Paviršiaus šlifavimo staklės

Kraft FS 16060 SD

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), Grinding area: 2000x900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle center: 845 mm, magnetic chuck dimensions: 2000x800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500x100x203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. An on-site inspection is possible. Bljdpfx Afouyk N Io Ajg

Būklė: naudotas, TECHNICAL DATA - Distance between centres: 650 [mm] - Centre height: 175 [mm] - Max. workpiece weight between centres: 80 [kg] - Travel X/Z axis: 285 / 800 [mm] - X-axis programmable feed rate: [mm/min] Bsdpfx Afjylc R Uo Aslg - Resolution: 0.0001 [mm] - Z-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Table swivel range: 0 - 8.5 [degrees] GRINDING WHEEL HEADSTOCK - T1 grinding wheel dimensions: 500 x 63 x 203.2 [mm] - Speed: 50 [m/s] - Power: 9 [kW] - Manual swivel range: -15 / +195 [degrees] - Minimum resolution: 2.5 [degrees] - Internal grinding speed: 40,000 [rpm] - Power: 3 [kW] WORKHEAD - Taper type: MT5 - Speed: 1 - 1500 [rpm] - Power: 1.8 [kW] - Bore diameter: 30 [mm] - Minimum C-axis resolution: +/- 0.5 [degrees] TAILSTOCK - Taper type: MT4 - Quill diameter: 50 [mm] - Quill stroke: 35 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 20 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,670 x 2,050 [mm] - Machine height: 1,900 [mm] - Machine weight: 4,000 [kg] MACHINE HOURS - Power-on hours: 190 [h] EQUIPMENT - Control: FANUC Oi-TD - Electronic handwheel - 3-color status lamp - Oil mist extraction system - Direct position measuring systems axes: X / Z - Dynamic grinding wheel balancing: MPM - Automatic touch detection: SENSITRON 6 - Fixed dressing device - Workpiece probe system - Coolant tank: 375 [l] * with paper filter

Būklė: labai geros būklės (naudotas), Grinding length without magnetic chuck: 1500 mm Maximum grinding width: 750 mm Longitudinal travel, X-axis: 1520 mm Cross travel, Y-axis: 650 mm Vertical travel, Z-axis: 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Weight: 8600 kg Accessories: Braillon magnetic chuck 1000 x 500 mm Electronic control: Elcon 3 Blodpfx Aewlh Adof Aog

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives. Bljdpfx Aouxfupsf Ajg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, X ašies eiga: 400 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 255 mm, bendras plotis: 1 990 mm, bendras svoris: 1 800 kg, valdiklių gamintojas: FANUC, valdiklio modelis: 31i-WB, ašių skaičius: 5, 2018 m. pagamintos vielos EDM staklės. Ši "FANUC Robocut alpha-C400iB" siūlo pažangias pjovimo galimybes. Jei ieškote aukštos kokybės vielos EDM pajėgumų, apsvarstykite mūsų parduodamas "FANUC Robocut alpha-C400iB" stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Galimybė apdoroti ruošinį: maksimalūs matmenys 730 × 630 × 250 mm; maksimalus ruošinio svoris 500 kg • Ašių eiga: U/V 120 × 120 mm • Galimybė apdirbti: maks. kūgio kampas ±30°/80 mm; mažiausias pavaros žingsnis 0,0001 mm; vielos skersmuo Ø0,10-Ø0,30 mm; maks. vielos ritės svoris 16 kg • Valdiklis: FANUC 31i-WB; dalies programos atmintis 4 MB • Akustinis triukšmas: LPA 64 dB; LPCpeak 81 dB • Papildomos specifikacijos: • Plonos vielos galimybė: vielos skersmuo Ø0,05-Ø0,07 mm • Automatinių priekinių durelių parinktis: maksimalūs ruošinio matmenys su automatinėmis durelėmis 730 × 585 × 250 mm • 45° matricos kreipiančioji parinktis: maksimalus kūgio kampas ±45°/40 mm • 30 kg vielos padavimo įrenginys pasirinktinai: didžiausias vielos ritės svoris 30 kg Bedsypma Iopfx Af Aelg • Įrengimo sąlygos: • Maitinimo šaltinis: AC 200V ±10%, 3 fazių, 50/60 Hz ±1 Hz; AC 220V ±10%, 3 fazių, 60 Hz ±1 Hz; jungiamojo kabelio gnybtų dydis 8-5; galios suvartojimas 13 kVA • Oro tiekimas: 0,5-0,7 MPa; 100-110 L/min (mažiausiai 120 L/min su plono laido parinktimi); reguliatoriaus pusės jungties montavimo varžtas Rc1/4 • Aplinka: 15-30 °C (rekomenduojama 20 ±1 °C, kai reikia atlikti labai tikslų apdirbimą); be alyvos rūko ir dulkių; drėgmė ≤75 % RH • Įžeminimas: C tipas; maksimali įžeminimo varža 10 Ω; turi būti įžemintas nepriklausomai nuo kitų mašinų • Ekrano patalpos reikalavimai: Jei elektros išlydžio triukšmas trukdo netoliese esančiai radijo, televizijos ar elektroninei įrangai, būtina įrengti ekranuotą patalpą.

