LIGNUMA MM-700 dviejų galvučių pjūklas

LIGNUMA MM-700/2

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, The machine is in very good condition, has seen little use, and comes with full equipment. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL TYPE 1225 AC (angled cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Cast wheel width: 130 mm Wheel diameter: 1200 mm Raising/lowering – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase brake motor Electric motor for raising/lowering: 11 kW Blade PV 45 length: 8685 mm, thickness: 1.2 mm, width: 140/150 mm Feed drive with electronic solutions for blade forward/back – SEW reducer with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor adjustment of cutting thickness with electric shut-off Digital cutting thickness adjustment with Wravor V280 program Hydraulic unit 40 L, tank with two pumps 13+6 L + 3 kW motor Complete hydraulic system Hydraulic blade guide left and right HIWIN LINEAR Nwsdpfx Adow E Ei Us Ujp Hydraulic pre-cutter / bark scoring cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guider Side-mounted control panel Multifunctional joystick with 2 positions: 1 Multifunctional joystick with 4 positions: 1 Laser: 15 mW Cameras: 3 Fan: 2.2 kW + 15 m sawdust duct + 4 pipe supports Water cooling – automatic cooling hydrofor (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel greasing TRACK Welded construction, 14 m length Hydraulic clamp with two cylinders: 6 Hydraulic log turner: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter on brackets – mechanical roller: 4 Hydraulic log lifter on brackets – hydraulic roller: 7 Set of lifting cylinders: 7 hydraulic + 4 m: 1 Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 L, tank with one pump 50 L, motor 15 kW + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile carrier for ventilation – 4 double trolleys Belt discharge conveyor 4 m with 1 m feed segment + electric motor 3 kW, front section with hydraulic lift

Gamybos metai: 1999, Sąlyga: naudotas, The DSG 200 vertical sawmill is the ideal option for woodworking facilities specializing in furniture and wooden flooring production; it is efficient and performs reliably in operation. A used Wintersteiger mini sawmill is a very sound investment. A major advantage of this machine is that it does not take up as much space as standard equipment of this type, while still excelling in material processing. It is used for cutting individual elements and matching them to the desired sizes. The machine is easy to operate and can be mastered quickly. The greatest asset of our sawmill is its extensive equipment, featuring primarily a blade spraying system controlled from the panel, enabling precise cutting of wet material. It features independent adjustment of the upper rollers’ height, allowing for quicker cutting height settings. Pneumatic feed pusher assists the feed process. TECHNICAL DATA: -Total power: 27.3 kW -Air Jet system motor: 2.3 kW -Siemens control panel -Feed rate up to 2 m/min -Sawmill frame stroke: 210 mm -Strokes per minute: 400 -Cutting height: steplessly adjustable (smoothly) on our frame: 45–250 mm -Maximum achievable cutting height: 400 mm! -Cutting width under side pressure: 80–205 mm -Minimum block length: 250 mm -Lamella thickness: from 1.5 mm – depending on wood type and cutting height -Kerf for used blades: 0.9–1.1 mm depending on cutting height -Length: approx. 5000 mm -Width: approx. 1300 mm -Height: approx. 2600 mm -Weight: 5000 kg Pneumatic feed pusher assists the feed process The machine is supplied with: -Complete large saw blade frame -Small saw blade frame -Frame pins -Frame tensioning wedges Nwsdpotvm Hdjfx Ad Uep -Blade spacers -Blades for wet cutting -Blades for dry cutting -Set of upper feed rollers -4 lower feed rollers -Set of slides -Frame yokes -Pocket cutting guides -Loading magazines -DTR documentation -Electrical diagram

Sąlyga: naudotas, Gamybos metai: 1999, mašinos/transporto priemonės numeris: 99T318, PERTICI UNIVER 330IP DOUBLE MITRE SAW – CE STANDARDS – USED - Cutting length: 3300 mm Nwodpfxoqmpnaj Ad Uop - Power: 4.5 kW - Blade diameter: 330 mm - Double mitre with blade dust extraction - Voltage: 380V / 50Hz - Serial no.: 99T318 - Year: 1999

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Longitudinal profiling machine for parquet flooring Nwedpfovxz Syex Ad Uop 4+4 motors Minimum working width: 80 mm M+F profile (Tongue & Groove)

Sąlyga: naujas, Main features of the machine: The TOP CUT 500 band saw offers high-quality features and extensive capabilities, particularly for companies involved in wood processing on various scales. The machine provides unparalleled stability and solid construction. - Touch panel with electronic cutting height display - Control panel located at the front for easy and convenient operation - Cutting thickness electronically controlled and programmable - Cutting unit lifted on two motor-driven pistons - Infeed and return belt driven by a hydraulic variator - Hydraulic saw blade tensioning system - Pneumatic saw blade lubrication Nsdpfx Adoiim Tqj Ujwp - Pneumatic pressure roller system ensures precise guidance - Stable steel machine frame guarantees precise operation - Cutting accuracy and repeatability up to 0.01 cm Technical specifications: Maximum workpiece dimensions: 520x300 mm Transport belt width: 495 mm Transport belt length: 5535 mm Maximum cutting height: 300 mm Minimum workpiece height: 5 mm Saw wheel diameter: 711 mm Saw wheel width: 45 mm Dust extraction nozzle diameter: 100 mm Feed speed: 0 - 13 m/min Blade dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380 V Main motor power: 18.5 kW Total power: 21.5 kW Weight: 2400 kg Dimensions: 2800x2400x2000 mm

