Strypų tiektuvai

LNS 3.11HS-4.4

Būklė: naudotas, Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MV0009-001573, X ašies eiga: 762 mm, Y ašies eiga: 435 mm, Z ašies eigos atstumas: 510 mm, nominali (akivaizdi) galia: 33 kVA, bendras svoris: 5 000 kg, įvesties srovės tipas: trifazis, Doosan DNM 400 – Vertikalus apdirbimo centras. CNC frezavimo staklės tiksliam metalo apdirbimui. Tinka gręžimo, frezavimo ir sriegimo operacijoms. Patikimos ir tikslios, idealiai tinka pramoniniam naudojimui. Lrsdpfx Asy Exg Hslrep

Gamybos metai: 2005, būklė: paruoštas naudoti (naudotas), Tank capacity: 775 l, max. batch weight: 100 kg, heating power: 26 kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660 mm / 480 mm / 338 mm, fine filtration tank 1/2: 100 µm / 50 µm. Machine dimensions X/Y/Z: approx. 1850 mm / 1400 mm / 1800 mm, weight: approx. 950 kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling, and oil separation with coalescence separator unit and oil collection container. Documentation available. On-site inspection possible. Ljdpfx Ajwr Dxhelrjrp

Būklė: naudotas, TECHNICAL DATA - Number of Axes: 7 MILLING SPINDLE - Tool Holder: HSK40 - Spindle Speed: 30,000 rpm LINEAR AXES - Travel X/Y/Z axes: 450/270/310 mm - Rapid Traverse Speed (X/Y/Z): 75 m/min SWIVEL AXIS B - Travel Range: -20/+90 degrees - Minimum Resolution: 0.001 degrees TOOL CHANGER - Tool Changer Type: Parapluie (umbrella type) - Magazine Capacity: 40 tools TURNING SPINDLE - Spindle Speed: 8,000 rpm - Max. Bar Diameter: 32 mm Lredpeuhbr Tofx Alrjp - Minimum Resolution C-axis: 0.001 degrees - Travel Range: 360 degrees ELECTRICAL SUPPLY - Supply Voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1500 x 2600 mm - Machine Height: 2300 mm - Machine Weight: 2850 kg OPERATING HOURS EQUIPMENT - Control System: Siemens 840 D - 3-color Status Light

Būklė: naudotas, Gamybos metai: 2012, X-axis travel: 630 mm Y-axis travel: 800 mm Z-axis travel: 750 mm Control: SINUMERIK 840D sl Siemens B-axis: 360° x 0.001° A-axis: -200° to +25° x 0.001° Spindle speeds - stepless: 20 - 18,000 rpm Drive power, 100% duty cycle: 28.00 kW Drive power, 40% duty cycle: 34.00 kW Torque at 40% / 100% duty cycle: 110 / 84 Nm Tool holder: HSK 63 Feed rate X/Y/Z axes: 1 - 100,000 mm/min Rapid traverse X/Y/Z: 100.00 m/min Feed force X/Y/Z: 9 / 6 / 9 kN Feed rate B-axis: 1 - 14,400 °/min Feed rate A-axis: 1 - 7,200 °/min Pallet size: 2x 500 x 500 mm Maximum workpiece weight: 400 kg Maximum workpiece diameter: 800 mm Maximum workpiece height: 800 mm Tool magazine with 63 positions Maximum tool diameter: 280 mm Maximum tool length: 550 mm Maximum tool weight: 15.00 kg Lodovxwxvjpfx Alrjrp Total connected load: 65.00 kW Machine weight approx.: 14.00 t Space required approx.: 5.50 x 3.50 x H3.20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage monitoring, and emulsion mist extractor. Machine was part of a production line, therefore supplied without chip conveyor and without coolant system.

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled Ledpfxjuhauys Alrorp - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor system KNOLL VRF 500 - Workpiece evacuation with conveyor at position 6

Būklė: geras (naudotas), Barfeeder LNS Lodjr Iygiepfx Alrerp

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, veikimo valandos: 4 500 h, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 090119, Country of Manufacture: CE - Germany Voltage: 400V Net Weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h, Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm B-axis rotary position: 0.0001 – 360° C1/C2-axis rotary position: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum workpiece weight: 5 kg TURRET HEAD Number of positions: 24 Number of controlled positions: 18 Number of fixed positions: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16x16 mm (20x20) Max. turret head movement above tool tip: 500 mm Rotating tool speed: 1–9,000 rpm SPINDLE Maximum spindle speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR MACHINING Maximum bar length (bar feeder): 1,000 mm Maximum workpiece size for bar gripper: Ø42 x 100 mm Maximum gripper diameter: 42 mm Clamping cylinder tensile and compressive force: 20,000 N FEED Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse X/Y/Z axes: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Performance Values) Chip conveyor immersion pump output: approx. 10 l/min at 4.5 bar / 80 l/min at 3.2 bar / 150 l/min at 0.7 bar High-pressure pump output in conveyor: 10 l/min at 13.2 bar / 50 l/min at 9 bar / 90 l/min at 1 bar Lubricant volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROL: Siemens 840D WORKING PRECISION Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Accuracy: 0.6 µm Maximum run-out error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor axes X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulics return stroke: 0.75 kW Lodpfxeht Hg Ds Alrerp Cooling unit fan 1 / 2: 0.18 kW Circulating pump (cooling unit): 1.1 kW Cooling unit compressor: 2.2 kW Chip ejector: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Operating voltage: 400 V Mains frequency: 50 Hz (60 Hz optional) Control voltage: 24V DC Total power: 35 kW Rated current: 63A Connection: Network TM / TT / IT PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Solenoid voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 as per Pneurop 6611 NOISE EMISSIONS Normal operation: 78—80 dB Technical data subject to change or error, information provided without obligation. Inventory No. 2321018, Machine consisting of: - Chip conveyor - Preparation for bar feeder Tool holders: 6 fixed drill holders ER32 8 turning tool holders 5 driven tool holders ER32 4 driven tool holders ER25 6 driven tool holders ER20

Būklė: naujas, DM100 ZC – Performs edge rounding and removes sharp burrs on both inner and outer edges of steel, stainless steel, or aluminum parts after laser-cutting, shearing, or punching of metal parts from a minimum size of 50 x 50 mm up to 1100 x 100 mm. Ljdpfx Aled Hinterjrp The first station processes the products with a contact roller (approx. 55° Shore) and abrasive belt, removing heavy burrs in the initial step. The second station is equipped with two counter-rotating cross-belts with abrasive blocks, rounding the edges of the entire product, both inside and outside, in a second step. A key advantage is deburring products with surface protection film, as only the edges are processed without damaging the film. Technical data – DM1100 ZC: Working capacity (Ø mm): 1100 x 100 No. of belt stations (Z): 1 No. of cross-belt stations: 1 Abrasive belt, dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230 x 2300 x 2250 Weight (kg): 3300

Būklė: dilaminuotas dirbtuvėje (naudotas), CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" Equipped with Siemens 810 Powerline CNC control Year of manufacture: 2010 Travel paths: X 635 mm Y 510 mm Z 460 mm Spindle speed range: 20 – 8,000 rpm, infinitely variable Including the following accessories: - Rigid angular table, 790 mm x 560 mm clamping surface - Vertical tool changer with 20 magazine stations - Electronic handwheel Ljdpouqmvkofx Alrsrp - Heidenhain TT 140 tool length measuring system - Fully enclosed cabin with sliding doors and interior lighting - Coolant system - 4-color signal lamp - Chip conveyor - Chip rinsing gun - 3 pcs. height-adjustable machine feet - Operating manuals

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled Lrodpfjuhatpsx Alrjp - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled, with counter-spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - CNC SIEMENS 840D - Counter-spindle - Polygon turning attachment: slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal system - Parts ejector - Fire protection system: KRAFT UND BAUER * Note: Functionality not guaranteed. Must be inspected by a qualified company engaged by the buyer.