Sunkus suvirinimo ir tvirtinimo stalas

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 36 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Max. travel: 420 mm Minimum automatic travel: 1 mm Traverse speed: 100–3500 mm/min Reversal delay: 0–5 sec. Maximum table swivel 400/650 mm: 30°/15° TRANSVERSE SLIDE: Max. travel: 170 mm Rapid traverse: 30 mm Plunge depth in diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm GRINDING SPINDLE HEADSTOCK: Wheel: dia. x width x bore: 350x32x127 mm Drive power: 3 kW Peripheral speed vs: 30 m/s Spindle speed: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel to the right: 15°/30° Optional guard for wheel pack, max. width: 50 mm WORKPIECE HEADSTOCK: Swivel range: 0°–90° Speeds nw: 80/175/380/800 rpm Internal taper: Morse 4 Clamping collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Load during external grinding: 12 Nm Continuous drive option, speed range I: 30–300 rpm Continuous drive option, speed range II: 120–1200 rpm Hnodpfxew T Sc Ns Af Isg TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centers: 400 mm Measured over 400 mm: 0.002 mm Between centers: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for external grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage fluctuations: –15% to +10% Permissible frequency fluctuations: +/- 3% Compressed air: 5 bar Unless otherwise stated, the technical data is provided without obligation and subject to errors or omissions.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1091950, SPEZIFIKATIONEN Verfahrwege X-Achse Verfahrweg: 1626 mm Y-Achse Verfahrweg: 813 mm Z-Achse Verfahrweg: 762 mm Spindelnase bis Tisch (max.): 889 mm Spindelnase bis Tisch (min.): 127 mm Tisch Länge: 1626 mm Breite: 711 mm T-Nutenbreite: 16 mm T-Nutenmittenabstand: 125 mm Anzahl Standard-T-Nuten: 5 Maximale Tischbelastung: 1814 kg Hnedpfjt Dmmvex Af Isg Spindel Max. Leistung: 22,4 kW Max. Drehzahl: 7500 U/min Max. Drehmoment: 610 Nm bei 500 U/min Antriebssystem: 2-Gang-Getriebekopf Aufnahme: BT50 Lagerschmierung: Luft/Öl-Injektion Kühlung: Flüssigkeitsgekühlt Vorschub Eilgang X: 13,7 m/min Eilgang Y: 15,2 m/min Eilgang Z: 15,2 m/min Max. Arbeitsvorschub: 12,7 m/min Achsantriebe Max. Vorschubkraft X: 24.910 N Max. Vorschubkraft Y: 24.910 N Max. Vorschubkraft Z: 24.910 N Werkzeugwechsler Kapazität: 30 Werkzeuge Max. Werkzeugdurchmesser (mit Nachbarplatz leer): 254 mm Max. Werkzeugdurchmesser (alle Plätze belegt): 102 mm Max. Werkzeuglänge (ab Bezugsfläche): 406 mm Max. Werkzeuggewicht: 13,6 kg Werkzeugwechselzeit (Ø Werkzeug zu Werkzeug): 4,2 s Span-zu-Span-Zeit (Ø): 6,3 s Sonstiges Luftbedarf: 113 l/min, 6,9 bar Maschinengewicht: 10.206 kg MASCHINE AUSGESTATTET MIT: - Kühlmittel durch die Spindel - Späneförderer (Schnecke) - Starres Gewindeschneiden - Festplatte - Beleuchtung - Vollverkapselung

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MGB1320E, centro aukštis: 180 mm, ruošinio svoris (maks.): 100 kg, šlifavimo ilgis: 500 mm, šlifavimo disko skersmuo: 400 mm, bendras plotis: 14 150 mm, bendras ilgis: 18 000 mm, bendras aukštis: 14 750 mm, šlifavimo skersmuo: 320 mm, ruošinio ilgis tarp centrų: 350 mm, šlifavimo ratuko plotis: 50 mm, veleno greitis (maks.): 3 000 aps./min, padavimo ilgis X ašis: 500 mm, padavimo ilgis Z ašis: 150 mm, X ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 1 m/min, bendras svoris: 2 100 kg, ruošinio veleno greitis (maks.): 400 aps./min, Įranga: sūkių greitis be galo kintamas, Beijing No.2 Machine Tool Works (BEIER) Semi-automatic High-speed Cylindrical Grinder MBS1320E Online production equipment; machine testing available; roundness within 0.001 mm Manufacturer: BEIER MACHINE TOOL WORKS CO LTD Hedpstr Azksfx Af Isng

Sąlyga: naujas, GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid materials, and profiles of all kinds. Materials: Hard or soft steel, non-ferrous metals, plastics. Operation: Hjdpfod Hmnfjx Af Isng After adjusting the workpiece support and the side stops, the burr-laden workpiece is lightly pressed against the brush, which rotates around its own axis. The workpiece itself is not rotated; the brush performs this movement. The type of workpiece material, the thickness of the burr, and the desired edge rounding determine the contact pressure and duration, which is typically about 1–5 seconds. Technical specifications: Material: Steel, stainless steel, and non-ferrous metals (motor speeds 700–1,900 rpm, infinitely variable) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø300 (250) x 50 mm or 3 pieces Ø300 (250) x 35 mm Drive power: 3.0 kW Connected load: 3.5 kW Operating voltage: 3~, 400V, 50 Hz Rated current: 8A Pre-fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + handwheel 74 mm, + suction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), during processing at maximum speed 82 dB(A) Scope of delivery: Rotary head deburring brush machine GratMaxx with power socket, without cable Workpiece support table with adjustable angle stop and workpiece stops Tool for brush replacement No brushes included in delivery! Accessories: F50201 Circular brush, braided wire 0.38 mm F50202 Circular brush, steel wire 0.2 mm F50203 Circular brush, steel wire 0.38 mm F50204 Circular brush, VA braided wire 0.38 mm F50205 Circular brush, abrasive nylon U180 F50206 Circular brush, abrasive nylon U120 F50207 Circular brush, VA wire 0.20 mm For further technical data, please refer to the attached PDF document.

