šoninių kanalų pūstuvai

LANCO 2125.04

Sąlyga: naujas, The new vacuum pump is available from stock and ready for immediate use. We recommend that installation is carried out only by trained personnel. Adaptation materials available upon request. Oil fill: without Technical data: Credpfxsttzxre Admsk 2.7 kW 3 x 230/400 V 50 Hz 1500 rpm Oil return into non-return valve housing Gas ballast Incl. level switch Final pressure: 0.1 mbar Interim sale reserved! This offer is valid only for customers within Germany and other European countries!

Sąlyga: naujas, *TECHNICAL SPECIFICATIONS:* Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (L x W x H): 1,414 x 503 x 1,350 mm (without connections when using constant bypass) Weight: approx. 225–320 kg Codpfx Adjg Ey Rfemork Heat transfer fluid connection: Flange DN25 PN16–40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS:* – Control and regulation unit: smart controller (7'' touch display) – Heating control via solid-state relay – Switch cabinet IP54 – Cooling managed by solenoid valve – Flow measurement based on differential pressure principle – Bypass between supply and return line with reduced cross-section – Level monitoring by magnetic float switch – Flow monitoring by measuring heating element surface temperature and flow rate – Dirt filters in cooling water inlet and in the return flow of the circulation system – Monitoring of supply temperature by electronic safety temperature limiter – External oil filler neck – Dilo fittings on internal pipe connections (except pump connections) – At 350°C: constant bypass including bellows valves – Connection for nitrogen blanketing with pressure gauge and safety valve (0.5 bar at 350°C) (option) Visit our website for more details or for different performance classes. *The unit is compliant with European directives. Other directives and standards are only considered fulfilled if stated in the order confirmation. This technical specification represents the standard equipment; customer requirements deviating from the standard will be shown in quotations and/or order confirmations.*

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, padavimo eiga Y ašimi: 6 000 mm, Tipper tray for logs up to 6 m in length. Available from September 2024. Cjdper Iig Dofx Admerk

Gamybos metai: 2025, Sąlyga: naujas, ProdMa Sp. z o. o. specializes in stainless steel processing and configures stainless steel machines according to the customer's requirements and capacities. Efficiency, high productivity, and excellent customer communication are our top priorities. Accordingly, we orient ourselves to the existing machines on the market, analyze and optimize problem areas to ensure complete customer satisfaction. Here we offer the CB-80: Height: 2,000 mm Width: 1,120 mm Length: 4,890 mm Weight: approx. 800 kg Cjdsrci U Hspfx Admjrk Power supply: 50 Hz, 360 V Power consumption: 1.64 kW Air consumption: 1 m³ / 10 bar / 1 min Peeling capacity: 40-80 pieces/min Peeling diameter: 35-100 mm (unsorted onions)

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals renewed. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Crsdpfsiuznuex Admsk Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine engineering

Sąlyga: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* Cedpfog Ezarjx Admsrk - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition Cedpfxorigxyj Admerk

Gamybos metai: 1991, Sąlyga: beveik kaip naujas (naudotas), bendras svoris: 1 420 kg, sukimosi greitis (maks.): 1 485 aps./min, 3 pieces stainless steel volute casing pump in process design 2 x CPK-CM 250-315 Year of manufacture: 1991 1 x CPKN-C1 250-315 Year of manufacture: 2011 !!! Price per unit !!! Pumps were operated on a test bench and all have very few operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Head / Discharge pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: single-acting mechanical seal with barrier water Manufacturer: Burgmann Impeller type: closed radial impeller Impeller diameter: 324 mm Bearing type: rolling bearings Lubrication: oil Oil level monitoring: oil level regulator Csdpeqabiaofx Admork Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: tempered steel C45+N Impeller: 1.4408 (AISI 316) Bearing support lantern: cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Baseplate: painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power P2: 75 kW Thermal class: F Motor protection rating: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Sąlyga: naudotas, Hydraulic power unit, hydraulic pump, universal unit Credpfx Adef Tdt Ismek - Manufacturer: H+L, hydraulic power unit for hydraulic punching machine - Type: DK52 1-6-250P-391K - Motor: Junginger 5.5 kW / 1455 rpm - Pressure gauge: up to 250 bar - Pressure accumulator: Hydac 2.5 liters - Hydraulic tank/filter/valves: see photos - Dimensions: 540/630/H1210 mm - Weight: 198 kg

Gamybos metai: 2023, veikimo valandos: 11 h, Sąlyga: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: MA0144_1922, Exhibition unit: Kaeser SX 8 Screw Compressor (10 bar) with SIGMA Control 2 Year of manufacture: 2023 Operating hours: 1 h Technical data: Free air delivery at 7.5 bar: 670 l/min Motor power: 5.5 kW Electrical connection: 400 V / 3 phase / 50 Hz Dimensions (W x D x H): 590 x 632 x 970 mm Weight: 155 kg Compressed air connection: G 3/4" Sound pressure level: 64 dB(A) Visit our showroom in Erlangen. Csdpoh Ey Rcefx Admerk On more than 450 sqm of exhibition space, you will find a wide selection of used and new compressors.