Panelių grąžinimas

MAHROS SPINNER

Būklė: nepatikrintas (naudotas), Gamybos metai: 2006, Funkcionalumas: nepatikrintas, X ašies eiga: 4 400 mm, Y ašies eiga: 1 300 mm, X ašies padavimo greitis: 40 m/min, Y ašies padavimo greitis: 45 m/min, Įranga: CE žymėjimas, The machine has the following configuration: Duedpfoyzy S Nsx Ac Der Drilling groups: Upper group with 30 vertical and 6 horizontal spindles Milling group 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling group 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, located at the rear of the machine Tool magazine 2: 6 positions, located on the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm X-axis rapid traverse: 40 m/min Y-axis rapid traverse: 45 m/min Z-axis rapid traverse: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Single vacuum pump capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with suction bars Number of suction bars: 8 Vacuum holding fixture for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8340

Būklė: nepatikrintas (naudotas), Gamybos metai: 2016, Funkcionalumas: nepatikrintas, briaunos storis (maks.): 22 mm, sukimosi greitis (maks.): 12 000 aps./min, Įranga: CE žymėjimas, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge edge strip magazine glue pot for EVA hot-melt adhesive premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Dsdpfxoyxndbo Ac Dour Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine trimming and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off saw unit RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 7673

Būklė: nepatikrintas (naudotas), Gamybos metai: 2006, Funkcionalumas: nepatikrintas, sukimosi greitis (maks.): 2 970 aps./min, ruošinio ilgis (maks.): 2 500 mm, ruošinio plotis (maks.): 1 000 mm, Įranga: CE žymėjimas, TECHNICAL DETAILS Max. panel width: 1,000 mm Max. panel length: 2,500 mm Min. panel length: 250 mm Min. panel width: 100 mm Number of vertical lower groups: 5 Number of vertical upper groups: 1 Lateral horizontal groups: yes Number of pressing elements: 5 Number of horizontal lateral groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS Control system: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups CNC positioning of groups CNC positioning of Z-axis Safety standards with CE marking Safety light curtains Automatic chip extraction Duedpoyzy T Tsfx Ac Der The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the place of destination. External reference: 6157

Būklė: nepatikrintas (naudotas), Gamybos metai: 2014, Funkcionalumas: nepatikrintas, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, X ašies padavimo greitis: 30 m/min, valdiklio modelis: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Unit Manufacturer Model: 08.379 Motor Power: 4 kW Speed: 8,800 rpm Unit: Cross-cutting Unit Manufacturer Model: 08.42 / 30 / B Number of Motors: 2 Motor Power: 0.660 kW Unit: Corner Milling Unit Manufacturer Model: 08.055 Number of Motors: 2 Motor Power: 1.850 kW Speed: 12,000 rpm Unit: Rounding Unit Manufacturer Model: SKF-L Number of Motors: 4 Max. Processing Speed: 20 m/min Motor Power: 0.180 kW Speed: 12,000 rpm Unit: Edge Scraper Manufacturer Model: 08.519 Unit: Glue Scraper Manufacturer Model: 08.521 Unit: Brushes Manufacturer Model: 08.617-2 Number of Motors: 2 Motor Power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Dujdpoyzy Iwjfx Ac Dsr Min. Panel Height: 8 mm Max. Panel Height: 60 mm Min. Panel Length: 150 mm Min. Panel Width: 65 mm Min. Edge Thickness: 0.3 mm Max. Edge Thickness: 20 mm Max. Feed Speed: 30 m/min MACHINE DETAILS Control System: ICOS OPEN EQUIPMENT Magazine for roll material Tank for hot-melt adhesive Pressure roller unit for the edge Pressure applied via rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial descriptions of an informative nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6089

Būklė: nepatikrintas (naudotas), Gamybos metai: 2012, Funkcionalumas: nepatikrintas, pjovimo plotis (maks.): 4 500 mm, X ašies padavimo greitis: 140 m/min, dalies ilgis (maks.): 2 200 mm, Įranga: CE žymėjimas, dozatorius, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum tool diameter (saw unit): 380 mm Maximum tool diameter (scoring unit): 200 mm Saw blade projection: 95 mm Number of rip saw grippers: 5 Number of crosscut saw grippers: 8+4 Maximum feed speed: 140 m/min Dedpfx Asyxn Adsc Djur Connected load saw unit 1: 15 kW Connected load saw unit 2: 15 kW Connected load scoring unit 1: 2.2 kW Connected load scoring unit 2: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT - Second flexible pusher system - Quick-change system for saw blades - Label printer for barcode - CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the place of destination. External reference: 5711

Būklė: naudotas, mašinos/transporto priemonės numeris: 007234, Max. panel width: 900 mm Max. panel length: 1200 mm Conveyor length: 8000 mm Duedpfswlpnnjx Ac Dor Separator return for edge banding machine: left

Gamybos metai: 2007, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, ruošinio ilgis (maks.): 2 000 mm, ruošinio plotis (maks.): 800 mm, konvejerio juostos ilgis: 5 700 mm, Įranga: CE žymėjimas, Nėra minimalios kainos – garantuotas pardavimas aukščiausią pasiūlymą pateikusiam! TECHNINIAI DUOMENYS Maks. ruošinio plotis: 800 mm Min. ruošinio ilgis: 140 mm Maks. ruošinio ilgis: 2.000 mm Djdoxxafbjpfx Ac Dour Transporterio ilgis: 5.700 mm STAKLIŲ DUOMENYS Išmatavimai (I x P): 5.700 x 1.000 mm ĮRANGA Detalių grąžinimas kampų klijavimo staklėms kairėje Plokštės išmetimas ant stalo su oro užuolaida Plokštės padavimas varomu kilimu CE ženklinimas