Lygiagretus tekinimo staklės ZMM CU/1000 500 x 3000

ZMM CU 1000

Sąlyga: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 700 mm, tekėjimo ilgis: 6 000 mm, ašies variklio galia: 30 W, Tekinys yra geros techninės būklės, prijungtas, galima išbandyti, skaitmeninis matavimas, priekio plokštė, lunetos. Kwedpex A S Sbjfx Abreu

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) Kjdpfx Abexmhdnorswu - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: geras (naudotas), Gamybos metai: 1998, ZMM Sliven - CU 1000 luneta Kwsdsx Ttfaopfx Abrsu

Sąlyga: naujas, Turning diameter: 325 mm Turning length: 1000 mm Swing diameter over cross slide: 250 mm Swing diameter over bed gap: 440 mm Spindle speeds: 12 (85-2000) rpm Tailstock Morse taper: MK 3 Kwodpetycpasfx Abrju Quill travel: 100 mm Quill diameter: 40 mm Spindle mount: DIN 55027 No. 5 Spindle bore: 32 mm Longitudinal feed: 0.006 - 1.77 m/min Cross feed: 0.003 - 0.885 m/min Total power requirement: 2.2 kW Machine weight approx.: 770 kg Space requirement approx.: 2150 x 950 x 1350 mm Equipment: - Coolant system - Machine lamp - Chip guard at rear - Spindle guard - Chuck guard - Tool post guard - Change gears *Special Equipment* - 3-jaw chuck Ø 160 mm, type 3204/DIN6350, BISON - MULTIFIX quick-change tool post type A, incl. 4 tool holders - 2-axis digital readout DRO Newall - Foot pedal with braking function, CE-compliant

Sąlyga: naudotas, Gamybos metai: 2002, Techniniai duomenys: Sukimosi skersmuo: 475 mm Sukimosi ilgis: 1500 mm Valdymas: HEIDENHAIN MANUAL PLUS 4110 Sukimosi skersmuo virš atramos: 260 mm Sukimosi greitis: 3000 aps./min Revolverinė galva: 12 pozicijų Veleno anga: 78 mm Griebtuvų eiga: 120 mm Staklių svoris apie: 3,1 t Užimama vieta apie: 3,2 x 2 x 1,9 m Ciklinis tekinimo staklės, Kodpfx Abexhqqmerswu 12 pozicijų SAUTER revolverinė galva, VDI 30 dydis, Labai daug priedų (žiūrėti nuotraukas) Mechaniškai rodomas eksploatacijos valandų skaičius: apie 4700 h

Sąlyga: naujas, Condition: New Country of origin: Bulgaria Price: €115,600 Leasing rate: €2,184.84 Swing diameter over bed: 1,090 mm Between centers: 3,000 mm Center height: 500 mm Spindle bore: 155 mm Swing diameter over cross slide: 690 mm Bed width: 700 mm Spindle mount / DIN 55027: Size 15 Spindle taper: 160 M Number of spindle speeds: 24 Number of feeds: 160 Longitudinal feed: 0.032 - 38.9 mm/rev Cross feed: 0.016 - 19.45 mm/rev Metric thread range: 0.5 - 480 mm Inch thread range: 60 - 1/16 TPI Module thread range: Cross slide travel: 525 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: MT 6 Tailstock quill travel: 260 mm Motor power: 22 kW Weight: 7,500 kg Drive via gearbox 3-axis digital readout (Fagor) Quick-change tool post Amestra, Multifix-type system incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck Bison 3204/DIN 6350, Ø 500 mm Fixed center Coolant system Full-length rear chip splash guard Leadscrew and feed shaft cover Chuck guard Tool holder guard Leveling bolts and plates Reducing sleeve for tailstock quill Kwjdpfjwiqv Uex Abrou Tailstock movement by electric motor Low-voltage machine lamp Operating manual Equipment according to CE standard OTHER TURNING LENGTHS: Turning length 1,500 mm: €101,220.00 Turning length 2,000 mm: €104,720.00 Turning length 4,000 mm: €123,610.00 Turning length 5,000 mm: €134,700.00 Turning length 6,000 mm: €151,230.00

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Techniniai duomenys: Aukštis tarp centrų: 500 mm Sukimosi skersmuo: 1090 mm Sukimosi skersmuo virš skersinio pastūmos: 690 mm Atstumas tarp centrų: 1500 mm Apsisukimų skaičius: 6 – 1250 aps./min. Veleno anga: 155 mm Skaitmeninis padėties indikatorius: SONY Lovo plotis: 700 mm Įrankio laikiklis: MK 6 Variklio galia: 30 kW CE ženklinimas Matmenys (ilgis x plotis x aukštis): apie 3500 x 1750 x 1900 mm Svoris: apie 7,5 t Priedai: Centrinis tepimas Aušinimo skysčio sistema Galinė purškimo apsauga 3 žiotų tekės griebtuvas 500 mm 4 žiotų tekės griebtuvas 800 mm Kodpfxjxlgmfs Abrowu Pardavėjas neatsako už rašymo ar duomenų perdavimo klaidas. Mašinos išvaizda, techninė būklė ir nusidėvėjimas atitinka jos amžių; naudotos mašinos parduodamos be jokios garantijos.

Sąlyga: naudotas, Gamybos metai: 2013, valdiklių gamintojas: Siemens, valdiklio modelis: 840Dsl, Description: Kwedjw Tg Adopfx Abrju Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector: Pneumatic Z-axis travel: 750 mm Tool Turret I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool speed: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool speed: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feed: Short bar loader, EMCO LM 1200 Finished parts removal: Workpiece pick-off device (pneumatic) with conveyor belt Oil mist extraction: Mechanical separator, Absolent make Tool holders: Various fixed and driven holders Additional equipment: Spindle chiller unit

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. Ksdpfx Aotzdyzebrjwu • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!

Sąlyga: naudotas, Gamybos metai: 2005, Tekinimo staklės Mazak QTN 200, pagaminimo metai 2005 Mazatrol 640T 210 mm Kitagawa BB 208 griebtuvas Veleno skersmuo 65 mm Kwedpfx Aboxgpqpsrsu Tekinimo ilgis 500 mm Tekinimo skersmuo 380 mm Grąžulas Įrankių jutiklis