Vibracinis latakas Jöst 3500-500 FUF

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2021, veikimo valandos: 20 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK02UXKP0365, matavimo diapazonas X ašis: 550 mm, matavimo diapazonas Y ašis: 600 mm, Aukcionuojamas Zeiss T-Scan Hawk su tik 20 darbo valandų! TECHNINĖ INFORMACIJA Didž. matavimo sritis: 550 mm x 600 mm Matavimo tikslumas: 0,02 mm + 0,035 mm/m ĮRANGOS DUOMENYS Lazerio klasė: 2M klasė (akių saugumas) pagal IEC 60825-1:2014 Darbo valandos: 20 KOMPLEKTACIJA Nešiojamasis kompiuteris GOM Inspect programinė įranga Ihjdpfx Aex Sqfnsf Ist

Sąlyga: naudotas, Gamybos metai: 2016, Overview This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The system is fully equipped, in very good technical condition, and shows only minimal signs of use. The plant is still installed and connected, and can therefore be inspected in person at any time. Technical Data - Capacity: 60 bags/minute - Doypack/flat pouch formats: 20/25g, 50g, 300g, 500g, 750g - Capability for micro-dosing of powders Iodpfx Astz H T Djf Isht - Modern wide zipper/belt Scope of Delivery - Doypack packaging machine | Volpak | SI-280 F1 - Multihead weigher | Ishida | CCW-RV-228-S/05-SS - 4 raw material discharge stations - Lindor mixer - Cox & Plant dosing system between discharge stations, mixer, and multihead weigher - Ishida x-ray inspection system with reject, IX-GA-4075 - Ishida dynamic checkweigher with DACS-G-S0 reject - System for the injection of nitrogen or another inert gas, including a metering system - Dust extraction system - Euro hole punch - Smooth sealing system

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, keliamoji galia: 2 500 kg, gerklės gylis: 2 500 mm, tuščias svoris: 713 kg, statybinis aukštis: 3 350 mm, pasukimo diapazonas: 360 °, Pillar Jib Crane M25-2.5 TECHNICAL DETAILS Load capacity: 2,500 kg Jib length: 2,500 mm Height: 3,350 mm Slewing range: 360° Jib outreach: 2,500 mm Underside of jib: 2,980 mm Overall height: 3,350 mm Bolt circle diameter: 530 mm Base plate diameter: 610 mm Beam flange width: 150 mm Minimum approach dimension (Aa): 420 mm Maximum approach dimension (Ai): 820 mm Support column length: 1,530 mm MACHINE DETAILS Weight: 713 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 48 V EQUIPMENT Electric trolley Electric chain hoist Load capacity: 2,500 kg Lifting height: 4 m Lifting speed: 4 / 0.7 m/min Trolley Powered trolley Flange width range: 138–195 mm Flange width: 150 mm Travel speed: max. 10 m/min Travel speed: min. 3 m/min MACHINE DETAILS Trolley travel motor Power: 0.3 kW Rated current: 1.2 A Starting current: 4.2 A Ihsdex Nvtlopfx Af Iot Hoisting unit Hoist motor power: 3.6 kW Hoist motor rated current: 8.2 / 4.3 A Hoist motor starting current: 39 / 6.7 A Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 48 V

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, mašinos/transporto priemonės numeris: 10000987990, bendras aukštis: 5 300 mm, bendras ilgis: 30 000 mm, bendras plotis: 8 900 mm, keliamoji galia: 3 200 kg, kėlimo aukštis: 4 450 mm, Aukcione siūlomas Konecranes gamintojo salės kranas su 2 tiltais, kiekvienas turi 3,2 t keliamąją galią. TECHNINĖS DETALĖS Keliamoji galia: 3 200 kg Tarpatramis: 8 900 mm Kėlimo aukštis: 4,45 m Kėlimo greitis: 3,9 m/min (ASR 1,2 m/min) Iodpfsx Nvrzex Af Ieht Vežimo palei tilto greitis: 20 m/min be pakopų Kranų judėjimo greitis: 40 m/min be pakopų ĮRANGOS DETALĖS Tiltų skaičius: 2 Vežimėlių skaičius: 2 Matmenys ir svoris Matmenys (I x P x A): 30 000 x 8 900 x 5 300 mm Vežimėlio svoris: 230 kg Kranų svoris be vežimėlių: 1 300 kg Elektros duomenys Darbinė / valdymo įtampa: 400 V / 48 V, 50 Hz Nominali galia: 3,0 kW KOMPLEKTACIJA Bėgiai Nuotolinio valdymo sistema Srovės surinkimo juostos Perkrovos apsauga Krovinio kaupiklis Signalo sirena Vežimėlių ir krano judėjimo priekiniai ir pabaigos išjungikliai (lėtas/stabdis) Vairavimo ritinėliai šoninių jėgų mažinimui Buferio prailginimas, kompensuojantis vairavimo ritinėlius

