Apvalių vamzdžių, stačiakampių vamzdžių gręžimo staklės
UniBohrFix 50

Gamybos metai

2024

Sąlyga

Naujas

Vieta

Bopfingen

Apvalių vamzdžių, stačiakampių vamzdžių gręžimo staklės UniBohrFix 50

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Apvalių vamzdžių, stačiakampių vamzdžių gręžimo staklės

Modelis:: UniBohrFix 50

Gamybos metai:: 2024

Sąlyga:: naujas

Kaina ir vieta

Vieta:: Gewerbehof 27, 73441 Bopfingen, Deutschland

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A5849001

Naujinta paskutinį kartą:: Data 2024.09.26

Aprašymas

SEMI-AUTOMATIC DRILLING SYSTEM “UNIBOHRFIX 50”

With the UniBohrFix 50 drilling system, all profiles can be processed either against a stop or using the gripper clamp. Drilling is performed manually via a lever, while materials are automatically positioned to the next drilling location along the X-axis. Conveniently execute entire drilling programs, or use the stop plate for rapid single hole operations. The system is suitable for weights up to 100 kg. Additionally, the unit includes a minimum quantity spray unit with holder and spray can.

For technical specifications of the standard version, refer to the table. All system components can be configured to your requirements. You may choose from various drill units, roller conveyors, positioning systems, and vices.
Plantec configures the system to fit your needs perfectly!

ADVANTAGES
- Series of holes are drilled at precise intervals automatically.
- Operating errors are drastically reduced.
- Programming takes only a few minutes.
- Excellent price-performance ratio.
- Significant reduction in required labor.

Standard measuring lengths:
3,000 mm
6,000 mm
Drill unit: Unimax 2 T
Spindle: MK2
Continuous drilling capacity: 18 mm
Speed ranges:
100-2000 rpm, 200-4000 rpm
Throat depth: 225 mm
Distance spindle/table: 60-400 mm
Adjustable vice with linear measurement readout
Positioning length stop: PD-100e
Control for automatic positioning
Positioning: absolute or incremental
Easily readable LED display
Carriage with DC servo motor
Positioning accuracy: +/- 0.1 mm/m
Stop arm with spring dampening
Stop plate with groove
Programmable controller with 3,000 memory slots
Roller conveyors: RD-200/3
Load capacity: 200 kg/m
Roller width: 290 mm
Roller diameter: 40 / 50 mm
Insert plates
Bracing for stabilization
Control cabinet

Available options:
Knjdpsgwt Sljfx Ag Asd
- Minimum quantity spray system with spray head and holder
- Gripper clamp for securing material to the stop plate

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Registruota nuo: 2017

44 Skelbimai internetu

Skambinti

Pateikti užklausą

Pranešimas*

Pavadinimas*

El. paštas:*

Telefonas

Bendrovė

Pašto kodas ir miestasžemė

Esu prekybos agentas

Gaukite pasiūlymus dėl panašių mašinų

Pastaba: Jūsų užklausa bus perduota visiems šios mašinų kategorijos pardavėjams. Dėl to galite gauti labai daug pasiūlymų.

Privatumo pareiškimas

Telefonas & Faksas

+49 7362 ... skelbimai

Pridėti prie stebėjimo sąrašo

Dalintis Pranešti apie skelbimą

Šie skelbimai taip pat gali jus sudominti.

mažas skelbimas

Džiginio gręžimo staklės HMB PBM 1000/60

Niederlangen

1 113 km

Džiginio gręžimo staklės
HMBPBM 1000/60

Skambinti

Sąlyga: naudotas, Gamybos metai: 1996, Spindle diameter: 60 mm X-axis travel max.: 1000 mm – min.: 100 mm Y-axis travel max.: 1000 mm – min.: 100 mm Knedpfegvkkzsx Ag Aod Maximum drilling capacity in steel: 40 mm Maximum tapping capacity: M24 Material thickness max.: 60 mm – min.: 5 mm Spindle speeds – infinitely variable: 1 – 1,000 rpm Feed rate, infinitely adjustable, rapid traverse: 1 – mm/min Feed rate, infinitely adjustable, working feed: mm/min Feed force: 16 kN Tool taper: SK 40 Spindle stroke: 600 mm Positioning speed on all axes: 1 – 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Maximum table load: 500 kg Working height: 1,000 mm Machine weight approx.: 4.8 t Space requirement approx.: 3.5 x 3.3 x 3.1 m Control: Bosch CNC plate drilling system HMB PBM1000/60 – W12 for drilling end plates and base plates in steel construction, equipped with tool changer (12 positions) Number of drilling spindles: 1 pc. Operating voltage: 220/380 V Frequency: 50 Hz Total connected load: 22 kVA

