Vejapjovė
Kuhn GMD 9530 FF

Name: Kuhn GMD 9530 FF
Brand: Kuhn
Availability: InStock

Gamybos metai

2023

Sąlyga

Naudotas

Vieta

Prüm

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Vejapjovė

Gamintojas:: Kuhn

Modelis:: GMD 9530 FF

Gamybos metai:: 2023

Sąlyga:: naudotas

Kaina ir vieta

Pardavėjo vieta:: Rudolf-Diesel-Str. 6 (Gewerbegebiet), 54595 Prüm, Vokietija

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A8041172

Nuorodos Nr.:: 49196-6621

Naujinta paskutinį kartą:: Data 2025.07.09

Aprašymas

Rear-mounted, disc mower, butterfly combination_____Technical data: Working width: 9.53 - 9.13 meters (in combination with front mower, depending on cutting overlap)Transport height: 3.92 metersCutting overlap with the front mower: 30-50 cm (with GMD 3125 F) / 50-70 cm (with GMD3525 F)Cutter bar: OPTIDISC ELITENumber of mower discs with tempered steel disc protection skids: 2 x 8Wear plate for the skids: 2, standardCutter blade attachment: With FAST-FITE knife quick-release fastenerAdjustable cutting height with the standard skids 35-65 mmDisc shaft overload protection:PROTECTADRIVEBottom adjustment: Center suspension of the mower unitAdjustment of the relief: Hydropneumatic relief LIFT-CONTROLAncollision protection: NONSTOP collision protectionLift for swath crossing: Through integrated hydraulic deviceAverage swath width: 2 x 2.80 metersSwathing disc: ExternalAttachment: Three-point linkage Cat. 3PTO shaft speed: 1,000Freewheel: Integrated in the side gearboxesPTO power requirement for the triple combination: 99 kW / 135 HPRequired hydraulic connections on the tractor: 2 double-acting control units (+ front mower required)Required electrical connections on the tractor: 1 seven-pole electrical connection and 1 three-pole ISO electrical connectionLighting system with warning signs - at the rear of the machineWeight: 2,300 kgPicture serves as an example,Storage location:null
Hsdpjizp Aysfx Af Iofb

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Registruota nuo: 2017

73 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 6551 ... skelbimai

Faksas:

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

München

1 152 km

PITNEY BOWES DI425
Pitney BowesDI425

3 490 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Low-mileage envelope inserting machine with the following configurations: - 2 feeder stations for unfolded documents with large capacity (325 sheets) Hfjdpfsiyx Ixox Af Ieb - 1 feeder station for inserts with large capacity (300 inserts) - 1 feeder station for envelopes (DIN long, C6/5, C5 and other formats) - Daily mail function for up to 5 sheets - Can process extra-long documents - Paper length: 127–406 mm - Paper width: 127–229 mm - Envelope formats: DIN long, C6/5, C5 or 88x220 to 164x242 mm - "Flip-flop function": Automatic switching when a feeder tray is empty - Automatic double and misfeed detection - Automatic adjustment of fold lengths (no opening/adjustment necessary) - Automatic height adjustment for the address window - 4 folding types: single fold, letter fold, z-fold, double parallel fold - 20 programmable memory slots - Large display with graphic and text interface - Up to 8 sheets/envelope - Up to 3,500 cycles/hour - Counter reading: 249,103 cycles

Peržiūrėti detales

Mažas skelbimas

Krašto apvadų apipjaustymo mašina "Storti RM 500 Storti RM 500

Miechucino

387 km

Krašto apvadų apipjaustymo mašina "Storti RM 500
StortiRM 500

Skambinti

Sąlyga: labai geros būklės (naudotas), Storti RM 500 Edger - Italian manufacture - Year of manufacture: 1993 - Electrically adjustable saw blade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum workpiece width: 600 mm - Minimum material length: 800 mm - Maximum blade diameter: 600 mm - Spindle diameter: 40 mm - Two upper feed rolls - One upper pressure roll - Feed roll motor power: 2 x 1.1 kW - Feed rolls with automatic pressure adjustment - Seven lower driven toothed rollers - Electric adjustment of saw blades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive roller diameter: 100 mm Hfodsk Talpopfx Af Ieb - Feed drive motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3500 kg

Peržiūrėti detales

Mažas skelbimas

Aukšto stogo universalas Mercedes-Benz MB-Trac 1500

VELDDRIEL

1 284 km

Aukšto stogo universalas
Mercedes-BenzMB-Trac 1500

64 500 €

fiksuota kaina neįskaitant PVM

Skambinti

Mažas skelbimas

Dukart pusėje dydžio briaunų laminavimo staklės IMA Combima II/390/B/R3

Roreto

1 632 km

Dukart pusėje dydžio briaunų laminavimo staklės
IMACombima II/390/B/R3

Skambinti

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Hsded Nt Rqspfx Af Isfb Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness with veneer strips (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, without transmission bar (Master & Slave systems) Stop cams retractable, distance (mm): 1080 FORMAT PROCESSING (per side): Protective cutter (pre-milling) 75.186 (1 x kW 4.4) Chipping unit (2 x kW 8) Jointing milling unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): Gluing unit (hot melt adhesive) 283.1513 04.1570 + 283.205 Edge pressure zone – edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Peržiūrėti detales

