Paviršiaus šlifavimo staklės

LGB R900

Sąlyga: labai geros būklės (naudotas), TECHNICAL SPECIFICATIONS Capacity: Table diameter: 3,000 mm Maximum turning diameter: 3,110 mm Maximum workpiece weight: 20 tons Spindle speed: 1.5–39.5 rpm Main motor power: 45 kW Crossrail travel: 1,200 mm Height under crossrail: 1,800 mm Vertical lathe with two rams: Right carriage with pentagonal 5-position turret, automatic indexing X-axis travel: 1,500 mm Z-axis travel: 965 mm Left carriage with RAM X-axis travel: 1,500 mm Dodsr Ddu Dspfx Admjwf Z-axis travel: 1,200 mm Remarks: Independent control panel 2 x Fagor 8055 CNC for controlling both carriages from a single screen Grinding head (optional) Year of manufacture/rebuilding: 1975/2001

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Travel paths X/Y/Z: 900 x 400 x 200 mm Table size: 800 x 400 mm Djdpov Irwrsfx Admewf

Sąlyga: naudotas, Gamybos metai: 2007, Maximum gear diameter: 2000 mm Workpiece diameter: 2700 mm Table diameter: 1500 mm Maximum module: 22 Control system: 840D Rotational speed: 3.5 rpm Maximum table load: 20,000 kg Center distance: 70...1220 mm Stroke length: 30...330 mm Strokes per minute: 10...200 spm Total power requirement: 138 kW Machine weight approx.: 38 t Space requirement approx.: 11x5 m Djdpfov E R Eiex Admewf Machine: Full CNC machine with electronic hobbing synchronization for C and D axes and digital INDRAMAT drive technology. Self-rigid welded machine bed construction. Radial axis (X-axis) with hardened guideways, sliding guide with wrap-around, Longitudinal guide with recirculating roller shoes. Precision ground, preloaded ballscrew with backlash-free preloaded nut. Digital AC drive technology with backlash-free gearbox. Linear measurement system for radial positioning. Free-standing machine table with electrohydraulically backlash-free preloaded twin worm gear, segment gear diameter 1365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Table bore diameter 500 mm continuous, open at the bottom. Water-cooled digital AC servo motors. The machine must be installed on a foundation. Column: Machine column as highly rigid cast construction for 1200 mm axial travel. Axial axis (Z-axis) with hardened guideways, sliding guide, longitudinal guide and wrap-around with recirculating roller shoes. Precision ground ballscrew with backlash-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shaping Head: SK 4.1 with hydraulic NC servo drive for shaping spindle movement and gear cutting wheel lift-off, stroke length 330 mm, shaping spindle diameter 160 mm. Hydrostatically mounted shaping spindle, straight and side guidance of the lift-off. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Number of strokes: 10 - 200 spm, stroking speed: 5 - 45 m/min. Shaping spindle speed for working and return stroke can be programmed independently. Spindle speed is constant in the cutting area. Maximum gear cutting wheel speed: 10 rpm, digital AC drive technology. Gear cutting wheel lift-off direction can be manually reversed for internal and external gear cutting. Shaping spindle axis can be manually adjusted up to 50 mm off machine center to avoid return stroke collision of the gear cutting wheel.

Sąlyga: geras (naudotas), Gusseiserne Bettplatte – Richtplatte Djdoh Auahspfx Admewf Nutzfläche (L x B x H): 3600 x 1200 x 300 mm 4 T-Nuten: Breite 44 x 26 mm Mit Nivellierfüßen ausgestattet Gewicht: ca. 3 t

Gamybos metai: 1993, Sąlyga: paruoštas naudoti (naudotas), Vertical Turning Center Dörries Scharmann Model: VCE 2000/160 Pallet size: 1,600 mm Pallet load capacity: max. 8,000 kg Number of pallets: 13 units Table indexing: C-axis 0.001° Table cross travel (X): 2,300 mm Column longitudinal travel (Z): 1,500 mm Crossbeam positions: 9 steps of 100 mm Feed rate X/Y/Z: 1 – 6,000 mm/min Dwjdpfxeguk S So Admef Rapid traverse X/Y/Z: 8 m/min Max. turning diameter: 2,000 mm Max. workpiece height: 1,500 mm Main Spindle Spindle drive motor: 69 kW Spindle speed: 2.8 – 315 rpm ATC for turning: 59 positions - System 240.2 Live spindle – SK50 Spindle drive motor: 30 kW Spindle speed: 10 – 1,500 rpm ATC for SK50: 61 positions CNC control: Siemens Sinumerik 880M Accessories: - FMS with 13 pallets - 2 rotary loading stations - Coolant unit with filtration system - Coolant through spindle Machine weight: Approx. 40 t Year of manufacture: 1993 (See also further offers from this seller)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, x-travel 14,000 mm y-travel 5,000 mm z-travel 1,500 mm w-axis 3,000 mm Column clearance 4,000 mm Portal stand: distance table – spindle nose 4,500 mm Workpiece weight 100 t Table size – longitudinal 9,000 mm Dsdpsvwgm Hefx Admowf Table size – cross 3,000 mm Spindle taper ISO SK 50 Spindle speeds 2–2,500 rpm Spindle drive 113 kW Spindle diameter 200 mm Spindle torque 9,500 Nm Feed range x-axis 1–10,000 mm/min Feed range y-axis 1–10,000 mm/min Feed range z-axis 1–10,000 mm/min Rapid traverse 20,000 mm/min Height above floor 8,600 mm Control SIEMENS 840C Machine weight approx. 360 t >>>retrofitted 2011