Peržiūrėti detales

mažas skelbimas

Miltelinio dažymo įrenginys MEEH Jumbo-Coat

Vokietija

999 km

Miltelinio dažymo įrenginys
MEEHJumbo-Coat

Skambinti

Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), A complete large-part powder coating system from MEEH, including powder coating and dust filtration units, is available. Product dimensions (X/Y/Z): 8000mm/800mm/3000mm, max. product weight: 1000kg, total opening area: 12.9m², max. permitted powder spray rate: 90kg/h, extraction capacity: 18,000m³/h, overall system dimensions (X/Y/Z): approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8 bar, connected load: approx. 30kW. 1) Manual powder booth with extraction, internal dimensions (X/Y/Z): 10m/3m/4m, external dimensions (X/Y/Z): 10040mm/3370mm/4600mm. Knodpfx Agowr Dv Hj Aod 2) Chamber oven MEEH KTÖ240, year of manufacture: 2008, air capacity: 30,000m³/h, heat output: 240kW, burner: Weishaupt, burner year: 2019, fuel: heating oil, oven internal dimensions (X/Y/Z): approx. 8530mm/4610mm/5840mm, oven external dimensions (X/Y/Z): approx. 8200mm/3500mm/4000mm. 3) Lift-and-lower station with 2 chain hoists H/S 160, year: 2008, speed: 4m/min, max. load capacity: 2x500kg, distance from bottom edge of crossbeam to floor: approx. 3700mm. 4) Electric traverse platform EQ 160, year: 2008, max. load capacity: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse positions: 14, traverse length: 8m, load capacity per traverse: 1000kg. Documentation is available. On-site inspection possible.

Peržiūrėti detales

mažas skelbimas

Köln

1 222 km

Gręžimo įrenginys
FicepDZ 603

Skambinti

Gamybos metai: 2004, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 0201-220031, FICEP DZ 603 Drilling Line for Structural Profiles The Ficep DZ 603 is a drilling line featuring three drilling axes for the processing of structural profiles. This 3-axis drilling line is designed for beam processing in steel construction. Steel profiles can automatically be drilled and center-punched along three axes (flange and web). The Mitrol CNC control with Arianna software enables the programming of the drilling line. CAD data in DSTV or DXF format is converted into NC data by the CNC control, and the machine initiates the program, positioning the axes as specified. A gripper-type measuring carriage positions the profile at the correct drilling position within the drilling unit. A 5-position automatic tool changer provides rapid drill bit changes on each drilling axis. An infeed and outfeed roller conveyor ensures stable transport of the steel profiles. Technical Specifications - Ficep DZ 603 Drilling Line: - Max. beam height: 610 mm - Max. flange width: 450 mm Knodpsrr Tauefx Ag Ajd - Max. processing length: 11,300 mm - CNC Control: Mitrol ARIANNA - 3 drilling spindles suitable for HSS coolant channel drills - Spindle speed: 180 – 1,000 RPM - Drilling diameter: min. ø 8 mm – max. ø 40 mm - Drilling spindle power: 7.5 kW each The DZ603 drilling line is sold without a marking unit.

Peržiūrėti detales

mažas skelbimas

Greitaeigis radialinis grąžtas Donau DR 32

Eisenberg (Pfalz)

1 239 km

Greitaeigis radialinis grąžtas
DonauDR 32

Skambinti

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Knjdorn Riqopfx Ag Aod Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Peržiūrėti detales

mažas skelbimas

Hidraulinis CNC presas 4100x450tn Axial PHSW-454

Balaguer

2 244 km

Hidraulinis CNC presas 4100x450tn
AxialPHSW-454

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 2004, bendras svoris: 40 000 kg, spaudimo jėga: 450 t, AXIAL 4100x450t + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA CNC crowning table + WILA hydraulic punch and die clamping Bending length: 4,100 mm Pressing force: 450 t Stroke: 365 mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z axis (supports with double prismatic guide) Kedpfx Aju Au U Tjg Aond WILA hydraulic punch and die clamping system WILA CNC crowning table Operating speeds: Approach speed: 110 mm/sec Working speed: 8 mm/sec Return speed: 90 mm/sec Distance between uprights: 3,600 mm Throat depth: 410 mm Opening between table and ram: 500 mm Pit penetration: 975 mm CNC: Cybelec ModEva 10 (New control CPU from September 2023) Safety laser: DSP LASER - TX Weight: 40 t Motor power: 30 kW

Peržiūrėti detales

mažas skelbimas

Velen

1 176 km

Suvirinimo diskas
WMTHD 50

Skambinti

Sąlyga: naujas, Table diameter 315 mm Table load capacity horizontal 50 kg Table load capacity vertical 25 kg Chuck diameter 200 mm Speed 0 - 5 rpm stepless Swivel range 90 degrees Tilt adjustment: manual/motorized manual Supply voltage 230 V Machine weight approx. 45 kg Space requirement approx. 800 x 600 x 600 mm Welding positioner with: - Integrated stand and universal torch holder Knjdpfji Hg I Dox Ag Aod - Quick-release chuck 200mm - Foot switch - Manual tilting/swiveling - Steplessly adjustable speed

Peržiūrėti detales

mažas skelbimas

Odder

867 km

Dyzeliniai krautuvai
TCMFD80

Skambinti

Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 2852, Gamybos metai: 2006, keliamoji galia: 8 000 kg, kėlimo aukštis: 5 000 mm, stiebo tipas: dupleksas, šakių laikiklio plotis: 150 mm, šakių ilgis: 1 600 mm, bendras ilgis: 4 120 mm, bendras plotis: 2 220 mm, papildomos įrangos savybės: Dual tread, Weight system, Fire extinguisher, Įranga: apšvietimas, TCM FD80 iš Uniktruck Kjdpfork Rd Nox Ag Aond

Peržiūrėti detales

mažas skelbimas

Universalus frezavimo ir gręžimo įrenginys DECKEL FP1 3-Achsen aktiv 2102 - Teilüberholt

Ubstadt-Weiher

1 232 km

Universalus frezavimo ir gręžimo įrenginys
DECKELFP1 3-Achsen aktiv 2102 - Teilüberholt

21 500 €

Pradinė kaina neįskaitant PVM

Skambinti

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, We are offering for sale a partially overhauled Deckel FP1 with a 3-axis TNC113 active control, which stands out for its particularly user-friendly operation. This newer version from the year 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition, which you are welcome to inspect on-site. As part of the partial overhaul, the following work, among others, was carried out: - Spindle bearings of the milling head replaced - Repainting - Various standard parts such as handles, oil sight glasses, buttons, etc. replaced - Wear parts such as drive belts, etc. replaced - Some bellows replaced - Gib strips adjusted - and much more… Delivery time: immediately Year of manufacture: 1989 Machine no.: 2102-xxxx Table: fixed angle table Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5-500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: coolant system, central lubrication, manual, machine mounts Knodpfx Agspy Elds Ajd Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can overhaul your chosen machine either completely or partially - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation

Peržiūrėti detales

mažas skelbimas

Staklės - Vertikaliosios gręžimo staklės SIP MP - 53

Metzingen

1 242 km

Staklės - Vertikaliosios gręžimo staklės
SIPMP - 53

Skambinti

Gamybos metai: 1985, Sąlyga: naudotas, Spindle diameter: 110 mm X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 200 mm Table length: 1,020 mm Table width: 860 mm Taper: MK 40 Table size approx.: 1,020 x 860 mm Table load capacity approx.: 800 kg Max. longitudinal table travel (X): 900 mm Max. cross travel of drilling head (Y): 600 mm Max. quill travel (Z): 200 mm Max. vertical adjustment of cross beam (W): 635 mm Vertical clearance table/drilling spindle max.: 15 – 850 mm Distance between uprights: 950 mm Spindle diameter: 110 mm Internal/external spindle taper: ISO 40 18 spindle speeds: 10 – 2,500 rpm Continuously variable milling feed (table): 1 – 6,000 mm/min 4 milling feeds (drilling head): 30 – 180 mm/min 6 drilling feeds: 0.01 – 0.39 mm/rev Positional accuracy for all 3 axes (as new): 0.003 mm Rapid traverse table/drilling head/cross beam: 6,000 mm/min Kodpfx Aget Hwyxe Aend Spindle drive power: 6.2 kW Total drive power approx.: 15 kW – 380 V – 50 Hz Machine weight approx.: 9,000 kg Accessories / Special equipment: - 3-axis CNC control BOSCH MICRO 8 with monitor, program input manually, via cassette, and through interface - Digital display for Z-axis - Separate control cabinet, various tools - Oil cooler for spindle lubrication, etc.

Peržiūrėti detales

mažas skelbimas

Hidraulinė perforavimo mašina BOSCHERT Ecco Line EL 500 Digital

Balaguer

2 244 km

Hidraulinė perforavimo mašina
BOSCHERTEcco Line EL 500 Digital

Skambinti

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Hydraulic Punching Machine Brand: Boschert Model: Ecco Line EL 500 Digital Specifications: Punching force: 28 t Working table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Connected load: 5 kW Ksdpfxsrn Swkj Ag Ajnd Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons EL-500-Digital punch dimensions (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 drawers for tools Foot pedal Includes all accessories shown in the photos.

Peržiūrėti detales

Reklamuokite čia