Šildymo ir džiovinimo krosnelė TRW, II modelis

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Dusdpfx Ajtyyn Hob Sol Documentation available. Inspection on site is possible.

Gamybos metai: 2017, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Wiesheu EBO 60x80 combi-oven, bouwjaar 2017 - Euromat 64 L 2600-A-FBBBCBAA Duodpjp Sr N Rofx Ab Ssl - Ebo 68 M X1625-A-BBADA

Sąlyga: naudotas, Gamybos metai: 1988, veikimo valandos: 30 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20992, Sehr geehrte Damen und Herren, wir können Ihnen den IPSEN VTTC-324 aus dem Baujahr 1988 anbieten. Technische Daten des Vakuumofens: Dedpfx Aewah R Rob Seul - Anschlussleistung: 165 kVA - Netzspannung: 400 V, 50 Hz - Nennstrom: 240 A - Nutzbare Kammerabmessungen: 450 mm x 600 mm x 900 mm - Heizleistung: 120 kW - Heizspannung: 43 V, 50 Hz - Heizstrom: 1.613 A - Temperaturbereich: 350 - 1.320 °C - Absolutes Vakuum: 1 x 10⁻⁵ mbar (Diffusionspumpe) - Absoluter Druck: 5 bar Zum Lieferumfang gehören außerdem zahlreiche Ersatzteile und Ausrüstungen für den thermischen Behandlungsprozess (z. B. Gastank, Heizungen, zahlreiche Steuerungen, Ladegeräte und weiteres Zubehör). Für weitere Informationen stehe ich Ihnen gerne zur Verfügung.

Gamybos metai: 2020, Sąlyga: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. Dodpfjflk Awsx Ab Seul 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2010, Sąlyga: labai geros būklės (naudotas), Kammer innen: 2000 x 1250 x 1250 mm Innenvolumen: 2344 Liter Bis zu 400 °C (Leistung 33 kW) Vorheizen / Trocknen für manuelle, zyklische und CNC-Bearbeitung bis hin zur interaktiven Konturenprogrammierung. Abgedeckte Führungsbahnen (DGP) für hohe Langzeitpräzision. Direktantrieb vom Motor zur Hauptspindel für ruhigen Lauf. Umlaufschmiereinheit mit Filterung zur Schmierung des Präzisionshauptspindellagers. Kombinierte Steuereinheit für wirtschaftlich vorteilhafte Programmierung und Maschinenbedienung sowie optimalen Zugang zum Arbeitsbereich. Dsdpfx Aeuqkwfeb Seul Länge: 2500 mm Breite: 2015 mm Höhe: 2900 mm Gewicht: 4000 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, equipped with 3-axis Heidenhain ND 780 digital readout. Like new condition! Technical data: Dsdpfxovbifge Ab Ssul - Machine No.: 2202-7020, FPS No.: 3364, year of manufacture 2013 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed and rapid traverse on 3 axes - Motor power: 2.2 kW - Travel X/Y/Z: 400/200/400 mm - Equipment: vertical & horizontal spindle - Vertically and horizontally extendable quill – SK-40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and configuration: - 3-axis Heidenhain ND 780 digital readout - Brake motor with instant spindle stop - Centralized lubrication system - 2x emergency stop buttons - Operating manual - Coolant system About the machine: For sale is a Universal Milling Machine Deckel FP2 repowered by FPS, in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop and an electric central lubrication system. For safety, it features two emergency stop switches (as of 2013). Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Sąlyga: naudotas, Gamybos metai: 1986, The Steriflow Barriquand 1351 Autoclave is an essential solution for sterilization and pasteurization in industrial environments. With its use of superheated water, it guarantees maximum efficiency in preserving your food and pharmaceutical products. This model, manufactured in 1986, remains in excellent working condition and continues to meet the high standards of modern production. Additionally, this autoclave is equipped with six baskets, enabling high-capacity processing. As such, it is ideal for large-scale production requirements, while offering outstanding optimization of energy consumption. Moreover, its type B circuit ensures reliable performance and uniformity in product treatment. Djdpfxsu Dimye Ab Sjul Furthermore, Steriflow—a manufacturer recognized for its professional equipment—designed this autoclave to offer not only exceptional durability but also flexibility suited to various processes. To see how the Steriflow Barriquand 1351 Autoclave can enhance your operations, visit our website. There you will find detailed information about its benefits and operation.

Sąlyga: geras (naudotas), JBT FMC Foodtech Autoklav / Retorte in gutem Zustand mit modernisierter Steuerung. Direkt von einem europäischen Pastetenhersteller übernommen. Einzeltür, 1,4 m Durchmesser, Kapazität für 6 Wagen. Wir haben außerdem zwei A144-Modelle mit 4-Wagen-Kapazität aus derselben Fabrik verfügbar. Dusdpsrzbfcjfx Ab Sel

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1976, Universal milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months, single-shift operation from delivery, covering the mechanics overhauled by us. Electrical and electronic systems are excluded from the warranty, as they have only been function-tested. For machines located outside our North Bavarian sales region, travel costs are to be borne by the customer. Dsdpfsmhfrrjx Ab Ssul Geometric inspection with inspection protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, as inspected Technically, the machine corresponds to the state of the art at the time of manufacture.

Sąlyga: labai geros būklės (naudotas), Glasbeek Finish Gas Powder Wall Chamber Furnace 250°C Glasbeek Finish Gas Powder Wall Chamber Furnace Maximum temperature: 250°C Electrical connection: 8 kW 51 kW 3x400V Duodpod Szzgjfx Ab Sol Year of manufacture: 2003 Approximate internal dimensions: W 120 cm x D 300 cm x H 139 cm with loading trolley (L 280 x W 102 cm) Approximate external dimensions (LxWxH): approx. 380 x 220 x 305 cm Transport available on request. You can find more new and used items in our shop! International shipping costs on request!