"Goudsmit Electro Magnetic" konvejerio juostos

Sąlyga: naujas, Gamybos metai: 2023, For sale due to incorrect planning: a new, original-packaged cantilever discharge unit for a Fröhling heating system, suitable for a 6 m storage area, including a 1 m screw conveyor extension. The unit features separate drives for the screw conveyor and the rotary plate (two motors), making it ideal for use with two boilers. The photo shown is from another installation, as my unit is still packaged. Kjdpfx Aaeuq Iy Rj Iend

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2018, Mobile hammer mill Mobil Flex 1000 with drum magnet and discharge conveyor Drive: 250 kW electric motor 4 hydraulic outriggers for lifting the machine during transport Total weight: 33,000 kg Rotor weight: 3,000 kg Production capacity: up to 11 t/h (depending on material size, screen size, and parameter settings) with soundproof enclosure Dimensions: 11,750 x 2,500 x 4,380 mm Number of hammers: 24 units Hammer weight: 22 kg the machine is being overhauled Kodpfx Aaoph Uy Ts Iond

Gamybos metai: 2002, Sąlyga: beveik kaip naujas (naudotas), L x W x H: approx. 12.1 x 3.0 x 3.25 m Volume: 55 cbm Conveying capacity: approx. 150 m³/h 6 dosing/discharge screws – driven in pairs, each with 11 kW Weight: approx. 15 t Was in operation at an RDF (Refuse Derived Fuel) plant Kjdpsllvpzsfx Aa Isnd

Sąlyga: naujas, Bunker belt system suitable for feeding presses, shredders, etc. Delivery possible throughout Europe. Technical specifications: Item 1: Feed hopper Item 2: Infeed conveyor 1.5 kW, conveyor width: 1100 mm, axle distance: 3500 mm Item 3: Inclined conveyor 1.1 kW, conveyor width: 1100 mm, axle distance: 4700 mm Standard discharge height: 2800 mm (can be increased with spacer feet as shown in the illustration) Made to order Kjdpfx Aodxwlqea Isnd Further information and data available on request.

Gamybos metai: 2022, Sąlyga: beveik kaip naujas (parodų įrenginys), Aluminum angled conveyor belt with substructure Horizontal section: 3,000 mm Inclined section: 5,000 mm Incline angle at the bend (optional): 35°, 40°, or 45° Total conveyor belt length: - Discharge height: - Height of horizontal section: - Conveyor belt width: 600 mm (extendable) Drive drum + return drum Ø150 x 620 mm, S235 steel, welded and machined Knsdpei Igzfofx Aa Iod Steel return drum at bend, mounted and crown-turned Reinforced aluminum profile construction 135 x 45 mm PU conveyor belt DM 10/2 0+005 PU incl. wave edge, petrol matte Drive: Motor 1.1 kW, speed 0.3 m/sec Connection: 230/400V, 50Hz, Protection class IP54 Drive etc. ready for connection, motor included 2 pcs wave edges 80 x 45 mm 39 pcs T60 cleats, spacing 401 mm 2-ply, especially laterally stable Usable width: 470 mm, calculated as follows: Transverse arrangement -70+45-50+470+50+45-70 mm

Sąlyga: naujas, Gamybos metai: 2024, Shredding shafts for Hammel 850 / Olnova 85 (ALL VARIANTS available) Contact us for enquiries! WERT GmbH manufactures exclusive shredding shafts for the processing of metal, wood, waste wood, roots, mixed construction waste, tires, construction debris, concrete, and end-of-life tires in various versions. "MADE IN GERMANY" We produce exclusively in Germany using only the finest materials. We stand out with our high manufacturing precision and quality. Delivery times as agreed. Kjdpfx Aaohpipdj Iond WERT GmbH is a metalworking company specialized in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Lindner, Eggersmann, Terex, and Keestrack. With our in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our aim is to consistently fulfil our clients’ individual requirements through technological excellence and continuous improvement. We support companies from various industries, including waste management, recycling, and mechanical engineering, and strongly focus on long-term partnerships. With our reliable and high-performance shredding solutions, we help our customers to increase their efficiency and competitiveness.

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 20 536 h, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, tuščias svoris: 16 000 kg, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Press transport weight: 16 t Special equipment: Kedpou Thypsfx Aa Iend - Wear-resistant floor made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small particle size - Control cabinet air conditioning - Machine base height increase: 200 mm Note: The machine is currently located in our workshop and is being partially overhauled. We anticipate that the overhaul work will be completed by the end of October and the machine will then be tested and released for sale.

Sąlyga: naujas, GENERAL A characteristic feature of the ZIS series single-shaft shredders is their spacious cutting chambers, whose stability is ensured by their welded steel construction. The generous rotor diameter of 457 mm further highlights their robust design. Rotor widths are available in 1200, 1500, and 2000 mm. The ZIS series preserves all benefits of the ZSS series: oversized gearbox drive, reversible cutters, bolted knife holders, rugged external bearings, hydraulic screen cradle, user-friendly operation, and advanced control systems. APPLICATIONS The ZIS series was primarily developed for bulky hollow bodies such as IBC containers, waste bins, pallets, and water butts. Additionally, the machine offers universal applicability for numerous uses in the plastics and wood processing industries. Like all Zerma shredders, the ZIS machines can be equipped with various wear protection options. ADVANTAGES - 35% greater cutting chamber volume compared to the ZSS series Knjdpfsghgdvjx Aa Ied - Internal hydraulic pusher - Increased pusher retraction speed - Compact dimensions - Knife holders bolted into rotor pockets

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mobile shredding machine - used & factory-refurbished - Arjes 760 D with magnet - mounted on a wheel axle - complete conversion to hydraulic drive -- High Performance Shredder -- - the most powerful shredder in its class - for heavy-duty applications REBUILD: The machine was completely disassembled and rebuilt from the frame up. Conversion to hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 kW / 477 HP!!! (no AdBlue) - Transmission: SYNCHRON: 2x 125,000 Nm - Hydraulics: Bosch Rexroth – 285 cc pump + 2x 215 cc hydraulic motors - Controls: NEW - Hydraulic hoses: NEW - Radio remote: NEW Knedsv Dtfvjpfx Aa Iod - Shafts / tools: NEW (combination tool for wood, waste, light scrap) Machine is equipped with post-crushing bar WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools as well as machine refurbishments for renowned brands such as Hammel, Arjes, Lindner, Eggersmann, Terex, and Keestrack. With our in-house design department and highly skilled team, we provide tailored, innovative solutions that meet the highest quality standards. Our goal is to continuously meet our customers’ specific requirements through technological excellence and ongoing improvement. We serve companies from various sectors, including waste management, recycling, and mechanical engineering, and place great value on long-term partnerships. With our reliable and high-performance shredding solutions, we help our customers increase their efficiency and competitiveness.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 22 kW (29,91 AG), bendras svoris: 2 600 kg, Gamybos metai: 2006, Cutting unit width: 600 mm Knjdpfx Aetzbvyja Iod Cutting unit length: 1,200 mm Shaft center distance (between knife shafts): 250 mm Knife shaft rotational speed: approx. 16 rpm Knife shaft torque: approx. 17,000 Nm Feed hopper: 1,200 mm x 2,400 mm Drive power: 2 x 11 kW Total drive power: 22 kW Weight: 2,600 kg