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, bendras plotis: 6 100 mm, bendras ilgis: 1 550 mm, bendras aukštis: 2 350 mm, bendras svoris: 1 800 kg, garantijos trukmė: 6 mėnesiai, galia: 3 kW (4,08 AG), įėjimo įtampa: 400 V, Sarp Filled Pasta Pasteurization Line – Hourly Output from 250 to 400 kg The line consists of the following units: 1) Loading conveyors feeding the pasteurizer 2) Pasteurizer model SPA610VD, electrical power 1.2 kW, thermal power 120,400 kcal/h (140 kW), belt width: 1000 mm, pasteurization tank length: 6000 mm, overall dimensions: 10163 x 1600 x 2210 mm (h), total weight: 1000 kg 3) Elevator conveyor model SNZ 4) Wrapper-Cooler model SIR4105-A 5) Complete electrical control panel The entire line is built in stainless steel and features the following specifications: - Conveyor belt width: 1000 mm - Pasteurization belt speed adjustable from 1 to 3.3 meters/minute - Wrapper conveyor speed adjustable from 0.65 to 1.95 meters/minute - Cooler conveyor speed adjustable from 0.43 to 1.3 meters/minute - Pasteurization chamber temperature: from 96 to 99°C - Wrapper internal temperature: from 65 to 70°C - Cooler internal temperature: +3°C - Pasteurization time: from 1’50” to 5’30” - Wrapping time: from 3’40” to 10’55” Ihjdpfx Afjui Rixo Iot - Cooling time: from 7’58” to 24’ A suitable steam generator for this line is available, but not included in the listed price. Electrical installation 220/400 V – 3 phase – 50/60 Hz, completely refurbished, 1-year warranty, CE and USDA compliant. 1-year warranty!!! WHY BUY FROM A DEALER??? BUY DIRECTLY FROM THE MANUFACTURER!!! For more information, contact Ostoni in Italy! WE HAVE THE LARGEST ONLINE SELECTION OF MACHINES AND MOLDS FOR THE PRODUCTION OF RAVIOLI, TORTELLINI, CAPPELLETTI, TORTELLONI, GNOCCHI, PELMENI, PIEROGI, VARENIKI, AND MANY OTHER PASTA SHAPES!!!

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, mašinos/transporto priemonės numeris: 11690446, keliamoji galia: 4 000 kg, kėlimo aukštis: 6 530 mm, TECHNINĖS DETALĖS Sparno ilgis: 9,9 m Kranas keliamoji galia: 4 000 kg Kėlimo aukštis: 6,53 m Kėlimo greitis esant pilnai apkrovai: 3,2 m/min Kėlimo greitis esant dalinei apkrovai: min. 3,0 m/min iki maks. 7,5 m/min Kraukiklio važiavimo greitis: 20 m/min Ihodpfsx Nvpgjx Af Iet Krano važiavimo greitis: 40 m/min ĮRANGOS DETALĖS Svoris Kraukiklio (katės) svoris: 390 kg Krano svoris be kraukiklio: 1 750 kg Klasifikacija Krano klasė: 3U4/Q2, EN 13001-1 Kėlimo mechanizmo pavaros grupė: 4.3 + 4.4 m / ISO M6 Krano sijos pavaros grupė: 16 m / M5 Elektrotechniniai duomenys Maitinimo įtampa: 400 / 48 V / 50 Hz Nominali galia: 3,3 kW ĮRANGA Belaidė valdymo sistema Perkrovos apsauga Krovinių kolektyvinės atminties įrenginys Važiavimo krypties pradžios ir pabaigos ribos nustatytuvai kranui ir kraukikliui Nuotolinio valdymo pultas „Minijoystick“ Atsarginis siųstuvas Laikymo spinta Atsarginė baterija Įkrovimo stotis Signalinis garsinis signalas Kablio susidūrimo apsauga Kablio svorio centro nustatymas Rankinis krano kablio pozicijos sekimas Saugos kabelių sistema su tinklo atjungikliu ir prijungimu Prispaudžiami laikikliai Pastovi laiptinė (laidai montuojami užsakovo)

