Kundig Premium-1 1100-C

Kundig Premium-1 1100-C

Būklė: naujas, Gamybos metai: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander including Intermediate Paint Sanding Configuration Special Price for Showroom Model - Trade Fair Machine - - Robust, space-saving wide belt sander for the highest demands - Consistent working height thanks to top section adjustment - Working width: 1350 mm - Top sanding, equipped with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller according to a sanding grit scale - Electric raising/lowering of the contact roller according to selected aggregate - Electronically controlled segmented sanding pad - Complete sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at infeed - Rubber-coated pressure roller between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Pneumatic belt tensioning, control, and oscillation Compressed air consumption approx. 2 l/min - Optimum safety due to automatic instant stop with disc brake in the event of belt breakage, etc. - Workpiece feed: 2.2 kW with transport belt and drive roller - Vacuum system for the entire worktable with additional 200 mm perforation for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with instant feed stop and automatic lift - Stepless regulation of material removal - Electronic feed speed control at the operator panel, stepless 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automated quick setup and feed release - Eco energy-saving mode - Fault diagnosis - Pass-through height 210 mm up to 18.5 kW Isdpfxjk Dpp Sj Aauoar - Sanding belt dimensions: 1350 x 2000 mm Perfect - Features: High quality, swiveling plexiglass control panel - 10" Touch Screen - Industry controller - Automatic pressure regulation and memory function of the sanding pad segments - Electronic compensation for sanding belt grit size - Job and operating hour counters Lacquer Configuration - Stepless adjustment of the sanding belt speed on the 2nd aggregate - Nozzles for automatic sanding belt cleaning on the 2nd aggregate - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without plate) C10) LED package ASB5+AS3) ECS workpiece air blast system with fan Location: 54634 Bitburg - Immediately available -

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: 85382, UNIVERSALES BEARBEITUNGSZENTRUM MAHO MH 800 C, Baujahr: 85382 Verfahrwege: X-Achse: 800 mm Y-Achse: 500 mm Z-Achse: 600 mm Arbeitstisch-Abmessungen: 900 x 625 mm Maximale Tischbelastung: 600 kg Spindeldrehzahl: 20 – 5.000 U/min, 15 kW Werkzeugaufnahme: ISO 40 Kegel Werkzeugmagazin mit 30 Plätzen Iedpfoldgf Hjx Aausar MAHO CNC-Steuerung Maschinenabmessungen (LxBxH): 3.350 x 2.520 x 2.500 mm Maschinengewicht: 6.200 kg Guter technischer Zustand Preis: 13.000 EUR zzgl. MwSt. Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch, Deutsch, Ungarisch, Französisch und Rumänisch.

Būklė: labai geros būklės (naudotas), Foot-operated, water-cooled rocker arm spot welding machine Manufacturer: DALEX Model: SF 16/71 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 17 kA Electrode force: 278 daN Arm reach: 180–500 mm Arm spacing: 140 or 300 mm with 8-step switch Asynchronous single-time welding control Sample photo Iasdpfxjimd I Ao Aauor Machine currently undergoing refurbishment Welding time: 3–100 cycles

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), For sale: Costa A1 ACT 1150 bottom sander, year 2001. Configuration: soft roller with electronic segmented pad. Working width: 1150 mm Abrasive belts: 1180 x 2620 mm Pressure rollers for short workpieces. Vacuum fan included. Air blast on both units. Iodpfx Aaegq U R Nouoar Total weight: 2500 kg Two motors: 7.5 kW and 15 kW Total power: 27 kW Very good condition, regularly serviced machine. Available immediately.

Gamybos metai: 1984, būklė: naudotas, mašinos/transporto priemonės numeris: 57051/4, Manufacturer: Rhode & Doerrenberg (May) Model: SS 40 U Serial No.: 57051/4 Year of Manufacture: 1984 Weight: 950 kg General Information / Technical Data: Iasdjc Nv S Aopfx Aaujr Used drill grinder from German production for 2-, 3-, and 4-flute tools, in good condition. Diameter range: 5 mm to 40 mm Tool length: 500 mm Point angle: 80° to 160° Relief angle: 1° 30' to 10° Grinding wheel: 210 x 127 x 50 mm (cup wheel) Tool body: 2-, 3-, and 4-flute drills and countersinks Grinding direction: Suitable for left- and right-cutting tools Machine dimensions (L x W x H): 1350 mm x 1100 mm x 1400 mm Power supply / Control voltage: 380 V, 50 Hz / 220 V Motor power / Total power: 2.2 kW / 2.55 kW Accessories / Special Features: • 2 grinding wheel mounts with grinding wheels • 8 collets for drill holder, Make: Forkardt • 6 Morse taper adapters & drill extensions • Coolant system • Machine documentation & electrical schematic Remarks: The machine is in our warehouse, connected to power, and can be demonstrated by appointment.

