CNC daugiabriaunių automatinių tekinimo staklių staklės

INDEX MS 32 C

Būklė: naudotas, CNC daugiavelenis tekinimo automatas INDEX MS32C Iodpfxoxma Nps Aauetf

Būklė: naudotas, Gamybos metai: 2013, Swing diameter . mm Turning length 2000 mm Control system: Siemens 840 D sl Main spindle: Max. speed 3800 rpm Main spindle: Max. torque 1200 Nm Quill diameter 140 mm Centre point: MK6 Quill force 5 - 30 kN Itodpevu E R Sofx Aauef Feed rate Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 t The machine can still be inspected under power at the seller's facility. It is in good condition, and the turning accuracy is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6300 rpm - Machine equipped with 32 numerical axes - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: fixed X axis, Z axis CNC-controlled - Slide unit 2.1: fixed X axis, Z axis CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: fixed X axis, Z axis CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: fixed X axis, Z axis CNC-controlled - Slide unit 5.1: fixed X axis, Z axis CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled - Slide unit 6.2: X and Z axes CNC-controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - Bar loader: IEMCA SIR MS32/33/P Itodpfxouhaxle Aauof - Oil unit with high-pressure pump - Chip conveyor: KNOLL - Workpiece removal with conveyor at position 6 - Cross drilling units at positions 3.1 and 4.1

Būklė: naudotas, CNC daugiavelenis tekinimo automatas INDEX MS32C Iodpjxt U Hpefx Aauetf

Gamybos metai: 2019, būklė: paruoštas naudoti (naudotas), A Spinner simultaneous turning center with three turrets and a comprehensive range of accessories, spare parts, and tooling is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5000rpm, spindle nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: turret stations: 3x12, speed: 8000rpm, tool interface: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27,102h, control: Fanuc 31i. Includes Top Automazioni bar feeder, 80 bar coolant/high-pressure system, chip conveyor, fire extinguishing system, an extensive tooling package, and further spare parts. Documentation available. On-site inspection possible. Itjdpfx Aoua E Trsausf

Būklė: naudotas, CNC multi-spindle automatic lathe INDEX MS 32 C Ijdpouhaqbefx Aauetf

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6 independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6300 rpm - Machine equipped with 32 numerical axes - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: fixed X axis, Z axis CNC-controlled - Slide unit 2.1: fixed X axis, Z axis CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: fixed X axis, Z axis CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: fixed X axis, Z axis CNC-controlled - Slide unit 5.1: fixed X axis, Z axis CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled - Slide unit 6.2: X and Z axes CNC-controlled - Counter-spindle in position 6.1 EQUIPMENT Ijdpfx Ajuhangsaustf - Control system: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder - Oil supply unit with high-pressure pump - KNOLL chip conveyor - RIEDEL cooling unit - Finished parts removal with conveyor at station 6 - Cross drill unit at positions 3.1 and 4.1

Būklė: labai geros būklės (naudotas), Tacchi HD/1450 X 4M Didelė veleno skylė (515 mm) Metai: 2002 Siemens CNC valdymas Sukimosi diametras virš staklių pagrindo: 1450 mm Sukimosi diametras virš staklių vežimėlio: 1000 mm Itedpfxexg Ivdj Aauof Veleno kiaurymė: 515 mm Patronai galvutės priekyje ir gale Sūkių diapazonas: 1,5 – 450 aps./min Svoris tarp centrų: 15 000 kg Baruffaldi 4 padėčių automatinis įrankių laikiklis 2 x 3 taškų lunetos

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: Iodpfx Aasuxft Esustf -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 1994, Technical Details: Number of spindles: 8 Spindle bore: 32 mm Item: cam-controlled multi-spindle automatic lathe Brand: Schütte Model: AF32 S DNT Year of manufacture: 1994 Eight-spindle automatic lathe with 8 main spindles Max. nominal through-bore D=32mm Control: Siemens SIMATIC S7 electronic cam switchgear Balluff Gripper at station 8 for rear-side machining CNC cross-slide at position 6 CNC cross-slide at position 7 Workpiece conveyor belt Coolant system Schimpke Chip conveyor with magnetic separator Thread-cutting clutches Displayed tool equipment may differ from delivery scope! Please contact us for further information and images via mail(at) or Iedpfxol Su Rxs Aaustf *