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Max. output capacity: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic feed system, frame structure, level valve, inspection chamber, and documentation. Blsdjh Akm Tepfx Af Asg

Būklė: naudotas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m As a world-leading company for Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality and with warranty, but can also offer you comprehensive service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: Bsdpfx Afouwv H Hs Aolg - Complete machine overhauled according to Kellenberger measurement protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical cabling, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute encoder (for B axis) Standard Equipment: - Workhead with MK5 taper, optionally with MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing by ELASO integrated into control interface - BEMAT grinding wheel measurement Optional at extra cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece spindle - Measuring control - Extraction unit - Paper band filter Control: Basic Grinding Cycles - Workpiece zeroing with Z-position (longitudinal positioning) - Wheel measurement with BEMAT - Approach sensor GAP - Measurement of dressing diamonds - Corrections - External and internal cylindrical grinding (traverse and plunge grinding) - External and internal taper grinding (B axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional Grinding Cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Gamybos metai: 2008, veikimo valandos: 0 h, būklė: naujas, mašinos/transporto priemonės numeris: DW-A-414, Scanner 3D Dental Wings DW-5-140 An de fabricație: 2008 Număr de serie: DW-A-414 Accesorii într-o cutie – vă rugăm să verificați fotografiile, cabluri de conectare USB cu computer incluse. Nu se oferă cheie USB software, doar CD de instalare disponibil. Blsdpfxjhalgdo Af Ajg Iluminarea lămpii funcționează. Conectare necesară la PC • Funcționalitate detaliată netestată, detaliile sunt necunoscute. Putere: 100 W, Intrare: 100—240V, 50-60 Hz Stare: Alimentare ON ok, dar nefuncționat. Scannerul este nou, niciodată folosit. Preț: 1.300 Euro + TVA, FCA: Oradea/România Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim româna.

