Automobilių plovykla

Laue Cleaning Technology GmbH HTW 1000 Basic

Būklė: paruoštas naudoti (naudotas), Operates according to the magnetic particle inspection method, with documentation and accessories; on-site inspection is possible. Fgodpfx Aoq Npf Ujc Dsa

Būklė: naujas, Gamybos metai: 2025, The automatic basket cleaning system XTON Smart Cleaner SC1000™ is made of stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial sectors and the automotive industry. The cleaning system is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA liquid, which, in combination with optimal temperature and pressure, effortlessly removes all types of contaminants. The system operates in a closed-loop circuit at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can optionally be thermally insulated to prevent rapid cooling of the liquid. The Smart Cleaner SC1000™ offers high cleaning quality, saves time and energy, and ensures safe and convenient operation. The cleaning unit is designed for the automatic removal of contaminants from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ comply with the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Sensors for liquid level and temperature - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-liter starter pack) TECHNICAL DATA: - Weight: 200 kg - Exterior dimensions – Open chamber (W x D x H): 150 x 120 x 250 cm - Exterior dimensions – Closed chamber (W x D x H): 150 x 120 x 140 cm - Diameter of rotating basket: 100 cm - Load capacity of rotating basket: 300 kg - Adjustable working time: 0 – 99 min - Washing/fluid temperature: up to 80°C - Heating power: 9 kW - Tank capacity: 300 L - Tank volume to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V Fgjdpfju R Urhex Ac Doa - Safety features: temperature sensor, emergency stop switch, limit switch - Protection rating: IP 54 - Declaration of conformity: CE

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 3 000 kg, Didžiausias rotoriaus svoris --- 3000 kg (6613,87 lb) Mažiausias rotoriaus svoris --- 30 kg (66,14 lb) Didžiausias rotoriaus skersmuo --- 1400 mm (55,12 in) Mažiausias veleno skersmuo --- 20 mm (0,79 in) Didžiausias veleno skersmuo --- 300 mm (11,81 in) Variklio galia --- 11 kW (14,75 AG) Pavaros įrenginys (standartinis) --- 11 kW (14,75 AG) Balansavimo greitis --- 0-3000 aps./min (25 Hz) (reguliuojamas aukštyn/žemyn) Fgedpfxer Dd Avj Ac Dja Pavaros įrenginys --- Tik diržas arba velenas / Diržas + velenas Staklių lovos ilgis --- 3000 mm (118,11 in)

Gamybos metai: 1991, būklė: beveik kaip naujas (naudotas), bendras svoris: 1 420 kg, sukimosi greitis (maks.): 1 485 aps./min, 3 pieces stainless steel volute casing pump in process design 2 x CPK-CM 250-315 Year of manufacture: 1991 1 x CPKN-C1 250-315 Year of manufacture: 2011 !!! Price per unit !!! Pumps were operated on a test bench and all have very few operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Head / Discharge pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: single-acting mechanical seal with barrier water Manufacturer: Burgmann Impeller type: closed radial impeller Impeller diameter: 324 mm Bearing type: rolling bearings Lubrication: oil Oil level monitoring: oil level regulator Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: tempered steel C45+N Impeller: 1.4408 (AISI 316) Fedpfxoqabias Ac Dsga Bearing support lantern: cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Baseplate: painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power P2: 75 kW Thermal class: F Motor protection rating: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Būklė: naudotas, rida: 173 900 km, pirmoji registracija: 11/2000, bendras svoris: 12 500 kg, kuro tipas: dyzelinas, spalva: oranžinė, ašių konfigūracija: 2 ašys, pavaros tipas: mechaninis, emisijos klasė: Euro 3, Gamybos metai: 2000, Įranga: ABS, kompresorius, oro kondicionavimas, priekabos jungtis, visų varančiųjų ratų pavara,

Gamybos metai: 1987, būklė: geras (naudotas), - for forklifts 1.5 – 4 t - Own weight 1,400 kg Fodpfxofxxy Hs Ac Doga - Push and pull capacity 300 t

Gamybos metai: 2002, būklė: labai geros būklės (naudotas), Product-contact parts are made of stainless steel 1.4571, the remaining parts of the used mixer-dryer are constructed from 1.4301. Machine designation: Continuous horizontal used mixer-dryer Manufacturer: AVA / Holland Merten GmbH Model: HTK 200 Year of manufacture: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Design: EExdellCT4 Total capacity: 235 liters Product-contact parts: Stainless steel 1.4571 Features: Double jacket, mechanical seal (sliding ring seal) Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1,600 kg Technical documentation: Yes Fodpfsitcu Ejx Ac Doga Note: Operating temperature 130°C, design temperature 200°C, internal mixer pressure -1/+3 bar, double jacket pressure +6 bar Accessories: Base frame Condition: Used Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, We are offering a top-quality 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection and comes complete with all necessary cables. Please note that the PC is password-protected, but the software is included on CD. Included are various sensor heads with the following measuring volumes: - Set 175x140 - Set 350x280 - Set 550x - Set 1000x800 The package also comprises a complete GOM PC in an aluminium case, with Linux software pre-installed—fully operational for use with the GOM ATOS IIe. Software is provided on CD, along with steel scale bars and an ATOS evaluation dongle. Also included are a spare lamp and a calibration panel (aluminium) CP20/MV 350x280mm². Fjdsw E I Itopfx Ac Doga

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4012M-4212, matavimo diapazonas X ašis: 900 mm, matavimo diapazonas Y ašis: 1 000 mm, matavimo diapazonas Z ašis: 600 mm, ruošinio svoris (maks.): 1 200 kg, Įranga: Tipinė plokštelė prieinama, Techniniai duomenys: Staklių tipas: Mitutoyo STRATO 9106 FAL-A910 Pagaminimo metai: 2001 Matavimo sritis: 900 x 1000 x 600 mm Programinė įranga: Mitutoyo Software v2.4.R11 Fjdpfxeqz T H Ae Ac Djga Priedai: Jutiklio laikiklis: Renishaw SP80 Jutiklis: Renishaw SP80 Papildomi priedai: keraminis kalibravimo rutulys, įvairūs jutiklio rutuliai ir prailgintuvai, Renishaw keitimo stovas, tvirtinimo komplektas su 4 x SCP80 ir jutiklio laikikliu Pasiliekama teisė keisti techninius duomenis, padaryti klaidų ar parduoti įrangą anksčiau nenurodžius!

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, The universally deployable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser is now indispensable in many industries. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and minimal programming knowledge. Serial and article numbers are automatically incremented by the software after prior configuration. Furthermore, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it into predefined areas. It is also possible to use a handheld scanner. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are also possible. Made in Germany Fiber laser 30 W, 20 W or 50 W • Laser class 1 • Wavelength 1064 nm • Marking field size 150x150 mm (larger optional) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: autofocus system – system for automatic determination of focal distance • Optional: extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus setting) • Signal light for operating status display Fjdpfx Aeu Smd Eoc Dsga • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard holder • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg