Elektros variklis

Z-Band/belt

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Ram reinforcement: 100 mm Table size: 850 x 810 mm Pass-through opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guidance - Hydraulic overload protection Gsdpfsgpxc Ssx Abdsbg - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Sąlyga: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: A-07/471A, Sheet width - max.: 130 mm Straightening roll diameter: 40 mm Number of straightening rolls: 5 Draw rolls: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Gbjdocxxx Rspfx Abdsg Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated steplessly adjustable VARI drive, forward and reverse operation, mode selector switch for manual and automatic, entry roller basket, position display for straightening rolls via analog display, adjustment of straightening roll positions via handwheels, automatic loop control, very good condition

Gamybos metai: 1971, Sąlyga: geras (naudotas), Decoiler – Expanding Mandrel Decoiler with Coil Lifting Table Gjdpfxod Ha E So Abdebg Strip Width: 1,200 mm Strip Thickness: 0.3 – 5 mm Coil Weight: 10 t Mandrel Ø: 508 mm

Sąlyga: naudotas, Eccentric Punching Press HAULICK + ROOS Type RVD 125 Double Column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Gbodpfx Aohlnzkebdjg Column gap: 900 mm Side column spacing: 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Shut height as shown: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double connecting rod drive with 4-point eccentric shaft bearing for off-center ram force absorption - Free-standing electrical cabinet - NC roller feeder EBU, width 250 mm, year 2003 - Separate control panel for roller feed unit - Coil direction from left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Gamybos metai: 2003, Sąlyga: naudotas, Pressure 100 t Stroke 10–130 mm Strokes per minute 30–90 spm Throat depth 330 mm Ram adjustment 100 mm Table surface 950 x 660 mm Ram surface 540 x 440 mm Table pass-through opening Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Press control Beutler Datatech Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation GSW straightening and feeding machine VRMA 40/78, year 2003 Godpfxjra Rr Eo Abdsbg Feed control HDS 50 BSA decoiler NO20/400V-AP

Gamybos metai: 1980, Sąlyga: naudotas, Pressure: 80 t Outreach: – mm Stroke: 50 mm Table surface: 875 x 695 mm Ram surface: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 – 90 Gap width: 450 mm Machine weight approx. 6.2 t Gedpfxsdlcy Ho Abdjbg Space requirement approx. 2.0 x 2.1 x 3.2 m Installation height (stroke down, ram adjustment up): 480 mm Further information: - The machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate free-standing control cabinet with touchscreen, including wiring * New paintwork of individual components in disassembled state After the partial overhaul, the machine is safe for manual loading operation at open tools. Before delivery, a current UVV safety inspection and brake time measurement will be carried out.

Sąlyga: naudotas, Double Column Eccentric Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feed Machine No. 88151005 Year of manufacture: 1988 / 92 Pressing force: 160 tons Column spacing: 970 mm Side column spacing: 560 mm Table size: 900 x 900 mm Ram area: 900 x 700 mm Tool installation height: 560 mm, max. 700 mm Stroke adjustment: 8–160 mm Ram adjustment travel: 125 mm Strokes per minute: 25 to 70 spm Strip width in roller feed: max. 400 mm Motor power: approx. 15 kW Power supply: 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided ram with oil-lubricated guides - UNIDOR press control system - Swiveling control panel - Control cabinets for press and feed, mounted together on a platform beside the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Width of press without feed: 2100 mm Depth of press with drive motor: 2300 mm Overall height of press: 4150 mm Net weight of punch press: approx. 18 tons For transport, the drive motor is removed and the machine is laid down. Included: NC roller feed/straightening machine ALBA type GGVHY400 Unit No. 1405 and 1406, Order No. 910708 (Year of manufacture: 1992) - ALBA PSS 300 feed controller - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive for feed hydraulically controlled - Height-adjustable feed assembly mounted to the press for adapting entry height Gbodsdzqlvepfx Abdog - Hydraulic unit beside the machine - Pull-through straightener with hydraulic opening and closing Total system weight: approx. 24 tons Transport space required: one mega trailer with 3 m internal height and 13.6 m loading length Good condition

Sąlyga: geras (naudotas), Driven and non-driven roller conveyor SSI Schäfer • Partial accumulation roller conveyors • Various lengths available, adaptable to your individual warehouse project • Clear width: approx. 460 mm • Merging and diverging units available Gbedegpw Rnspfx Abdsg • Roller conveyor curves available Very well-maintained driven and non-driven roller conveyors available in large quantities. For more information, please refer to the attached images. The drawings show the current assembly status, but this can of course be modified as required. We are happy to assist you with transport! Payment exclusively via: • Bank transfer • Advance payment All prices are net (plus VAT). You will of course receive an invoice with VAT shown separately. Please also check out our other listings. Didn’t find what you were looking for? Don’t hesitate to contact us.

Sąlyga: naudotas, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 16 bar operating pressure Max. 110 degrees Celsius Gbedpfjuif Iusx Abdog 60 m³/hour 20.2 m head n = 2900 rpm This offer is directed exclusively at commercial customers as defined by §14 BGB. No sale to private individuals.

Sąlyga: naudotas, Gamybos metai: 2017, Overview The wrapper was manufactured in 2017 by the Spanish company Movitec. It will remain in operation until the end of September 2023 and can be inspected at any time. Godpfxel Uyfko Abdsbg Technical Data - Max. 120 pallets/hour (with 10 wraps) - Dimensions (LxWxH): 5,240 mm x 3,825 mm x 4,184 mm - Weight: 2,000 kg - Film width: 500 mm - Main frame constructed from steel - Rotary ring with unwind unit for pre-stretch film - Motorized pre-stretching system - Cutting and sealing system Scope of Delivery - Safety fence - Wrapper | Movitec | Saturn S6 | 2017 - Compressor | Josval | EDS-900 | 2016