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, X ašies eiga: 6 000 mm, Y ašies eiga: 3 500 mm, Z ašies eigos atstumas: 1 600 mm, Gamintojas: ZAYER, Tipas: 30 KCU 6000-AR Pagaminimo metai: 2013 Serijos Nr.: 77257 5 ašių -45° universali galva - Tiesi galva Judėjimo eiga (X/Y/Z) apie 8000/3500/1600 mm, Dodpfx Adew U E Unemowf Įrankio laikiklis SK50 8 vietų įrankių keitiklis Valdymo pultas HEIDENHAIN iTNC 530 Drožlių konvejeris TECNIMETAL Aušinimo agregatas EURO COLD Stalinis DEMMELER Aušinimo skysčio sistema Apsauginė tvora su šviesos užtvara LENZE

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1998, mašinos/transporto priemonės numeris: 2183, X ašies eiga: 500 mm, Y ašies eiga: 300 mm, veleno greitis (maks.): 60 000 aps./min, veleno greitis (min.): 9 000 aps./min, ruošinio svoris (maks.): 300 kg, bendras aukštis: 3 250 mm, X ašies padavimo greitis: 2 000 m/min, Y ašies padavimo greitis: 2 000 m/min, stalo plotis: 380 mm, stalo ilgis: 600 mm, stalo apkrova: 300 kg, bendras svoris: 4 500 kg, W ašies eiga: 450 mm, Įranga: dokumentacija / vadovas, THIS MACHINE IS SOLD EXCLUSIVELY WITHIN THE EU - THANK YOU FOR YOUR UNDERSTANDING! Item type: CNC Coordinate Grinding Machine Manufacturer: HAUSER Model: S35-400 Year of manufacture: 1998 Machine number: 2183 Condition: According to the previous owner and a Hauser specialist, the machine is in good condition Delivery terms: Free on truck, loaded Availability: Immediately (by arrangement) Location: Magdeburg Technical Data: - Control: GE Fanuc Series 16-M - Tool holder: Collets EX 19 or grinding arbors E19 - Travel paths X / Y / W axes: 500 / 300 / 450 mm - Feed rate X & Y axes: 0 – 2000 mm/min - Approximate feed rate W axis: 900 mm/min - Table dimensions: 600 x 380 mm - Max. table load: 300 kg - Grinding spindle speed, stepless: 9,000 – 60,000 rpm - Z-axis stroke speed, stepless: 0.5 – 14,000 mm/min - Fire extinguishing system - Further technical data – see images Scope of delivery: - Grinding motor 60S (9,000 – 60,000 rpm) – see separate images - Extraction system - Coolant device - Dressing turbine - Available manuals - The clamping devices shown in the pictures and the currently installed grinding motor are NOT included! Dimensions & Weights: - Installation dimensions (L x W x H) approx.: 4250 x 4000 x 3250 mm - Weight approx.: 4500 kg Should you have any questions or wish to arrange a viewing, please feel free to contact us. Additional notes: Dwjdpfswakqysx Admjf - The tool changer is not functional – according to the previous owner, it was never needed! - Upon request, we can offer transport to the destination. - The quoted price is net, plus VAT. - The goods are sold with exclusion of any warranty! - Sale is made exclusively to businesses! - Technical data without guarantee. - Subject to prior sale.

Sąlyga: geras (naudotas), Used boring machine Brand: Juaristi Model: MDR 75 Weight: 5,600 kg Motor power: 10 kW 2-axis FAGOR digital readout. Spindle diameter: 75 mm Longitudinal travel (X axis): 1,150 mm Vertical travel (Y axis): 700 mm Column traverse (W axis): 800 mm Quill travel (Z axis): 500 mm Dwsdpfxjh Ryc Hj Admsf Table size: 900 x 700 mm Speeds: 22–1,055 rpm Number of feeds: 9 (from 0.04 to 3 mm/rev).

Sąlyga: labai geros būklės (naudotas), Surface grinding machine SAACKE Grinding head with adjustable angle Dsdpehpqf Uefx Admewf