Mažas skelbimas

AUTOMATINIS NUOLAIDIMO ĮDĖJIMO MAŠINAS WEEKE (HOMAG Group) PROFI BST 800

Roreto

1 633 km

AUTOMATINIS NUOLAIDIMO ĮDĖJIMO MAŠINAS
WEEKE (HOMAG Group)PROFI BST 800

Skambinti

Sąlyga: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER) Hjdegwbbqjpfx Af Ijfb

Peržiūrėti detales

Mažas skelbimas

Dukart pusėje dydžio & Edge Banding mašinų IMA Combima /II/230/A/R3

Roreto

1 632 km

Dukart pusėje dydžio & Edge Banding mašinų
IMACombima /II/230/A/R3

Skambinti

Sąlyga: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Hfsdpfx Aodh Tfgsf Isb Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Peržiūrėti detales

Mažas skelbimas

AUTOMATINIS DAUGIAFUNKCINIS "SAVAITĖS WEEKE (HOMAG Group) BST 500/D

Roreto

1 633 km

AUTOMATINIS DAUGIAFUNKCINIS "SAVAITĖS
WEEKE (HOMAG Group)BST 500/D

Skambinti

Sąlyga: labai geros būklės (naudotas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in a line alongside other machines. Control system: Power Control Hfedpfxsh Ryhne Af Ijb Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal drilling support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical drilling support (qty): 2 Spindles per unit of lower vertical drilling supports (qty): various Upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): 2 Spindles per unit of upper vertical drilling supports (qty): Upper vertical workpiece clamps (qty): 6 Chip removal conveyor Digital display of axis position data Total connected load (kW): 26

Peržiūrėti detales

Mažas skelbimas

IŠKELTI (VIENAS NARVIS) RBO (BIESSE Group) Tornado SC/FE 1300

Roreto

1 633 km

IŠKELTI (VIENAS NARVIS)
RBO (BIESSE Group)Tornado SC/FE 1300

Skambinti

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse transversely movable by 180° (horizontal) - Console table with vacuum clamps Hsdpfsd Tyvxex Af Isfb - Internal lifting platform with motorized sheet metal roller conveyor - Front protective fence, movable - Separate control cabinet and operator panel - External roller conveyor for stacking panels from destacking unit - External driven roller conveyor from destacking unit, also with belt for transfer at 90° angle of the panels - Operating capacity (cycles/min): 12-15 - Panel thickness (min/max) mm: 10 - 40 - Min. panel dimensions mm: 250 x 320 - Max. panel dimensions mm: 1200 x 3000 - Total connected load kW: 11

Peržiūrėti detales

Mažas skelbimas

Padėklų stovo šviesos santvaros lentyna Redirack 3.610 mm / K: 160 x 50 mm Fachlast: 3.500 Kg

Neukamperfehn

1 080 km

Padėklų stovo šviesos santvaros lentyna
Redirack 3.610 mm / K: 160 x 50 mmFachlast: 3.500 Kg

41 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: geras (naudotas), Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a used pallet rack beam from the manufacturer Redirack for sale. Technical data for the pallet rack beam: Racking system: Redirack The scope of delivery includes: 01x pallet rack beam, used Colour: orange Box profile: 160 x 50 mm Clear width: 3,610 mm Max. load per pair of beams: 3,500 kg (with evenly distributed load) 02x locking pins, used Version: fully galvanized For securing the longitudinal beams against accidental lifting Our services at a glance: (prices on request) Assembly and installation Please observe our general assembly conditions Racking inspection Racking inspections according to DIN EN 15635 carried out in accordance with the requirements of BGR 234 visual inspection for all types of racking systems Delivery with our own fleet Hfsdpfxjdyqg Eo Af Ieb (unloading not included)

Peržiūrėti detales

Mažas skelbimas

Dvipusis FORMAT ir EDGE GLUE MASK BIESSE Stream SB2 9.5

Roreto

1 633 km

Dvipusis FORMAT ir EDGE GLUE MASK
BIESSEStream SB2 9.5

Skambinti

Sąlyga: labai geros būklės (naudotas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Hjdpfx Afohvahho Ijfb Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and soundproof cabin Manual side adjustment of unit carrier Cam pitch (mm): 500 SIZING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW) 2 x hoggers DT 10 (5.8 + 5.8 kW) Spraying device (for liquid anti-adhesive) EDGEBANDING SECTION (for each side): Gluing unit (hot-melt glue + premelter) SP30 (High Melt + Edge Control EC 40) Edge pressure section (CNC controlled). Edge magazine for rolls (No. 6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°. PNEUMATIC Multi-profile milling unit (CNC controlled) RF 40 (1 kW x 2) 0 - 25° Multifunction unit (radius and form milling unit) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool changer (tools) 2 universal milling units for grooving, rebating, and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Peržiūrėti detales

Reklamuokite čia