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 10000987991, bendras svoris: 5 110 kg, keliamoji galia: 6 300 kg, pagrindinis kėlimo greitis: 4 000 mm/min, kėlimo aukštis: 5 200 mm, 6.3t S-DG Double-Girder Overhead Crane TECHNICAL DETAILS Crane Rail Type: 60 × 40 Load Capacity: 6,300 kg Span: 17,100 mm Maximum Deflection of Crane Bridge under Rated Load: 22.8 mm Hoist Maximum Lifting Capacity (Hoist 1): 6,300 kg Hoist Classification: 1.2 + 1.2 m (D_min) Lifting Height: min. 4.9 m / max. 5.20 m Type of Trolley: Double-rail trolley Type of Hoist Control: with load drift compensation Hook Type/Size: RSN2.5V Speeds Lifting Speed at Rated Load: min. 0.08 m/min up to max. 4.0 m/min CSR Speed at Partial Load: max. 6.00 m/min Trolley Travel Speed: max. 20 m/min Crane Travel Speed: max. 40 m/min MACHINE DETAILS Weight of Crane with Hoist: 5,110 kg Electrical Data Mains Voltage: 3 Ph / 400 V / 50 Hz Control Voltage: 48 V Ijdpfx Ajx Nvlbof Ioht Application Area: Indoors (factory hall) Ambient Temperature: min. 5 °C to max. 40 °C Motor Output Main Hoist Motor: 4.5 kW Duty Cycle Main Hoist Motor: 60% ED Trolley Travel Motor: 1 × 0.45 kW Duty Cycle Trolley Travel Motor: 40% ED Crane Travel Motor: 2 × 0.65 kW Duty Cycle Crane Travel Motor: 40% ED EQUIPMENT DynADrive inverter control Control Pro Performance 4-step upper/lower hoist limit switch Hoist brake Rope drum Gearbox Overload protection Load collective memory Pre-limit and end-limit switches for trolley and crane travel (slow/stop) Crane with REMOX516MI radio remote control including signal horn (sound level 98 dB) including spare transmitter for radio remote control including storage cabinet for radio remote control Rope angle features Safety conductor line approx. 30 m long, along center column line including main switch and power supply at any chosen point Rising main (fixed wiring) to be provided by customer Note: Additional technical data can be found in the attached offer.

Sąlyga: visiškai atnaujintas (naudotas), Hosokawa Mikropul ACM 10 Fine Impact Mill / Classifier Mill with New Control Cabinet and Accessories We are offering a Hosokawa Mikropul ACM 10 fine impact mill in excellent condition—an ideal solution for precise grinding and classification of powders and granules. Ihjdpfx Aovn Riaof Ist Technical Data: • Model: ACM 10 • Motor Power: 9.2 kW • Condition: Excellent (completely overhauled), with a newly built control cabinet Additional Information: • Classifying Screen Available: A suitable classifying screen is also in stock. • Comparable Mills: We have similar/analog mills in stock that operate on the same principle as the ACM 10. Advantages of the ACM 10: • Compact Design: Saves floor space in your production area • Energy Efficient: Optimized for reduced power consumption • Versatile: Suitable for processing chemicals, food products, pharmaceuticals, and more Condition and Inspection: The machine is ready for immediate use and can be inspected by appointment. We also offer technical accessories and spare parts for seamless integration into your production line. Contact us for further information or a customized quote.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8531, Famot MEXPOL TUM 35 aukcionavimas! Ihodpfx Afox Ngnmj Iot

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 40167, MAHO universalios frezavimo staklės aukcionas! Iedpfex Ngkzox Af Ieht

