1: Isdpfetqfhxsx Abvotg Mounted above a conveyor belt, the iron parts "jump" to the magnet’s active surface. Installation example 2: Integrated in a pipeline system with direct contact to the material flow. For maximum separation reliability, a cascade arrangement of multiple block magnets in series is possible. Installation and safety instructions: During handling, unpacking, and installation, ensure no loose ferrous parts (such as tools or screws) are nearby. The magnetic force is extremely strong and can cause painful injuries if fingers are caught between ferrous parts and the active surface. No steel components should be present within a minimum distance of 400 mm beneath the active side.

Būklė: naujas, Gamybos metai: 2026, Ideali mašina minkštos medienos smulkinimui. . Variklis: 11/15 kW; 400 V - 50 Hz - 3 fazės, Rotoriaus skersmuo: 260 mm, hidrauliškai valdomas stūmiklis Kieto sieto angos pagal pageidavimą (12 - 40 mm) Ištraukimo jungtis Ø 160 mm Svoris apie 1.100 kg Itjdpfx Abjwzarcevsg Išmatavimai (ixpxa) apie 1805 x 1118 x 1650 mm Spalva: mėlyna / pilka Reikalavimai žaliavai: - Drėgmės kiekis (absoliutus) turi būti mažesnis kaip 30 % - Metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir pan., sukelia padidintą susidėvėjimą. . Maloniai kviečiame atlikti nemokamą bandymą su Jūsų medžiaga. Kviečiame Jus atvykti į Neckartailfingen. Taip pat galima, kad atsiųstumėte savo medžiagą per siuntų tarnybą, o bandymo eigą užfiksuosime nuotraukomis ir vaizdo įrašais.

Būklė: naujas, Gamybos metai: 2023, Length: approx. 2500 mm Width: approx. 400 mm Discharge height: approx. 1650 mm Weight: 290 kilograms Motor: 0.75 kW Isdpfev Srvvex Abvetg Ex works prices Shipping according to effort

Būklė: naudotas, Smulkinimo mašina MGZ 1330, 37 kW Darbo valandos: 275 Įskaičiuota: - 2-asis peilių eiliškumas - Greita hidraulika didesniam našumui - Paruošta konvejeriniam juostai Pasirenkama: - Konvejerinė juosta su automatiniu metalo separatoriumi Jūsų privalumai: + itin didelė pjovimo agregato anga; viršuje: 1300x1200 mm + specialus rotorius, tinkamas tiek kietmedžiui, tiek minkštmedžiui Iodpsx Tfdhsfx Abvotg + energiją taupanti ir galinga su 37 kW paleidimo galia Techniniai duomenys: Pajungimo anga viršuje (mm): 1.300 x 1.200 Piltuvo talpa (m³): 1,6 Rotoriaus skersmuo (mm): 368 Rotoriaus greitis (aps/min): 65–125 Galingumo poreikis (kW): 37 Sieto skylės (mm): pagal susitarimą Įrankiai: 37/70 peilių Ištraukimo antgalio Ø (mm): 200 Matmenys: 2430x2410x1735 mm (ilgis x plotis x aukštis) Svoris (apytiksliai kg): 3.500 --- Reikalavimai žaliavai: - Drėgnumas (atro) turi būti mažesnis nei 20 % - Tiekiama medžiaga turi būti be metalo ir mineralinių priemaišų. Priešingu atveju gali kilti įrankių pažeidimų ir/ar padidėti susidėvėjimas.

Būklė: geras (naudotas), Svoris: 120 kg Ilgis: 800 mm Plotis: 600 mm Aukštis: 330 mm Likutinės naujų ir naudotų frezų su anga, kotinių frezų, grąžtų, kaištinių grąžtų, keičiamos plokštelės bei įvairių kitų peilių atsargos. Iodoy Aa I Tjpfx Abvstg Gamintojai: Leitz, Leuco, Oppold ir kt. Įdomu kiekvienai gerai įrengtai galandinimo dirbtuvei.