Būklė: naudotas, Gamybos metai: 2006, X eiga 1.250 mm Y eiga 1.000 mm Z eiga 1.000 mm Valdymas MillPlus B ašis (galva) -10 - +180 x 0,001° C ašis (stalas) 360 x 0,001° Pavaros greitis X/Y/Z ašyse 20 - 10.000 mm/min Greita eiga X/Y/Z ašyse 60,00 m/min Įrankio tvirtinimas HSK 100 Veleno sūkių dažnis (be pakopų) 20 - 10.000 aps./min Variklio galia 100% ED 25,00 kW Variklio galia 40% ED 38,00 kW Sukimo momentas 40% / 100% ED 288 / 187 Nm Stalo tvirtinimo paviršiaus Ø 1.100 mm Stalo apkrova 1,50 t Įrankių magazinas: grandininis magazinas 120 vnt. Įrankio skersmuo 110 mm Įrankio skersmuo laisvose vietose 230 mm Maks. įrankio ilgis 500 mm Maks. įrankio svoris 30,00 kg Stalo sukimosi dažnis be pakopų 10 - 500 aps./min Bendras energijos poreikis 85,00 kW Bodpeyui Ncofx Af Aolg Mašinos svoris apie 25,00 t Reikalinga erdvė apie 9,00 x 6,50 x H3,50 m 5 ašių tekinimo-frezavimo apdirbimo centras su MillPlus IT FD valdymu; dvigubas padėklų keitiklis; aušinimo sistema; aušinimo skystis per veleną; drožlių transporteriu; besisukantis stebėjimo langas; elektroninis rankinis ratas. Naujas velenas 10/25 Sukamasis stalas atnaujintas 2022 m.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Discover our selection of robust and precise bed-type milling machines! Are you looking for a reliable bed milling machine to boost your productivity? Experience unmatched precision and performance with our new and overhauled bed-type milling machines. Our machines offer X-axis travels from 1,500 to 5,000 mm and are available with Heidenhain or Siemens controls. With Y and Z travels up to 1,200 mm, you have limitless possibilities. Some overhauled machines are in stock and available at short notice! Explore our extensive range of special accessories, such as universal milling heads, tool changers, and much more to further enhance the versatility of your bed milling machine. Whether for complex workpieces or demanding tasks, our machines consistently deliver the best results. Rely on our many years of experience and let’s optimize your machining processes together. Invest in quality and precision—contact us today! Below you will find a selection of possible machine types; we are also happy to offer additional models or special machines upon request: MAIN TECHNICAL DATA: BFM series including BAFA grants starting from 15% or more! - X-axis travel 1,500–5,000 mm - Y-axis travel 1,000 mm - Z-axis travel 950 mm (up to 1,500 mm optional) Bedpfx Afjpwn Hhe Aelg - Max. table load 5,000 kg - Spindle taper SK 50 - Spindle speed 3,500 rpm (5,000 rpm optional) - Spindle drive 15/18.5 kW (22/26 kW optional) ACCESSORIES: Manual universal head, Siemens or Heidenhain control, linear scales on X-Y-Z axes, chip conveyor (screw type front/rear) and much more. Comprehensive special accessories available on request to further enhance productivity: CURRENTLY AVAILABLE OVERHAULED MACHINES with warranty and BAFA funding, e.g. - CORREA CF17D: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,000 / 800 / 800 mm, manual milling head, and more. - CORREA CF25/25: HEIDENHAIN TNC-530, travels (X/Y/Z): 2,500 / 1,000 / 1,500 mm, automatic universal head UAD (0.1º increments), 6,000 rpm, and more. - CORREA CF25/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,500 / 1,000 / 1,000 mm, automatic indexing differential head UAD (0.1º increments), 6,000 rpm, automatic tool changer (30 tools), and more. - CORREA PRISMA: HEIDENHAIN TNC-530, travels (X/Y/Z): 2,500 / 1,000 / 1,000 mm, automatic indexing milling head UDG40 (2.5º increments), and more. - CORREA CF22/25: HEIDENHAIN TNC-426, travels (X/Y/Z): 2,500 / 800 / 800 mm, manual milling head, and more. - NICOLAS CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3,000 / 1,200 / 1,000 mm, extended manual milling head (UL40), and more. - CORREA A30/30: HEIDENHAIN TNC-426, travels (X/Y/Z): 3,000 / 1,200 / 1,000 mm, universal milling head with automatic indexing UDG (2.5º increments), automatic tool changer (ATC30), and more. Further models available from stock or at short notice. Contact us now and discover the world of innovative bed milling technology! Our service for you: • On-site consultation and solution finding • Organization of machine transport to your facility • Placement, installation, commissioning, and hand-over ready for operation • Financing and assessment of grant opportunities with KFW, BAFA, and more.