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2018, We are offering a Cabinplant snack packaging line manufactured in 2018, which includes: - Single-lane elevator - Triple-lane elevator - 24-head multihead weigher with 1L hopper - 32-head multihead weigher with 1L hopper - KEN Hygiene System EWD 50 (Cleaning station for weigher accessories) - Platform with stairs - Distribution tool – 2 units - Multivac R245 Type ASE 500, gas, vacuum, without vacuum pump Ihsdpfxjpxm Ugs Af Iot The set was only used during equipment testing, operating for approx. 100 hours. The line was dismantled by the official service teams of Cabinplant and Multivac.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 50 h, mašinos/transporto priemonės numeris: 2390, lenkimo jėga (didž.): 100 t, eigos ilgis: 140 mm, gerklės gylis: 300 mm, atstumas tarp stulpų: 2 600 mm, bendras svoris: 6 650 kg, TECHNINĖ INFORMACIJA Lenkimo jėga: 100 t Cilindro eiga: 140 mm Atidarymo plotis be įrankių: 345 mm Atstumas tarp stulpų: 2.600 mm Įgilinimas: 300 mm Pristatymo greitis: 160 mm/s Lenkimo greitis: 10 mm/s Grąžinimo greitis: 130 mm/s Ihodpex Eyv Nefx Af Ijt Sūkiai: 1.500 aps./min. ĮRENGINIO DUOMENYS Valdymas: DA 66 T Alyvos kiekis: 125 l Bendras svoris: 6.650 kg Galia: 7,5 kW Įtampa/maitinimas: 400 V AC Valdymo įtampa: 24 V AC/DC Darbo valandos: mažiau nei 50 h

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 220.242, pjovimo ilgis (maks.): 4 300 mm, pjūklo disko skersmuo: 350 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Max. saw blade diameter (main): 350 mm Scoring saw blade diameter: 300 mm Max. saw blade projection above table: 95 mm Stack Height and Panel Thickness Max. stack height: 80 mm Min. panel thickness: 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Ihsdpfxox Sqpmj Af Iot Other Specifications Max. clamp opening: 90 mm Working height: 970 mm Machine height: 2,020 mm Machine Precision Positioning accuracy: ±0.1 mm (measured at feed-in) Cutting straightness: ±0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Feed speed, saw unit forward: 5 - 120 m/min Feed speed, saw unit return: 120 m/min Feed speed, infeed forward: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed speed, infeed return: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Gamybos metai: 2002, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: Reg Nr. 976, Machine Description: Used Mixer Dryer Manufacturer: AVA / Holland Merten GmbH Model: HTK 200 Year of Manufacture: 2002 Speed: 107 rpm Material: Stainless steel Drive Motor: 5.5 kW Design: EExdellCT4 Total Capacity: 235 liters Product-contact parts: Stainless steel 1.4571 Gearbox: Helical geared motor Ijdpfxeitcvus Af Ieht Features: Double jacket, mechanical seal, shaft heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: available Note: Operating temperature 130°C, design temperature 200°C, mixer internal pressure -1/+3 bar, double jacket pressure +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used - very good Price: on request

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0-250-05-2654, X ašies eiga: 3 950 mm, Y ašies eiga: 1 943 mm, Z ašies eigos atstumas: 400 mm, valdiklio modelis: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel Paths X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical Drilling Unit X-axis Drilling spindles: 16 Feed stroke Z: 60 mm Drilling depth: max. 38 mm Rotation direction: right/left Speed: 1,500 – 5,900 rpm Drive: 1.5 kW Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical Drilling Unit Y-axis Drilling spindles: 15 Feed stroke Z: 60 mm Drive: 1.5 kW Rotation direction: right/left Speed: 1,500 – 5,900 rpm Drill chuck: d = 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Iodsx Sqm Sepfx Af Isht Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal Drilling Unit X-axis Drilling spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: left Speed: 4,800 rpm Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal Drilling Unit Y-axis Drilling spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: right Speed: 4,800 rpm Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Milling Motor Drive power: 7.5 / 10 kW (S1/S6 mode) Speed range (stepless): 750 – 18,000 rpm Cooling: liquid recirculation cooling Bearings: hybrid (ceramic) Extraction: central Tool Changer Magazine Magazine capacity: 30 tool stations Tool weight: max. 5 kg Change time: approx. 8 – 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Liquid recirculation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 mode EQUIPMENT Integrated CNC axis (360° rotation) Torque support Main spindle (motor power 7.5 / 10 kW, HSK F63) Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-axis 120 mm Compressed air connection strip with quick couplings Extraction hood for additional top milling motor Top router 5 kW with hydraulic quick-clamp system Left side safety guard with door Safety tread mat 3,250 mm Control cabinet left Note: Further details regarding the machine’s equipment can be found in the attached documents.