Sąlyga: naujas, MEP SHARK 230-1 NC HS 5.0 Double-Column Metal Band Saw Article Number: SH230-1NCHS Motor Power: 2.2 kW Hnodpfxjchhfuj Af Ijg Vice Opening: 235 mm Blade Dimensions: 2950x27x0.9 mm Weight: 1,000 kg Cutting Speed: 15 - 100 m/min (stepless) Cutting Capacity 0°: 230 / 230x230 mm Cutting Capacity 45° right: Cutting Capacity 45° left: Cutting Capacity 60° right: Cutting Capacity 60° left: Description: SHARK 230-1 NC 5.0, electro-hydraulic double-column fully automatic band saw with both semi-automatic and fully automatic operating modes. Max. remnant length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled band saw with the new MEP 50 – Windows-based control system. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke: 500 mm, repeatable to saw any length. Simple programming – enter cutting length and quantity, then press "START". Electronic blade tension control. Automatic cutting load monitoring through a servo valve mounted directly on the cylinder. Rotation control of the blade with instant stop in the event of a jammed saw blade.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, šlifavimo ilgis: 620 mm, plotis centre: 680 mm, šlifavimo disko skersmuo: 350 mm, bendras plotis: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings in the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to an as-new condition Geometry: - Scraping the X-axis guideway - Scraping the Z-axis guideway - Grinding the X-axis table Hodjrz Nflspfx Af Ijng - Grinding the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle head, grinding spindle head, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the remaining parts of the machine will retain the original paintwork Electronics: The entire machine's electronics will be checked and tested; defective switches and cables will be replaced

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (naudotas), Dumeta welding positioner, hydraulically height-adjustable 500 kg load capacity, height-adjustable welding positioner with through-hole 100–200 mm Table diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Height when tilted: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 – 1.25 rpm Hodpfx Aohua Dqof Ijng Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust design

Sąlyga: geras (naudotas), Gamybos metai: 2008, HAAS VF-5D / 40 CNC MACHINING CENTER TRAVELS: - X-axis: 1,270 mm - Y-axis: 660 mm - Z-axis: 635 mm Hnedpfx Aevf Nw Djf Isg DISTANCE BETWEEN TABLE SURFACE AND SPINDLE NOSE: 178 – 813 mm TABLE: - DIMENSIONS: 1,321 x 584 mm - LOAD CAPACITY: 1,815 kg - NUMBER AND SIZE x PITCH OF T-SLOTS: 7, 14 x 80 mm SPINDLE: - ROTATION SPEED: 8,000 RPM - SPEED RANGES: 2 - SPINDLE NOSE: ISO 40 - HIGH-PRESSURE / INTERNAL COOLANT FEED RATES: - RAPID TRAVERSE SPEED: 18,000 mm/min - WORKING FEED RATE: 12,700 mm/min - JOG: 0 – 1,260 mm/min TOOL MAGAZINE: 24 POSITIONS POWER: 15 kW WEIGHT: 7,000 kg YEAR OF FIRST INSTALLATION: 2008

Sąlyga: beveik kaip naujas (parodų įrenginys), Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3,000 kg Hsdsfxpggjpfx Af Ieng Handheld remote control with digital display Dual foot pedal control Height approx. min. 700 mm tilted to center, max. height 1,400 mm Faceplate diameter: 1,400 mm Tilt angle: min. 135° Rotation speed: 0.05 to 0.9 rpm Motor power: 3 kW

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workpiece headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, overhauled. Hydraulics Disassembled, motor check, replacement of hoses, defective and worn parts. Hydraulic block inspected. X Axis Disassembly, replacement of worn parts such as O-rings, seals, rings, etc., overhaul of hydraulic piston, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical cabinet Complete inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer’s protocol. Inspection and cleaning of various accessories. Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff number 8460.2920 TECHNICAL SPECIFICATIONS Nominal centre distance 600 mm Hnedpfxjw U Ry No Af Isg Max. centre distance (extended headstock) 750 mm Centre height, standard 125 mm Centre height with interchangeable shoes for headstocks 175 to 250 mm Max. workpiece diameter (125 mm centre height) 250 mm Max. workpiece diameter with interchangeable shoes 350 to 500 mm Table swivelling in either direction 10° Max. length for surface grinding (max. width = 200 mm) 900 mm Table speed with continuously variable hydraulic control up to approx. 6 m/min Table reversal dwell time 0-5 sec. Wheel for external grinding, diameter-width-bore 400x50x127 mm Wheel for surface grinding 250x13x76 mm Grinding spindle speeds 1500/1700/2200/3600 rpm Grinding headstock swivel 270° With index every 90° Vertical movement of grinding headstock, centre height 125-350 mm Cross travel of grinding headstock 285 mm Hydraulic rapid advance/retract stroke 40 mm Intermittent feed of the wheel by table reversal 0.001-0.03 mm/dia Continuous plunge grinding feed 0-0.9 mm/dia Micrometric feed stop, graduated 0.001 mm/dia Workpiece headstock swivel 360° Continuously variable workpiece spindle speed, standard/special 20-400 / 10-400 rpm Workpiece headstock/tailstock internal taper 5/3 Morse Grinding headstock motor, approx. 4 HP All technical details are given without obligation and subject to errors or omissions.