Sąlyga: naujas, Gamybos metai: 2024, slėgis: 8 juosta, Mitre adjustment horizontal 15°–90°–15° continuously variable, Saw motor 5.50 kW (400 Volt), Saw blade 600 mm, travel range rear stop 180 mm, working height adjustable from 940 to 1000 mm via leveling feet, 2 x extraction connections (top in hood and bottom), net weight 600 kg, dimensions (W x D x H): 135 x 140 x 150 cm, RAL 9007 grey aluminium. Turntable made from ground nickel-steel. Saw head with ball-type linear guides, offering high accuracy, long service life, and maximum rigidity. Saw material can be pre-clamped under low pressure when the hood is open. Hydropneumatic blade feed. Chip removal directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment continuously variable at 0º/45º/90º/–45º/–60º • Including 2 pneumatic clamps (vertical) • Saw blade feed infinitely adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device • Mist spray unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in scope of delivery! Our NC pusher system ensures that your workpieces are positioned at the desired processing position on our UK 600 HA 90°. A gripper clamps the material, and the NC control positions the material automatically. The clamping and sawing process is then triggered. The positions are programmed into the controller beforehand. Once the machine has finished processing, it automatically moves to the next saw position. Depending on the workpiece, multiple parts can be clamped side by side or stacked and positioned simultaneously. You are welcome to inspect the system at any time in our manufacturing or demonstration hall. Please feel free to contact us for more information. Nwodsgwt S Topfx Ad Usp Plantec Maschinen GmbH

Sąlyga: naujas, Gamybos metai: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Nedpfx Adshw Ng Io Uswp Work table inclined at 8° Technical specifications of the saw unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400/50 Hz. TCT blade diameter: 500 mm, F=30 Z=144 S=4.6 Cutting cycle time: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for bundle weight up to 80 kg Maximum push feed system speed: 90 m/min Pneumatic lift of pusher at the end of the cutting cycle and overhead return. Data input management: 12-inch TOUCH SCREEN controller (800x600 Pixels) USB port Ethernet port LINUX operating system Loading and saving machine parameters via USB port Edit cutting cycle (pattern) and enter directly at the controller Transfer cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of the stock length Partial optimization without measuring the panel length Cutting cycle with 3 optimization options (maximum length, sequence, and board order) 1000 cutting lists with 11 sizes each, or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length measurement via photocell Cutting cycle: with 6 optimization criteria (longest length, sequence, board order, volume, minimal waste, and priority length) "OPTI PLUS" package: overall optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects during timber mapping Marking with fluorescent chalks (Note Ð Only available in combination with ZA250) Pneumatic side clamping device

Sąlyga: naudotas, Complete sawmill, currently only available for sale as a whole. Reservations for individual components are possible at any time. The sawmill consists of: 01. Log infeed, 3-strand, Mayrhofer – with singulator – with feeder – Total length: 8 meters – Width: 3.5 meters 02. Fully hydraulic carriage by Mayrhofer – with auxiliary carriage – with rails – Track gauge: 90 cm 03. Frame saw Pini & Kay FN65 HH – Passage width: 650 mm – Drive motor: 33 kW – with saw blades – with hanger – with transmission – with splitting wedge – with chip scraper conveyor 04. Frame saw roller conveyor with 3 draggers and steep conveyor – Length: 8.5 meters – Width: 1.8 meters – Roller width: 1.6 meters 05. Drag table, 4-strand – Length: 4.5 meters – Width: 2 meters 06. Steep conveyor, 4-strand – Conveyor length: 3.6 meters – Width: 3.8 meters 07. Double edger Paul KME 2 – Zero line left – Right-hand machine Nsdpfxewptuyj Ad Uswp – Drive motor: 22 kW – with 2 under-table cross-cut saws – with hydraulic roller lifting – with hydraulic width adjustment – with stripper separator – with drag table / cross conveyor for trimmings – with main product hoist – with conveyor belt – with spiral roller conveyor – with manual box sorting (10 boxes/trollies) 08. Sharpening room consisting of: – Gang saw sharpening machine Vollmer CNHV (1978) – Set device Loroch SGB 6 (1983) 09. Dry kiln Vanicek – Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m – External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Location: Austria, near Vienna

Gamybos metai: 2016, Sąlyga: paruoštas naudoti (naudotas), Cutting capacity at 90°: Round material: 260 mm; Flat material: 300 mm / 260 mm; Saw band length: 4640 mm; Saw band width: 34 mm; Saw band thickness: 1.1 mm; Cutting speed: 140 m/min; Power: 4 kW; Machine dimensions (L/W/H): approx. 2500 mm / 2300 mm / 1500 mm; Weight: approx. 1500 kg. Includes roller conveyor stand. Documentation available. On-site inspection possible. Nwedpfxev Np Uqo Ad Usp

Sąlyga: naujas, Pressure: 60 t Stroke: 380 mm Nsdpji A S I Ijfx Ad Ujwp Table surface working width: 750 mm Pressure: 259 bar Oil capacity: 38 dm³ Approach speed: 2.87 mm/sec Working speed: 9.5 mm/sec Return speed: 12 mm/sec Total power requirement: 2.2 kW Machine weight approx. 540 kg Cylinder inner diameter [mm]: 170 Piston rod diameter [mm]: 75 Piston base diameter [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Height-adjustable working table - Joystick for moving the piston up/down The 60-ton workshop press features a fixed cylinder and a motorized height-adjustable worktable. It is equipped with pressure regulation, pressure gauge, dual-speed hydraulic unit, and a joystick for moving the piston up and down. The joystick allows for precise piston control, making this hydraulic press ideal for precision tasks.