CNC daugiabriaunių automatinių tekinimo staklių staklės

INDEX MS32C

Būklė: naudotas, CNC daugiavelenis tekinimo automatas INDEX MS32C Itjdpfxoxma Nps Aausf

Būklė: naudotas, Gamybos metai: 2013, Swing diameter . mm Turning length 2000 mm Control system: Siemens 840 D sl Main spindle: Max. speed 3800 rpm Main spindle: Max. torque 1200 Nm Isdpfjvu E R Ssx Aaujtf Quill diameter 140 mm Centre point: MK6 Quill force 5 - 30 kN Feed rate Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 t The machine can still be inspected under power at the seller's facility. It is in good condition, and the turning accuracy is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Būklė: naudotas, CNC daugiavelenis tekinimo automatas INDEX MS32C Iodpfx Aasxt U Hpsuotf

Būklė: naudotas, CNC multi-spindle automatic lathe INDEX MS 32 C Itsdpeuhaqbefx Aauof

Būklė: labai geros būklės (naudotas), Tacchi HD/1450 X 4M Didelė veleno skylė (515 mm) Metai: 2002 Siemens CNC valdymas Sukimosi diametras virš staklių pagrindo: 1450 mm Sukimosi diametras virš staklių vežimėlio: 1000 mm Veleno kiaurymė: 515 mm Patronai galvutės priekyje ir gale Sūkių diapazonas: 1,5 – 450 aps./min Svoris tarp centrų: 15 000 kg Itedpfsxg Ivdjx Aauef Baruffaldi 4 padėčių automatinis įrankių laikiklis 2 x 3 taškų lunetos

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled Itsdpsuhauyjfx Aauef - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor system KNOLL VRF 500 - Workpiece evacuation with conveyor at position 6

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6 independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6300 rpm - Machine equipped with 32 numerical axes - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: fixed X axis, Z axis CNC-controlled - Slide unit 2.1: fixed X axis, Z axis CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: fixed X axis, Z axis CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: fixed X axis, Z axis CNC-controlled - Slide unit 5.1: fixed X axis, Z axis CNC-controlled - Slide unit 5.2: X and Z axes CNC-controlled - Slide unit 6.1: X and Z axes CNC-controlled - Slide unit 6.2: X and Z axes CNC-controlled - Counter-spindle in position 6.1 Ijdpfouhangsx Aauetf EQUIPMENT - Control system: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder - Oil supply unit with high-pressure pump - KNOLL chip conveyor - RIEDEL cooling unit - Finished parts removal with conveyor at station 6 - Cross drill unit at positions 3.1 and 4.1

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: Itedpfx Aouxft Esaujf -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Su dviem apdirbimo moduliais, X ašis: -50 iki 725 mm, Y ašis: -200 iki 300 / -250 iki 250 mm, greitas judėjimas X, Y, Z ašyse: 18/12/30 m/min, valdymas: Siemens Sinumerik, temperatūros diapazonas: 5-40°C, srovės tipas/dažnis: 3 PEN/50 Hz, vardinė įtampa: AC 400V, valdymo įtampa: DC 24V, pagalbinė įtampa: AC 230V, prijungimo galia: 102 kVA, vardinė srovė: 148A, vardinė srovė (greita): 148A, saugiklis (lėtas): 160A, ilgis: 8000 mm, plotis: 3000 mm, aukštis: 4000 mm, svoris: apie 17 t, darbo valandų skaičius: apie 80 000 h. Mašina visiškai veikianti, Z ašies rutulinio sraigto pavarą (aplinkinis sraigtas) atnaujinta 2024 m., reguliariai prižiūrėta. Su dokumentacija, valdymo spintele, hidraulikos agregatu, filtravimo elementais ir drožlių transporterių. Galima apžiūra vietoje. Ijdpfx Aswbuyzeaujtf

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Schütte AG20 multi-spindle automatic lathe Itsdpfehrihysx Aaujf