Becentrė cilindrinė šlifavimo mašina

Koenig & Bauer Multimat 150-6

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GS1000/5-T, sukimosi greitis (maks.): 30 000 aps./min, bendras svoris: 15 500 kg, Pagaminimo metai: 2014 Būklė: labai gera Magazinas: 66 x HSK63 Valdymas: Heidenhain 530 Lsdpfx Asw Awmtjf Ijrg Velenas: n=30.000 Erowa nulio taško tvirtinimo sistema integruota stalo viduje Erowa robot easy 250 automatizacija su 6 padėklais 3D matavimo sistema Didelio dažnio veleno alyvos-oro tepimas Lazerinis matavimas Veleno darbo valandos:

Sąlyga: naudotas, Gamybos metai: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Lrsdpfx Aevav Sdsf Iog Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore: Ø 42 mm Tailstock quill taper: ISO MK4 Tailstock quill travel: 180 mm Total power requirement: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.4 x 1.0 x 1.7 m The lathe does not have a rapid traverse. Positioning over 2 axes Readout via Pinacho Lathe Controller Multifix toolpost with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Grinding wheel: 508x254 (305) mm, regulating wheel: 330x254 (305) mm, regulating wheel speed: 0–115 rpm, grinding wheel peripheral speed: 45 m/s, grinding diameter: 2–150 mm, grinding wheel drive: 45 kW, machine weight: 6.5 t, required installation space: approx. 3.0x1.5 m. Lrjdeuy Ifgopfx Af Ieg The machine will be fitted with a new Siemens S7 control system including new operator panel before sale. The dressing spindle (SS) is electrically actuated via a servomotor. The machine will be thoroughly inspected, with defective parts repaired or replaced. Various options available (coolant system, infeed/outfeed, workpiece guides, etc.).

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, X ašies eiga: 700 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 300 mm, greitas poslinkis X ašimi: 50 m/min, greitas poslinkis Y ašis: 50 m/min, greitasis eiga Z ašyje: 50 m/min, X ašies padavimo greitis: 10 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 20 m/min, valdiklių gamintojas: Brother, valdiklio modelis: CNC-B00, stalo plotis: 400 mm, stalo ilgis: 800 mm, stalo apkrova: 250 kg, veleno greitis (maks.): 16 000 aps./min, - Achsenanzahl: 4 FRÄSSPINDEL - Werkzeugaufnahme: BT30 - Spindelleistung: 7,4 / 4,9 [kW] - Spindeldrehzahlen: 16.000 [U/min] LINEARACHSE - Verfahrwege X/Y/Z: 700 x 400 x 300 [mm] - Eilgang (X/Y/Z): 50 / 50 / 50 [m/min] - Arbeitsvorschub (X/Y/Z): 10 / 10 / 20 [m/min] - Abstand Tisch / Spindelaufnahme (min./max.): 180 - 480 [mm] WERKZEUGWECHSLER - Automatik-Werkzeugwechsler: Schirm-Magazin (Umbrella) - Werkzeugmagazinkapazität: 21 - Werkzeugwechselzeit: 1,4 [sek.] TISCH - Tischgröße: 800 x 400 [mm] - Maximale Tischbelastung: 250 [kg] STROMVERSORGUNG - Betriebsspannung: 220 [V] - Gesamtanschlussleistung: 9,5 [kVA] GEWICHT & ABMESSUNGEN - Stellfläche der Maschine: 2.050 x 2.207 [mm] - Maschinenhöhe: 2.592 [mm] - Maschinengewicht: 2.400 [kg] Lodpsulwztofx Af Ierg AUSSTATTUNG - CNC-Steuerung: Brother CNC-B00 - Schnittstellen: Ethernet / USB - Drei-Farben-Statusleuchte - Vorbereitung für Roboterbeladung: rechtsseitig - Teilapparat: vollwertige 4. Achse * Hersteller: LEHMANN EA-510 * Verfahrweg 4. Achse: 360 [°] * Indexiergenauigkeit der 4. Achse: 0,001 [°] * Mittenhöhe: 150 [mm] - KÜHLMITTELTANK - Spindeldurchgehende Kühlung * mit Hochdruckpumpe: 15 [bar] - Späneförderer: Hinten HAKUSAN - Ölnebelabscheider: SARA UC1SD - Elektroschalttransformator: 400 / 220 [V]

