Skystųjų trąšų rezervuaras 50 m³

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 160378, veleno skylė: 40 mm, centro aukštis: 160 mm, plotis centre: 750 mm, veleno greitis (maks.): 3 000 aps./min, ruošinio skersmuo (maks.): 375 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the set deadlines, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Centre height: 160 mm Centre distance: 750 mm Maximum workpiece diameter over bed: 375 mm Maximum workpiece diameter over cross slide: 180 mm Spindle speeds: 38 to 3,000 rpm Spindle taper: Morse 5 Spindle bore: 40 mm Collet capacity: 24 mm Longitudinal and cross fine feeds: 0.015 to 0.21 mm/rev Ksdpfxsym Nkko Aauslr Longitudinal and cross feeds: 0.025 to 0.35 mm/rev Cross slide travel along the bed: 750 mm Top slide travel: 120 mm Cross slide travel: 215 mm Centre height above tool slide: 32 mm Tool section: 20 x 20 mm Tailstock quill taper: Morse 3 Quill stroke: 120 mm Lateral adjustment: +/- 10 mm MACHINE DETAILS Operating voltage: 380 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,000 x 1,500 mm Weight: 2,500 kg EQUIPMENT Includes documentation Matching workshop cabinet including accessories External reference: Showroom

Gamybos metai: 2004, būklė: naudotas, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the German Water Resources Act (WHG) Dear Sir or Madam, We are offering a double-walled storage tank with a capacity of 50,000 liters for the storage of liquid fertilizers, with the following specifications: The storage tank is equipped with a brand new factory-installed inner lining made of plastic, which is resistant and suitable for the storage of liquid fertilizers. An acoustic leak detection device is installed outside in a lockable protective box. Additionally, the storage tank is double-walled and made of steel. The plastic inner lining has a general building authority approval and is therefore suitable and approved for the storage of liquid fertilizer (AHL) as well as NOX reduction agents AUS32 (AdBlue). Specifications: - Nominal capacity: 50 m³ - Quantity: 1 - Condition: used but fully refurbished; this means the tank is cleaned, reconditioned, primed, and painted - Color: according to RAL; you are welcome to specify your preferred color - Material: double-walled steel, material grade S235JRG2 - Documentation: manufacturer’s certificate/test certificate according to DIN 6616 D/2 and type plate - 1 unit: dipstick - 1 unit: venting nozzle - 1 unit: 3-inch stainless steel (V2A) filling nozzle, newly installed - 1 unit: new acoustic leak detector for double-wall monitoring - 1 unit: ladder - 1 unit: 3-inch stainless steel (V2A) suction line, newly installed - Design: cylindrical storage vessel with feet/console Tank dimensions: - Length: approx. 10,900 mm - Diameter: approx. 2,500 mm - Weight: approx. 9,000 kg - For above-ground installation Excellent offer: Liquid fertilizer – AHL tank systems available from 5,000 to 100,000 liters. Water tanks and fire water tanks also available. Of course, you can also contribute to the design of your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. Upon request, we can also offer affordable delivery. You are welcome to inspect our systems at any time. Additional tank systems for above-ground or underground storage are available in all sizes and can be viewed for sale on our premises. Klsdpfjc Nk Ensx Aauer Have we convinced you with our offer? If you have any questions or requests, please feel free to call us—one of our experienced staff members will be happy to advise you. Price/Shipping The price applies ex works Warstein, loaded free of charge onto your truck. Delivery can be offered at a competitive surcharge. Delivery time: immediate. You will receive an invoice with VAT shown separately. Furthermore, we purchase existing tank systems and, as an approved specialist company under the German Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them away. Kind regards from Warstein, Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 600 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 780 mm, valdiklio modelis: HEIDENHAIN TNC 426, veleno greitis (maks.): 2 500 aps./min, TECHNINĖS DETALĖS X ašies eiga: 1 600 mm Kjdpoyztl Nefx Aauolr Y ašies eiga: 1 000 mm Z ašies eiga: 780 mm Apdirbimo ašių skaičius (be lygiagrečių ašių): 5 Stalas Tvirtinimo paviršius (kairė-dešinė): 1 000 mm Tvirtinimo paviršius (priekinė-galinė): 1 000 mm Ruininio svoris (maks.): 6 000 kg Sukamosios ašies tipas: C > Padėties nustatymas 0,001° Frezavimo galvutė / velenas Veleno tipas: pasukama galvutė > Padėties nustatymas 2,5° Sūkių diapazonas: iki 2 500 aps./min Įrankių tvirtinimas: ISO SK 50 Variklio galia: 22 kW Įrankių keitimo magazinas Įrankių pozicijų skaičius: 60 Ruininio automatika Sandėliavimo vietų skaičius: 2 Padėklų ilgis: 1 000 mm Padėklų plotis: 1 000 mm Padėklų skaičius: 2 STAKLIŲ DUOMENYS Valdymas: HEIDENHAIN TNC 426 Matmenys ir svoriai Užimama vieta (kairė/dešinė): 6 400 mm Užimama vieta (priekinė/galinė): 6 900 mm Bendras aukštis: 4 000 mm Bendras svoris: apie 26 000 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 565 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 415 mm, ruošinio svoris (maks.): 1 000 kg, stalo plotis: 600 mm, stalo ilgis: 840 mm, TECHNINĖS DETALĖS Stalo dydis: 840 x 600 mm Dielektriko aukštis virš stalo: 360 mm Maksimalus ruošinio svoris: 1 000 kg T formos grioveliai: 4 x 10 mm Atstumas nuo stalo iki galvos be tvirtinimo: maks. 595 mm Atstumas nuo stalo iki galvos be tvirtinimo: min. 180 mm X ašies eiga: 565 mm Y ašies eiga: 400 mm Z ašies eiga: 415 mm X-Y-Z skiriamoji geba: 0,001 mm C ašies skiriamoji geba: 0,001 Greitasis eigos greitis: 800 mm/min Maks. elektrodų svoris be rotacijos: 100 kg Maks. elektrodų svoris su rotacija: 15 kg MAŠINOS DUOMENYS Išmatavimai ir svoris Matmenys (A x P x G): 2760 x 1110 x 1840 mm Svoris: 2 750 kg Dielektriko tiekimas Bako talpa: 400 l Popierinių kasetinių filtrų kiekis: 4 vnt. Generatorius Išmatavimai (A x P x G): 1800 x 600 x 920 mm Kljdpfx Aoyzn Rysausr Svoris: 300 kg Nominali srovė: 60 - 120 A Maitinimo galia: 15 - 23 kVA

