Žemagrindė puspriekabė

Gabelstapler/Arbeitsbühnentransporter Klapprampe

Būklė: naudotas, Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, gerklės gylis: 1 250 mm, Radial Drilling Machine Manufacturer: Breda Model: R 55-1250 Year of manufacture: 1994 Technical Details Iedpov Rpf Ssfx Ab Soap Manufacturer: BREDA Model: R 55-1250 Arm Length: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Thread cutting in steel: M 50 Thread cutting in cast iron: M 65 Spindle taper: MT 5 Arm reach: 1250 mm Traverse of spindle box: 930 mm Minimum/maximum distance from base plate: 536 – 1375 mm Vertical travel of arm: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 - 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate: 2070 x 910 mm Base plate clamping surface: 1325 x 910 mm Motor power: 4.4 kW – 380 V Dimensions (L x W x H): 2.1 x 1.0 x 2.5 m Weight: 3 t Accessories Drilling table 750 x 600 x 550 mm Coolant system Hydraulic clamping All information subject to change without notice. A demonstration is possible at any time in our showroom.

Būklė: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, programmable lowering, integrated in each support 8 workpiece stops, mounted 670 mm from the rear in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, programmable lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into machine table Vacuum pump 90 m³/h Processing head configuration: Mounted on Z2 axis Drilling unit BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in X direction Grooving saw, diameter 120 mm fixed in X direction Grooving saw, diameter 120 mm fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Right/left rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the gluing process 16-slot tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with 360-degree endless rotation Glue application for hot-melt adhesives Double pressure roller, exchangeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at 8 degrees angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results with wood edges with primer of 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Iodpfx Asxraimob Seap Min. internal radius 18 mm for edges less than 1 mm thickness Min. internal radius 30 mm with edge thickness 2 mm Min. panel size for edge banding 300 x 300 mm Min. size for banding inner cutouts 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine; this configuration restricts pendulum operation. Roll diameter (edge material): 800 mm Safety equipment: * Safety mats in front of the machine * Right-side safety guard with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/trimming and radius milling unit - Combination profile/flat scraping unit - Sawing unit

Būklė: naujas, ašių konfigūracija: 3 ašys, Gamybos metai: 2025,

Būklė: naujas, ašių konfigūracija: 3 ašys, Gamybos metai: 2026,

Būklė: naujas, mašinos/transporto priemonės numeris: 1, tuščias svoris: 11 000 kg, didžiausias leistinas svoris: 28 000 kg, bendras svoris: 39 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 13 650 mm, krovinių skyriaus plotis: 2 550 mm, krovos erdvės aukštis: 870 mm, pakaba: oras, padangos dydis: 245.70 r 17.5, spalva: tamsiai raudona, Gamybos metai: 2020, Įranga: ABS,

Būklė: naudotas, Drilling capacity in steel (diameter) / mm Throat (distance from spindle to column) / mm Workpiece height - max. / mm Iaodpfx Aboud Ttne Sjp Total power requirement / kW Machine weight approx. / t Space requirement approx. / m Table dimensions: 800x800mm Height: 590mm

Būklė: naudotas, Gamybos metai: 1983, 4 x complete spray booths with drying ovens for buses. Fully operational, including all walls/constructions and motors/burners. Iasdpfowrpwvjx Ab Ssp

Būklė: paruoštas naudoti (naudotas), Speed: 37-1900 rpm, on-site inspection is possible. Iedpfxoqvnmfs Ab Soap

Būklė: naudotas, Naudota mašina Įranga ir techniniai duomenys: Iajdpex Rr D Aofx Ab Sjp - Pjovimo ilgis: 5 300 mm - Pjovimo aukštis: 2 200 mm - Automatinė mašina Prieinamumas: pagal susitarimą, apie 2-3 savaites Vieta: Šiaurės Reinas-Vestfalija

Būklė: naujas, Gamybos metai: 2025, bendras aukštis: 4 000 mm, bendras ilgis: 7 000 mm, bendras plotis: 3 000 mm, garantijos trukmė: 24 mėnesiai, temperatūra: 80 °C, oro poreikis: 36 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 345 kW (469,07 AG), galia: 40 kW (54,38 AG), kuras: suskystintos naftos dujos (LPG), energijos suvartojimas: 40 kWh, izoliacinė medžiaga: Mineralwolle, izoliacijos storis: 50 mm, nominali galia: 345 kW (469,07 AG), Įranga: apšvietimas, MAIN STANDARD Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. The processes in the booth are managed via a PLC system, ensuring that the desired parameters are consistently maintained. FUNCTIONAL PRINCIPLES OF THE BOOTH The processes within the booth are operated using a control panel that manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at external temperature. The air is then expelled through the extraction unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before release. FLASH-OFF PROCESS After painting, the booth continues operation for approximately 15 minutes to remove residual solvents and thinners. During this process, fresh outside air continues to circulate in the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and introduced to the booth via a distributor. As 20% of solvent is released during drying, it is expelled together with this exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted via the control panel as required. COOLING PROCESS After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates within the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of the machinery and devices installed in the booth. The panel is constructed from durable galvanized sheet and steel profiles, and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel includes essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for booth relocation if necessary. Iaedpfx Ajwzmcbob Sep • Operating equipment runs on 380 V 50 Hz, while control units use 220 V. • Booth operating time can be monitored on the electronic control panel for easy maintenance tracking. • Temperature and time settings for paint flashing, intermediate drying, and final drying can be easily adjusted via the digital display on the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.