Lovos tipo frezavimo staklės

Lagun Goratu GTM 3

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system Kjdpfxsxmhdne Abrswu - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Pressure 105 t Bending length 3100 mm Distance between uprights 2600 mm Table width 100 mm Table height 750 mm Control system DELEM DA 65 Installation height 200 mm Working speed 0 - 10 mm/sec Return speed 0-100 mm/sec Rapid traverse upward max. 100 mm/sec Power supply 380 V / 50 Hz Total power requirement 11 kW Machine weight approx. 7.5 t Space requirement approx. 4 x 2.2 x 2.8 m Equipment: - CNC control DELEM DA65 graphic video - Controlled back gauge, 2 axes - New lower tool - Two-hand control / foot switch Kwodjvq R Uuepfx Abrsu

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of live tool positions: 5 - Driven tool speed: 5,000 [rpm] Kwedpsuhazgjfx Abrju FRONT TOOL POST - Number of positions: 4 SUB SIDE MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] DIMENSIONS AND WEIGHT - Installation space: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Sąlyga: geras (naudotas), Gamybos metai: 2004, veikimo valandos: 77 711 h, X ašies eiga: 650 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, valdiklio modelis: Heidenhain iTNC530, greitasis eiga Z ašyje: 45 000 m/min, greitas poslinkis X ašimi: 45 000 m/min, greitas poslinkis Y ašis: 45 000 m/min, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Hermle C30 U Siemens 840D Mašinos įjungimo laikas: 77711 val. Spindulio įjungimo laikas: 16294 val. - HSK-A63 10000 min-1 velenas - 32 įrankių vietos - SRT 280 mm apvalus stalas su integruota fiksavimo sistema SK50 (jei nereikalinga, galima uždaryti arba perkonstruoti į nulio taško fiksavimo sistemą) - Išorinis aušinimo skysčio padavimas - Vidinis aušinimo skysčio padavimas su popieriniu juostos filtru 80 bar - Drožlių nupūtimo pistoletas - Drožlių transporter - Rankinis valdymo modulis - Automatinės kabinos durys - 32 įrankių vietos plius dar 87 ZM87 vietos - Terminė kompensacija - BLUM įrankių matavimo sistema šone - Renishaw matavimo jutiklis Kedpfsxcp R Iox Abrowu - Drožlių konteineris - Būsenos šviesos indikatorius Mašina visiškai patikrinta, yra geometrijos protokolas ir apskritimo tikslumo bandymų matavimai. Mašiną galima bet kada apžiūrėti ir išbandyti įjungtą. Labai gerai prižiūrėta būklė.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermal Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Maximum Pressing Force: 4000 kN - Maximum Uplift Force: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 seconds Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Maximum Opening Width: 800 mm - Stroke: 800 mm - Table Height above Floor: 1,100 mm - Total Height above Floor (Construction Height): approx. 4,300 mm - Minimum Hall Height: 5,500 mm Parallelism Deviation at 20°C: +/- 0.1 mm Deflection: Kwjdjph Uk Njpfx Abreu - Determined at maximum closing force with 70% utilization:

Gamybos metai: 2012, Sąlyga: geras (naudotas), Muratec MW120 GT eladó Használt, kiváló állapotban. A gép előzetes egyeztetés alapján megtekinthető. A szállítás a vevő felelőssége, de igény esetén segítünk a csomagolásban és a rakodásban. Kwjdpfx Absifi D Tjrsu Szállítás: EXW Székesfehérvár