Gamybos metai: 2000, būklė: geras (naudotas), Tank & Environmental Protection Wozniack – Certified Specialist Company in accordance with the German Water Resources Act (WHG) Dear Sir or Madam, We are offering a 30,000-liter double-walled storage tank for the storage of liquid fertilizer as follows: The storage tank is equipped internally with a factory-new plastic inner lining, which is resistant and suitable for storing liquid fertilizers. An acoustic leak detection device is mounted externally in a lockable protective housing. The storage tank is also double-walled, made entirely of steel. The plastic inner lining has a general building authority approval and is thus suitable and approved for storing liquid fertilizer (AHL) as well as NOX reduction agents like AUS32/AdBlue. Technical Data: - Nominal capacity: 30 m³ - Quantity: 1 - Condition: Used but completely overhauled, cleaned, newly refurbished, primed, and painted - Color: Paint RAL; your own paint preferences can also be accommodated - Material: Steel-in-steel, material S235JRG2 - Documentation: Manufacturer’s certificate/inspection certificate according to DIN 6616 D/2 and type plate Kjdpfoc Nk Dyjx Aauelr - Accessories: - 1 dipstick - 1 vent nozzle - 1 fill nozzle 3" V2A stainless steel (newly installed) - 1 new acoustic leak detector for double-wall monitoring - 1 ladder - 1 suction line 3" V2A stainless steel (newly installed) - Cylindrical design with feet / mounting console Tank dimensions: - Length: approx. 6,740 mm - Diameter: approx. 2,500 mm - Weight: approx. 6,500 kg - Overground installation Top offer: Liquid fertilizer (AHL) tank systems available in sizes from 5,000 to 100,000 liters. Water tanks and fire water tanks are also available. Of course, you can also help customize your tank system! All of our systems are thoroughly inspected and checked by selected personnel in our company. Cost-effective delivery can be offered upon request. Systems can be inspected at any time. Further aboveground and underground tank systems are available in all sizes and can be viewed at our premises. Have we convinced you with our offer? If you have any questions or special requests, please do not hesitate to call us—one of our experienced employees will be happy to advise you. Price/Shipping The price for the tank system is ex-works Warstein, free loaded. Delivery can be offered at a low additional cost. Delivery time: Immediate You will receive an invoice with VAT shown separately. Additionally, we buy existing tank systems and, as a certified specialist company in accordance with the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove these systems. Kind regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 15507225, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 9 980 h, X ašies eiga: 700 mm, Y ašies eiga: 420 mm, Z ašies eigos atstumas: 610 mm, įrankių magazino lizdų skaičius: 32, sukimosi greitis (maks.): 20 000 aps./min, sukimosi greitis (min.): 50 aps./min, TECHNINĖS DETALĖS Judėjimo eiga X ašyje: 700 mm Judėjimo eiga Y ašyje: 420 mm Judėjimo eiga Z ašyje: 610 mm Padavimo greičiai: 1 - 20 m/min Staklių paletė Paletės matmenys: 1 260 x 490 mm T-slotai: 9 x 12H8, 50 mm atstumu Maks. veleno sūkių dažnis: 50 - 20 000 aps./min Įrankių sistema Įrankių laikiklis: SK30 Įrankių skaičius magazinuose: 32 STAKLIŲ DETALĖS Valdymas: HEIDENHAIN iTNC 530M Matmenys ir svoris Matmenys / svoris: 2 500 x 2 560 x 2 700 mm Įrengimo matmenys: 4 300 x 2 950 x 3 012 mm Svoris: 5 100 kg Prijungimo galia: 22 kVA Darbo valandos Veleno darbo laikas: apie 9 980 h Valdymo įjungimo laikas: 78 165 h Staklių įjungimo laikas: 91 869 h Programos veikimo laikas: 54 682 h ĮRANGA 3D jutiklinis zondas (infraraudonųjų spindulių) Aušinimo skysčio sistema 3 bar / 30 l/min Kledpjyznvcjfx Aausr Alyvos rūko ištraukimo įrenginys Minimalios tepimo sistemos su dviguba dozavimo įranga FEHLMANN HSC nustatymai (ciklas 327) Pastaba: Spaustuvai ir įrankiai, kurie matomi nuotraukose, nėra įtraukti į pristatymo komplektą.

Būklė: nepatikrintas (naudotas), Gamybos metai: 2012, Funkcionalumas: nepatikrintas, pjovimo plotis (maks.): 4 500 mm, X ašies padavimo greitis: 140 m/min, dalies ilgis (maks.): 2 200 mm, Įranga: CE žymėjimas, dozatorius, TECHNICAL DETAILS Kledpfxjyxn Ade Aauer The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum tool diameter (saw unit): 380 mm Maximum tool diameter (scoring unit): 200 mm Saw blade projection: 95 mm Number of rip saw grippers: 5 Number of crosscut saw grippers: 8+4 Maximum feed speed: 140 m/min Connected load saw unit 1: 15 kW Connected load saw unit 2: 15 kW Connected load scoring unit 1: 2.2 kW Connected load scoring unit 2: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT - Second flexible pusher system - Quick-change system for saw blades - Label printer for barcode - CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the place of destination. External reference: 5711

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2011, Used steel storage tank in accordance with EN 12285-1 (with inspection certificate), double-walled, suitable for underground storage of heating oil and diesel fuels, featuring 1 manhole (alternatively available with 2 manholes). Capacity: 100,000 litres Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Additionally, we can equip our tanks with the following accessories: - Leak monitoring systems with under- and overpressure leak detectors - Manhole chamber with access cover, available in walkable or drive-over versions - Partition walls (for multi-compartment tank configuration) - Internal coatings (e.g. 2-component epoxy resin), partial or complete linings - Content and level measurement devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or petrol - Dispensers for diesel, biodiesel, and petrol – optionally available with complete fuel management systems - External tank insulation with PU foam Kljdsi Enxdepfx Aauer The tank is internally cleaned, and the external coating has been completely refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply inform us of the delivery location, and you will receive an immediate quote for exact freight costs. If you require any further information, please do not hesitate to call us or send us an email. We also offer trade-in and purchase of tanks/containers—please contact us for more details. Delivery time by arrangement! We also keep similar tanks continuously in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 litres

Gamybos metai: 2004, būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, plokštės ilgis: 3 000 mm, plokštės plotis: 1 200 mm, krovimo aukštis: 1 600 mm, TECHNINĖ INFORMACIJA Didžiausias plokštės plotis: 1 200 mm Didžiausias plokštės ilgis: 3 000 mm Maksimalus plokščių rietuvės aukštis nuo grindų: 1 600 mm ĮRANGA Judesio sistema: siurbtukų sistema Vakuuminis siurblys Kodpfx Aoyxnqueauslr Mašina parduodama ir pristatoma jos faktinėje ir teisinėje būsenoje („kaip matyta ir patiko“), remiantis fotodokumentacija ir aprašomojo pobūdžio techniniais/komerciniais dokumentais. Pirkėjas turi teisę apžiūrėti prekę prieš pasiėmimą ir prisiima atsakomybę už mašinos montavimą, saugą bei naudojimą paskirties vietoje. Išorinė nuoroda: 7684

Gamybos metai: 2011, būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, plokštės ilgis: 2 200 mm, plokštės plotis: 1 000 mm, krovimo aukštis: 1 600 mm, Įranga: CE žymėjimas, TECHNINĖS DETALĖS Maksimali plokštės ilgis: 2 200 mm Maksimalus plokštės plotis: 1 000 mm Maksimalus plokščių sukrovimo aukštis: 1 600 mm Stočių skaičius: 2 MAŠINOS DETALĖS Klsdpfx Aasyxnn Touer Valdymo sistema: WINDOWS ĮRANGA CE žymėjimas Plokščių sukrovimo stotis Stoties iškrovimas Sisteminės siurbtukai Vakuuminis siurblys Mašina parduodama ir pristatoma tikrosios techninės ir teisinės būklės pagrindu („kaip matyta ir patiko“) pagal fotografijų dokumentaciją ir aprašomąją techninę/komercinę informaciją. Pirkėjas turi teisę apžiūrėti prekę prieš atsiėmimą ir prisiima atsakomybę už įrengimą, saugumą bei mašinos naudojimą paskirties vietoje. Išorinė nuoroda: 7997

Gamybos metai: 1999, būklė: geras (naudotas), Tank & Environmental Protection Wozniack - Specialist company certified in accordance with the Water Resources Act (WHG) Dear Sir or Madam, We are offering an 80,000 liter double-walled storage tank for the storage of liquid fertilizer, specified as follows: The storage tank is equipped with a brand new internal plastic lining, which is resistant and suitable for the storage of liquid fertilizer. An acoustic leak detection device is installed externally in a lockable protection box. Additionally, the storage tank itself is double-walled and made of steel. The internal plastic lining has general building authority approval and is therefore suitable and authorized for the storage of liquid fertilizer (AHL) as well as NOx reduction agent AUS32 (AdBlue). - Nominal capacity: 80 cbm - Quantity: 1 - Used but fully refurbished, meaning the tank has been cleaned, reconditioned, primed, and painted - Colour finish according to RAL; custom colours available on request - Material: steel-in-steel, material grade S235JRG2 - Documentation: Manufacturer’s certificate/inspection certificate in accordance with DIN 6616 D/2 and nameplate - 1 dipstick - 1 ventilating nozzle - 1 filling nozzle 3" V2A stainless steel, newly installed - 1 new acoustic leak detector for double-wall monitoring - 1 ladder - 1 suction line 3" V2A stainless steel, newly installed - Design: Cylindrical storage vessel with legs/consoles Tank dimensions: - Length: approx. 12,780 mm - Diameter: approx. 2,900 mm - Weight: approx. 14,000 kg - Above-ground installation Top offer: Liquid fertilizer - AHL tank systems available in sizes from 5,000-100,000 liters. Water tanks and firewater storage tanks are also available. Of course, you also have the option to specify your own requirements for the tank system! All our units are thoroughly inspected and checked by selected employees in our company. We can also offer affordable delivery upon request. Klodpfec Nk E Aex Aaujr Viewing of our tank units is possible at any time. Additional tank systems for both above-ground and underground storage are available in all sizes and can be inspected at our premises. Have we convinced you with our offer? If you have any questions or specific requirements, simply give us a call—one of our experienced team members will be happy to advise you. Price / Shipping The price for the tank applies ex-works Warstein, loaded and ready for transport. Delivery can be offered at an additional, reasonable cost. Delivery time: immediate You will receive an invoice with the VAT separately itemized. In addition, we purchase existing tank systems and, as a specialist company certified under the Water Resources Act (WHG), we can professionally empty, clean, dismantle, and remove them. Best regards from Warstein Tank-und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Būklė: nepatikrintas (naudotas), Gamybos metai: 2016, Funkcionalumas: nepatikrintas, briaunos storis (maks.): 22 mm, sukimosi greitis (maks.): 12 000 aps./min, Įranga: CE žymėjimas, The machine has the following configuration: Kjdpfoyxndbex Aauolr Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge edge strip magazine glue pot for EVA hot-melt adhesive premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine trimming and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off saw unit RB02 Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with NC positioning CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 7673