Būklė: naudotas, Sandingmaster calibrator, model CSB/2/900, equipped with roller and pad, 900 mm conveyor belt, roller motor approx. 11 kW, pad motor approx. 7.5 kW. Used. Iedpfxeiv Dauo Aaujar

Būklė: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main region and North Rhine-Westphalia). These enquiries will not be answered. Equipment and Technical Data: The Master delivers precision sanding, embodying the essence of our 75 years’ experience in sanding technology. This means it comes equipped—out of the box—with all the features essential for fast and reliable production of perfect surfaces. Nothing more, nothing less. The core Kündig Master model is fitted with a calibration roller and a sanding pad unit. Its proven construction guarantees decades of high-precision sanding, even across the generous working width of 1350 mm. Additionally, there is an integrated control unit for rapid and intuitive operation. Sanding Units – Proven Combination The sanding section uses the tried-and-tested combination of calibration roller and sanding pad. For safe workpiece feed, a parallel-sprung steel pressure roller is located at the machine infeed, while rubber pressure rollers are positioned between the sanding units. Calibration Unit (R): The calibration unit features a grooved rubber contact roller with proven hardness, ideal for calibration tasks and capable of handling high removal rates if required. The contact roller height is continuously adjustable to compensate for the thickness of the applied abrasive. Segmented Sanding Pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad (instead of a pneumatic system), with a sensor width of 35 mm. This allows for even greater precision when fine sanding workpiece edges. The edge pressure of the sanding segments is automatically regulated, but can also be finely adjusted using the touchscreen, allowing targeted sanding of workpiece edges. The graphite glide covering is also quick and easy to change. Iaodpfxow Naane Aaujr Summary of Features Construction: In terms of robustness and durability, the Master stands equal to our other model ranges. It features the same heavy-duty build quality that makes all our machines long-term investments, ensuring precise sanding results for many years to come. Upper Section Adjustment: For over 30 years, we have equipped our machines exclusively with upper section adjustment. Why? It is more complex to engineer than table adjustment, but it offers clear advantages: greater weight capacity for workpieces, consistent precision over time, and the benefit of a fixed working height. Workpiece Dimensions: The opening (clearance) adjustment of the upper section is motorized and finely controlled via touchscreen. Maximum workpiece height is 160 mm. With a 1350 mm working width, the Kündig Master provides the generous and proven industry-standard dimension.

Būklė: naudotas, Gamybos metai: 1983, Used machine Year of manufacture: 1983 Condition: fully inspected and serviced, incl. new feed belt Features and technical data: - Includes combination aggregate with contact roller and sanding pad - Height-adjustable contact roller for calibration - Air-cushion pressure pad controlled via the workpiece - 4-way adjustable grain compensation - Pneumatic belt tensioning device - Rotating cleaning brush at the machine’s outfeed side - Belt oscillation via photoelectric sensor for automatic monitoring and adjustment of the lateral belt position for uniform belt wear - Roller table at infeed - Digital display unit for electrically driven workpiece thickness adjustment Iedpfx Aajwka T Sousar - Additional veneer sanding beam - 2x spare sanding shoes included - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable: 2.5 - 12.5 m/min - Extraction nozzles: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Photos show the machine in its non-refurbished state! Availability: approx. end of January 2026 Location: Röllbach

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 0-411-49-1873, Technical Data: - Manufacturer: Bütfering - Model: Optimat SGO 211/RC - Number of sanding units: 2 - Year of manufacture: 2008 - Working width: 1,100 mm - Sanding belt width: 1,120 mm - Sanding belt length: 1,900 mm - Workpiece thickness: 3–160 mm - Feed speed: 2.5–13 m/min - Weight: 1,800 kg - Table height adjustment Standard Equipment: - Automatic workpiece thickness adjustment - Infinitely variable feed speed via frequency converter - Up to 125 sanding programs can be stored - Wear-free braking device 1st Sanding Unit (R) - Calibration drum - Profiled steel contact roller - Diameter: 160 mm - Drive motor: 15 kW 2nd Sanding Unit (C) - Combination unit with roller and sanding shoe - Rubberized contact roller 65 Shore - Contact roller diameter: 160 mm - Electronic segmented pressure bar with 35 mm segment width - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz - Compressed air consumption at 6 bar: 20 L/min - Belt blow-off device per impulse: 440 L/min Isdpfeyh Hwuex Aausar - Extraction volume: approx. 2,880 m³/h at 20 m/s - Extraction connections: 1 x Ø 160 mm (sanding unit, roller) 1 x Ø 160 mm (sanding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Būklė: naudotas, Gamybos metai: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Constant working height - Equipped with combination unit featuring a steel contact roller and electronic CPS segmented pressure beam with 25 mm intervals - Working width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: stepless, 2.5 - 13 m/min - Sanding unit power: 11 kW Paint package: - Infinitely variable belt drive speed via frequency inverter - Belt blow-off device - Vacuum conveyor belt with blower Control system: - Terminal with 50 program memory slots - User-friendly menu navigation via plain text display Isdpfjwka Snox Aauear - Visual display of active components during operation - Fully automatic PLC-controlled start-up sequence for all drives - Digital work time recording Includes cleaning brush Roller table at infeed Roller table at outfeed Extraction capacity: 1850 m³/h Extraction ports: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection: 6-8 bar Air consumption: 10 l/min Weight: 2200 kg Availability: by arrangement Location: Röllbach