Būklė: labai geros būklės (naudotas), Bendra galia 31,7 kW Pagrindinis variklis 7,5 kW Įėjimo plotis 550 mm Įėjimo aukštis apie 25/75 mm Ventiliatorius 22 kW / 10.800 m³/h Pramoninė smulkinimo arba trupinimo linija su kietmetalio peiliais, skirta įvairioms medžiagoms, tokioms kaip mediena, kartonas, stiklo pluošto kilimėliai ir pan., smulkinti, pavyzdžiui, pirminiam apdorojimui perdirbimo procesuose. Itodpfjyvvtrox Abvjg Įrenginį sudaro du padavimo transporteriai, smulkintuvas ir transportavimo ventiliatorius.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, spaudimo jėga: 80 t, DIXI 80 SLD horizontali presė Pusiau automatinė presavimo sistema su 80 tonų presavimo jėga, skirta ekonomiškai sumažinti pramoninių ir komercinių atliekų (perdirbamų) tūrį: Kartonas Tetrapakai Plėvelės Putų medžiagos PET buteliai Izoliacinės kilimėliai Itjdpjy Iykxsfx Abvog ir kitos presuojamos medžiagos. Presavimo jėga: 80 t Elektros jungtis: 400 V, 50 Hz; 11 kW; D-32 A (papildomai: K-32 A) Ciklo trukmė – vidutiniškai apie: 35 sek. Ilgis apie: 4 320 mm (be kėlimo įrenginio ir padėklo) Plotis apie: 1 830 mm Aukštis apie: 2 620 mm (su bunkeru) Įkrovimo anga (PxG) – korpusas: 1 040 x 1 110 mm Balo matmenys: 1 120 x 1 120 x 1 200 mm Balo svoris apie: 500–600 kg Rišimas: 4 kartus rankiniu būdu, viela su greitai atveriamomis kilpomis Mašinos svoris apie: 8 000 kg (be balo)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 40 t, balo svoris: 370 kg, HSM HL 4010 Re / Li horizontalus presavimo įrenginys su krepšelio verstuvu. Pagaminimo metai: 2015. Labai gera būklė – reguliariai prižiūrėta įgalioto techninės priežiūros centro. Paruošta darbui. Galima surišti viela, virve arba polipropileno juosta. Pusiau automatinė balų presavimo sistema su 40 tonų presavimo jėga – efektyviam pramoninių ir komercinių atliekų (perdirbamų medžiagų) tūrio sumažinimui: Kartonas Tetrapakai Plėvelės Putplastis PET buteliai Izoliacinės kilimėliai ir kitos presuojamos medžiagos. Iodpfxey Iyd So Abvetg Presavimo jėga: 400 kN Transportavimo plotis: 1,767 m Transportavimo aukštis: 2,489 m Transportavimo ilgis: 5,573 m Svoris: 4 500 kg Variklio galia: 7,5 kW Balių svoris (priklausomai nuo medžiagos): 300–350 kg Balos dydis (ilgis x plotis x aukštis): 750 x 1200 x 750

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2008, veikimo valandos: 8 200 h, Doppstadt DZ 750 Kombi - Pagaminimo metai 02/2008 - Pirminio trupintuvo volas su 21 dantimi - 2 x virš juostos magnetas - Centrinis tepimas - Nuotolinio valdymo pultas - Mercedes Benz variklis 480 kW (652 AG) prie 1 900 aps./min. - Svoris 46 000 kg - Pakartotinio trupinimo rotorius su 36 laisvai svyruojančiais kūjais - Sijojimo krepšys 120 mm (kiti krepšiai galimi) - Galinis transporterio juosta 7 m - Rotorius su 36 kūjais Mašina atnaujinta ir iš karto prieinama. Iodpfx Abjyxkwwsvetg

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 250 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, galia: 22 kW (29,91 AG), paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 530 m³/val, Technical Data Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Iedpfxjy R Npie Abvetg Number of bales produced: 198,059 pcs (as of April) Main press force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/h Throughput under working conditions: 260 m³/h Feed opening dimensions: 1,250 x 1,100 mm Chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm (variable length) Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: 6 to 7 t/h - 50 kg/m³: 7 to 9 t/h - 100 kg/m³: 11 to 14 t/h Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank volume: 600 L PLC: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press: approx. 16 t Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General Work: - Machine cleaned, derusted, primed, and partially painted - Wire ingress marks in the press channel welded and smoothed Hydraulic Unit: - Hydraulic oil tank drained, tank cleaned, filled with new oil - Oil and air filters replaced - Leaking oil sight glass on the tank replaced - All hydraulic hoses replaced Electrical System: - Program menu language set to English - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on control cabinet replaced - Flap limit switch replaced - Electrical system for the agitating device renewed, connected, and tested Press Ram: - All four press ram guide rollers removed and replaced - Main hydraulic cylinder dismantled, disassembled and partially overhauled (cylinder barrel honed, complete seal kit replaced, tightness test performed) - All plastic wear pads on the press ram replaced Pre-press Flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders dismantled, disassembled and partially overhauled (cylinder barrels honed, complete seal kits replaced, tightness test performed) - Scraper flap on the pre-press renewed Tying System: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on the twister unit below the twister fingers replaced Scope of delivery: Only the baler is being sold. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagram) is available. Inspection is possible by appointment. We do not assume liability for the technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 13 209 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 250 mm, pildymo angos ilgis: 1 050 mm, ryšulio plotis: 100 mm, ryšulio aukštis: 700 mm, balo svoris: 500 kg, bendras svoris: 8 500 kg, alyvos bako talpa: 400 l, galia: 15 kW (20,39 AG), paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 108 m³/val, Technical Data – Baler: Manufacturer (according to nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours, as of March 2026 Number of bales pressed: 23,379 pcs Pressing force: 50 t Specific pressing force: 650 kN/m² Feed opening dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total power consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 3.1 t/hour 60 kg/m³: approx. 4.5 t/hour 100 kg/m³: approx. 7.2 t/hour Bale weights at a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic tank capacity: 400 L PLC control: Siemens S7-200 Effective transport dimensions baler only: 6850 x 1950 x 2650 mm (L x W x H) Transport weight baler: 8.5 t Itsdpjy R Npcsfx Abveg Condition of the baler: The baler was in use at a production facility exclusively for compacting cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen relatively little use. The baler has been partially overhauled in our workshop and has undergone final testing. The following overhaul work was carried out: - Machine cleaned - Bale retainer checked for smooth operation and lubricated - Light barrier replaced - Twister unit completely dismantled, all bearings replaced, all plastic guides replaced, lubricated, and chain tension adjusted - Knife and counter-knife dismantled, sharpened, reassembled - Knife clearance reset - General maintenance performed and lubricated Scope of delivery: - 1 baler with wire spool boxes, without wire (6850 x 1950 x 2650 mm) - 1 bale chute (5100 x 1150 x 450 mm) - 1 wire spool box for floor mounting (1450 x 380 x 360 mm) To remove the baler, you will need a tautliner with an effective internal height of 2700 mm. Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is complete. Viewing by appointment is possible. We take no responsibility for technical data or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, veikimo valandos: 22 029 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 400 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 16 000 kg, galia: 75 kW (101,97 AG), paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 300 m³/val, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours (status: December 2025) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Itedpjy R Nnfefx Abvsg Bale dimensions: 1,100 x 750 mm (W x H), variable length Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (bulk density): - At 30 kg/m³: approx. 6.0 t/hour - At 50 kg/m³: approx. 10.5 t/hour - At 100 kg/m³: approx. 17.5 t/hour Bale weights, at a bale length of approx. 1.2 m: up to 600 kg (material dependent) PLC control: Siemens S7-300 Display panel: pulsotronic Installation dimensions (L x W x H): 8,610 x 2,400 x 3,835 mm Transport dimensions (L x W x H): 8,500 x 2,450 x 2,950 mm Transport weight: 16 t Special Equipment: - Wear-resistant floor made of HARDOX steel - Special pressing ram for compacting 'difficult' materials and loose bulk materials with small particle size - Control cabinet air conditioning - Machine base heightening, 200 mm Note: The machine has been serviced and partially overhauled in our workshop. Finally, the press was subjected to a machine test in both manual and automatic modes; see video for a demonstration of the machine’s functionality. Scope of delivery: - 1 Avermann baler, type AVOS 1410-45/80 (8,500 x 2,450 x 2,950 mm) - 1 pallet with safety grilles and small parts (1,400 x 600 x 1,250 mm) - 1 ground wire-pulling frame on double-T beams (1,900 x 1,750 x 2,550 mm) - 1 wire-pulling frame above the press channel (2,300 x 2,300 x 2,150 mm) - 1 pallet with 8 wire reel stands, without wire (1,300 x 850 x 1,000 mm) - 1 pallet with 4 wire redirecting units (2,200 x 800 x 380 mm) - 1 pallet with one bale chute (4,000 x 1,300 x 650 mm) - 2 bale guide plates (1,150 x 1,450 x 150 mm) For the transport of the machine with attachments, a Mega Liner with an effective internal height of 3,000 mm is required. Remarks: Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available.

Gamybos metai: 2013, veikimo valandos: 11 900 h, būklė: naudotas, Drum Screening Machine Manufacturer: Terra Select Model: T5 Year of manufacture: 2013 First registration: 04.12.2013 Operating hours (read): 11,899 h Attention: The machine has an engine fault! Fine fraction conveyor / cross conveyor as a single-piece belt, belt width 1,000mm - Oversize fraction conveyor, long version with 4,900mm discharge length, belt width 1,000mm - Infinitely variable speed control for the oversize fraction conveyor - Infinitely variable speed control for the fine fraction conveyor - Wiper for cleaning brush - Hydraulically foldable cleaning brush - Pivoting yard travel adapter - Two hydraulic support legs at the front Itjdpfx Aoy Taykebveg - One hydraulic support leg at the rear - 50mm towing eye - Lighting and brake system equipped according to EU regulations - Removable lines for brake and lighting - Adjustable inclination for oversize fraction conveyor - Infinitely variable speed control for the drum conveyor - Central lubrication points - Engine Perkins 3026/2200 - Screening drum Ø 20 mm Net purchase price: €42,500 plus statutory VAT VAT will be itemized separately on our invoice. Financing available We can arrange suitable financing upon request through our company. Feel free to contact us. Subject to alterations, errors, and prior sale. Sale is without warranty or guarantee and exclusively to commercial buyers. Inquiries are processed Monday to Friday, between 8 a.m. and 4 p.m.

Būklė: geras (naudotas), Gamybos metai: 2016, veikimo valandos: 1 060 h, Funkcionalumas: visiškai funkcionalus, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2016 Itedpfey Ni Shsx Abveg Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1,030 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Remark: The baler is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. The video can be found on our website or on our YouTube channel. The hydraulic hoses should be replaced. If you have any questions about the machine, we are happy to assist you by phone, Monday to Thursday between 8:00 a.m. and 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the correctness of these details or for possible errors. This offer is subject to change without notice, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale is subject to advance payment, ex works, without warranty or guarantee.

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Iedpfx Aey Ni Rdsbvjtg The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. If you have any questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer information. We accept no liability for the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewing is possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Būklė: geras (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Bale Press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2017 Motor power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, you can reach us from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not assume any liability for the stated details or possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Viewings are possible by arrangement. Sale is ex works, advance payment required, without warranty or guarantee. Isdpjy Ni I Asfx Abvotg

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Baling Press Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Manufacturer: Dixi Year of Manufacture: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Filling Opening: 990 x 1110 mm (W x L) Bale Dimensions: 1100 x 800 x 1200 mm Bale Weight: approx. 370-450 kg Tying: 3-fold manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Iedpfoy Ni Hxsx Abvotg We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer’s information. We do not accept liability for the provided details or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment ex works, without warranty or guarantee.

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Baler Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Manufacturer: Dixi Year of Manufacture: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Feed Opening: 990 x 1110 mm (W x L) Bale Dimensions: 1100 x 800 x 1200 mm Bale Weight: approx. 370-450 kg Tying: Manual, 3-fold Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Itedey Ni Hrepfx Abvjg Materials: Paper, Cardboard, Foil The press is in good, fully functional condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer’s specifications. We assume no liability for the information provided or for possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Viewing is possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Būklė: geras (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, Baling Press Dixi 60 SLD, Year of Manufacture 2015 Manufacturer: Dixi Model: Dixi 60 SLD Year of Manufacture: 2015 Drive Power: 7.5 kW, 400 V / 32 A Filling Opening: 990 x 1,110 mm (W x L) Pressing Force: 60 t Press Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Bale Weight: approx. 370–410 kg Tying: 3-fold, manual Itedpfx Aoy Ni Euebveg Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine Weight: approx. 5,420 kg Materials: Paper, Cardboard, Foil The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Operating manual and CE declaration are included. We will gladly answer any questions regarding the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. No liability is assumed for the information provided or for any errors. The offer is subject to change, prior sale reserved and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, sold as seen with no warranty or guarantee.