Būklė: nepatikrintas (naudotas), Gamybos metai: 2004, Funkcionalumas: nepatikrintas, ruošinio ilgis (maks.): 2 500 mm, TECHNINĖS DETALĖS Plokštės ilgis min.: 300 mm Plokštės ilgis maks.: 2 500 mm Kljdpfxeyxnape Aauor Panelio grąžinimas ties kraštų laminavimo staklėmis: kairėje Plokščių išmetimas: per oro purkštukų stalą Mašina parduodama ir pristatoma faktinėje ir teisinėje būklėje („kaip matyta ir pritarta“), remiantis fotodokumentacija ir aprašomojo pobūdžio technine/komercine informacija. Pirkėjas turi teisę apžiūrėti prekę prieš atsiėmimą, o taip pat prisiima atsakomybę už mašinos įrengimą, saugą ir eksploatavimą paskirties vietoje. Išorinė nuoroda: 7877

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 30 000 l, bendras aukštis: 7 200 mm, vidinis skersmuo: 2 500 mm, išorinis skersmuo: 2 900 mm, bendras svoris: 6 000 kg, sienelės storis: 10 mm, sienos konstrukcija: vienos sienos, Kamerų skaičius: 1, liuko skersmuo: 600 mm, slėgis (maks.): 3 juosta, Buffer tank – 30,000 L, vertical, insulated Volume: 30,000 litres Internal diameter: approx. 2,500 mm External diameter (with insulation): approx. 2,900 mm Cylindrical height: approx. 5,520 mm Total height: approx. 7,200 mm Empty weight: 6,000 kg Operating pressure: +3.00 bar Operating temperature: -10 / +900 °C Medium: Water Density: 1,000 kg/m³ Bottom wall thickness: approx. 11 mm Shell / Cylinder wall thickness: approx. 10 mm Material / Specifications Shell material: P265GH / S235JR Insulation: 200 mm mineral wool Shell: smooth aluminium sheet (weatherproof) Mineral wool insulation will be newly fitted; insulation thickness can therefore be freely selected. Equipment Base type: feet Number: 4 Fastening: fixed Top head type: dished end (Klopper head) Bottom head type: dished end (Klopper head) Connections: 1 manhole DN 600 with blank cover 7x 1/2'' sockets for temperature sensors 2 lifting lugs on the shell 2 lifting lugs on the top head 2 lifting lugs on the tank feet 1 drain 2'' in the bottom head, routed externally and ending in a 2'' ball valve 1 vent Ø33.7 x 3.6 mm, routed down within the insulation on the side of the tank and ending in the manhole cover cap 1 connection DN 125, flanged externally, internally ending in a 90° bend within the tank centre 1 connection DN 125, flanged externally, internally ending in a 90° bend within the tank centre Documentation: Drawing Kjdpfx Aajxdknkjuslr

Būklė: nepatikrintas (naudotas), Gamybos metai: 2000, Funkcionalumas: nepatikrintas, X ašies eiga: 5 900 mm, Y ašies eiga: 1 560 mm, X ašies padavimo greitis: 80 m/min, Y ašies padavimo greitis: 60 m/min, sukimosi greitis (maks.): 20 000 aps./min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working area: 5,900 mm Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles in X direction: 6 Horizontal drilling spindles in Y direction: 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Ksdpfxjyxm Sws Aauelr Motor power: 10 kW Spindle speed: 20,000 rpm Tool magazine Number of positions: 10 Tool: head-mounted MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Worktable with suction cups Number of rails with suction cups: 10 Suction cups for securing the workpiece Vacuum pump The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the equipment prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8173