Sąlyga: geras (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, GEBRAUCHT Soraluce Soramill Modell SP 10000 Portalfräsmaschine, Tischtyp, mit CNC-Steuerung, Verfahrsäule, automatischem ölnebelschmierten orthogonalen Fräskopf mit 1 x 1 Grad Indexierung und HEIDENHAIN TNC 430 M Steuerung. Baujahr 2002, SN 8647. Tischfläche: 10.000 x 1.100 mm X-Achse (Längsverfahrweg): 8.500 mm Y-Achse (Vertikalverfahrweg): 1.600 mm Z-Achse (Ram-Verfahrweg): 1.200 mm Spindelmotor: 28 kW Spindelaufnahme: Standard ISO 50, BT50 Zugbolzen: DIN 69872-Form A, ISO 7388/2-Form A Unabhängiges 2-stufiges Getriebe Drehzahlbereich: 20–4.000 U/min Vorschubbereich: 5–5.000 mm/min Kwjdpfx Asr Hr Arjbreu Eilgang (X, Y, Z): 15.000 mm/min Präzisions-Kugelgewindetriebe mit vorgespannten Doppelmutter-Systemen in allen Achsen. Linearführungssystem mit umlaufenden Zylinderrollen und Stahlführungsbahnen in X-, Y- und Z-Achse Unabhängige AC-Servomotoren pro Achse Wegmesssysteme (Glasmaßstäbe) in X, Y und Z mit Luftspülsystem Automatische Werkzeugklemmung und hydraulisches Werkzeugwechselsystem CNC-Steuerung: HEIDENHAIN TNC-430-M (Flacher TFT-Monitor, digitale Antriebe) 9 Achsen CNC, 1 Spindel, davon 5 Achsen simultan interpolierend Arbeitsbereichsbeleuchtung Klimatisiertes Schaltschrankkühlsystem Schaltschrankinnenbeleuchtung Heidenhain HR410 Fernbedienung mit 3m Spiralkabel Horizontal schwenkbares Bedienpult für CNC Orthogonalkopf 28 kW, 800 Nm, 1° x 1°, 4.000 U/min Ölschmierung. Preis inkl. Öl-Kühleinheit für Kopf und Getriebe. Option G2 (Ram für 4.000 U/min vorbereitet) enthalten. Spindelkühlsystem (AD-Typ) integriert. Kühlsystem mit 500l-Tank, zwei Pumpen für Niederdruck (3 bar) und Hochdruck (8 bar), Förderleistung 50 l/min, inkl. kombinierter Papier-/Magnettrommelfiltereinheit. Bedienerplattform fest an der Säule verbaut Werkzeugmagazin für 40 Werkzeuge, BT50 Max. Werkzeuglänge: 400 mm Max. Werkzeugdurchmesser: Voll bestückt = 120 mm, mit Nachbarfach frei = 250 mm Max. Werkzeuggewicht: 20 kg Mittleres Werkzeuggewicht (voll bestückt): 10 kg Maximales zulässiges Gesamtgewicht: 20 kg Späneförderer / Scharnierbandförderer Maschinenvorbereitung für die Nachrüstung eines 4. Achsen Elektro-Mechanik-Drehtisches Spritzschutz an der Stirnseite und beiden Seiten des Tisches, bestehend aus vier verschiebbaren Fronttüren (Höhe ab Boden 2.100mm, Länge je 1.700mm). Türen manuell bedienbar, mechanische Verriegelung, öffnen über gesamte Längsverfahrstrecke möglich. Tischrückseite offen. Schutzverkleidung an der Rück- und beiden Längsseiten der Maschinensäule.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 000 mm, Y ašies eiga: 1 700 mm, Z ašies eigos atstumas: 1 500 mm, Heidenhain 530 Įstrižinė frezavimo galva su 2,5° x 2,5° indeksavimu Sūkių skaičius iki 6 000 aps./min Kwsdpfxsx I A Hvs Abrsu Įrankio tvirtinimas SK50 Vidinis aušinimas 36 bar Drožlių transporteris išilgai ir skersai

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0728, X = 5,000 mm Y = 1,025 mm Z = 1,100 mm / horizontal Z = 1,000 mm / vertical - NC swiveling head continuously adjustable +/- 105 degrees as a CNC axis for horizontal and vertical machining, indexing accuracy +/- 5 arcseconds - Heidenhain iTNC530 control, hard disk with approx. 21 gigabytes available for user data - Motor spindle HSK100, speed range 20-8,000 rpm, drive power 44 kW, 350 Nm - NC rotary table SKH 4/630 Faceplate horizontal Faceplate diameter 630 mm Standard overall height 300 mm Indexing accuracy +/- 12 arcseconds Maximum load 900 kg Max. tangential torque at 63 bar: 2400 Nm Including motor (AC) with integrated rotary measuring system and hydraulic clamping, incl. additional CNC axis - NC rotary table SKH-NC 9/1450 Kwjdpsxgnfxefx Abreu Faceplate horizontal Faceplate diameter 1450 mm Indexing accuracy +/- 12 arcseconds Without direct measuring system Maximum load 5,000 kg Max. tangential torque with clamping: 16,000 Nm Including motor (AC) with integrated rotary measuring system and hydraulic clamping, incl. additional CNC axis Special enclosure for rotary table diameter 1450 mm included Swing diameter 1500 mm No turning operation possible! - 60 tool stations - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system for NC rotary table Indexing accuracy +/- 5 degrees - Direct linear measuring systems X, Y, Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting, 6-fold - Installation elements - 3D probing system with wireless connection - Tool probing system for measuring and checking cutting tools in the machine, TT140 - Zero-point clamping system Unilok ESM 130 36 pcs integrated in the machine table 16 pcs integrated in rotary table faceplate with diameter 1450 mm 4 pcs integrated in rotary table faceplate with diameter 630 mm

Sąlyga: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swiveling 120° Cutter speeds 70 - 400 rpm Axial feed rates 0.25 - 4.0 mm/rev Radial feed rates 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Kodovzhf Sopfx Abrjwu Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation