Konusinis trupintuvas Krupp

Gamybos metai: 2012, veikimo valandos: 6 000 h, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Parduodama Terra Select T5 būgninė sijotuvas, pagaminta 2012 m., su maždaug 6 000 moto valandų. Mašina turi 55 kW Perkins dyzelinį variklį ir dvigubą smulkios frakcijos transporterį. Pridedamas gera 40 mm būgnas, taip pat prastesnės būklės 20 mm ir 15/12 mm būgnai. Galima apžiūrėti ir išbandyti vietoje. Gtsdpfow N Hmuex Aczet

Sąlyga: paruoštas naudoti (naudotas), Būgniniai varikliai naudoti būgniniai varikliai didelės atsargos diržo pločiams nuo 300 iki 1400 mm Gtodpfx Aoi A Apusczst

Gamybos metai: 1982, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 14320, Baler / Paper Baler Gjdpfxeiuky Io Aczott

Sąlyga: paruoštas naudoti (naudotas), Kūginis trupintuvas Svedala Prekės ženklas: Svedala Tipas: 36/H/MC Gsdpfx Acjpn I H Tozstt Įsk.: bazinis rėmas ir alyvos blokas

Gamybos metai: 2024, Sąlyga: naujas, LITech jaw crushers are ideally suited for the pre-crushing of extremely hard, medium-hard, tough, and brittle materials such as construction debris, bentonite, soils, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous metals, slag, and many more! Gedpfx Acsga Nfcszjtt

Gamybos metai: 1985, Sąlyga: paruoštas naudoti (naudotas), Table dimensions: 1435x460 mm, number/width/spacing: 5/16/80 mm, control unit: TNCi-120, length: 1435 mm, width: 2330 mm, height: 1648 mm, weight: 3.1 t, with documentation, accessories available, no known defects, on-site inspection possible. Gtsdpfx Acelbmupjzst

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Gedpfx Aovwlqqeczott Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: geras (naudotas), kuro tipas: dyzelinas, Gamybos metai: 1995, Įranga: galvos apsauga, kabina, reguliuojamas strėlė, FUCHS 714 wheeled material handler Year of manufacture: 1995 Fully operational and running condition. Cab can be raised. For more details, please call. Gtsdpovu U Aqjfx Aczot

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 239 kW (324,95 AG), bendras svoris: 50 500 kg, Gamybos metai: 2002, veikimo valandos: 11 245 h, mašinos/transporto priemonės numeris: CCC00513, 239 kW Svoris: 50,5 t Variklis visiškai suremontuotas Beveik nauja važiuoklė Gtsdpfx Ajlhqhmeczot Grandinės plotis: 600 mm Nauji cilindrų sandarikliai

Sąlyga: nepatikrintas (naudotas), Hydraulic press for pressing paper and similar materials. The machine was fully operational prior to disassembly. Press dimensions: Gtjdpfsh Nyfyjx Aczst Length: 4850 mm, width: 1370 mm, height: 3000 mm (reducible to 2300 mm). Weight approx. 3500 - 4000 kg. For further information, please contact: +48 539 660 495.