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, lazerio galia: 12 000 W, plieno lakšto storis (maks.): 80 mm, žalvario lakšto storis (maks.): 80 mm, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, X ašies eiga: 1 550 mm, Y ašies eiga: 3 050 mm, Z ašies eigos atstumas: 290 mm, ruošinio svoris (maks.): 1 400 kg, įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, bendras ilgis: 9 100 mm, bendras plotis: 3 120 mm, bendras aukštis: 2 200 mm, garantijos trukmė: 24 mėnesiai, darbo diapazonas: 3 015 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, purkštukų keitiklis, Completely New Full-Cover Fiber Laser Cutting Machine | GS-CE/ GS-CE PRO Series | 3000–60000 W MACHINE IN STOCK AVAILABLE This FULLY ENCLOSED FIBER LASER CUTTING MACHINE from the GS-CE Series provides maximum safety when cutting metal. Thanks to the full enclosure and observation window made of protective glass, you can monitor the process while avoiding hazards such as laser radiation, sparks, etc. It is also equipped with a rapid exchange table, allowing for table changes in just 10 seconds. This will be your ideal solution for safe and efficient metal cutting! Working Table Sizes: 3000 mm * 1500 mm, 4000 mm * 1500 mm, 6000 mm * 1500 mm, 6000 mm * 2500 mm Laser Power: 6KW–80KW CNC System: FSCUT Max. Acceleration: 4G BOCI Cutting Head Intelligent Anti-Collision Feature Automatic Lubrication Schneider Relay Laser Fault Alarm Cooler Fault Alarm Laser Protection Glass Water Chiller TÜV CE Certificate Optional Feature: Automatic Loading and Unloading System Control Unit Supports Graphic Formats: AI, BMP, DST, DWG, DXF, DXP External Programming Complete system including chiller, extraction system, and safety light curtains Ljdpfx Afoub Nwds Ijrg Demo model in like-new condition

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, šlifavimo ilgis: 620 mm, plotis centre: 680 mm, šlifavimo disko skersmuo: 350 mm, bendras plotis: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine Lrsdpfxerz Nfls Af Ijg - Replacement of the X-axis feed screw - Replacement of the main bearings in the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to an as-new condition Geometry: - Scraping the X-axis guideway - Scraping the Z-axis guideway - Grinding the X-axis table - Grinding the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle head, grinding spindle head, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the remaining parts of the machine will retain the original paintwork Electronics: The entire machine's electronics will be checked and tested; defective switches and cables will be replaced

Gamybos metai: 2000, Sąlyga: geras (naudotas), CNC Surface and Profile Grinding Machine Manufacturer: Ziersch & Baltrusch Model: PROFITLINE ZB 62 NC Year of manufacture: 2000 Lrjdpfx Aofrbcksf Iog Grinding area: 600 x 270 mm Electro-magnetic chuck with continuous transverse pole division 600 x 200 mm, pole pitch = 4 mm Wet grinding system with automatic paper band filter, machine base tray. Complete machine documentation available.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Lrjdpfjb Ez R Ujx Af Ijg Overall height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, veikimo valandos: 1 000 h, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 380 mm, tekėjimo ilgis: 350 mm, tekėjimo skersmuo: 200 mm, X ašies eiga: 240 mm, greitas poslinkis X ašimi: 12 m/min, Hembrug Mill-Turn-Maschine Modell: Slantbed Mikroturn 100 CNC Siemens 840D Steuerung Ca. 1.000 tatsächliche Betriebsstunden Hydrostatische Spindel Hydrostatische Führungen Wegmesssystem Schwingend gelagerte Granitbett Granit-Spindelgehäuse Kühlmittelpumpe Kühlmittel-Umwälzpumpe Pneumatische Lagerreinigung Hydraulische Temperaturregelung Kühlmittel-Temperaturregelung Ljdpfjwcfgbsx Af Ijrg Rückölpumpe und -tank zur dezentralen Aufstellung der Hydraulik-/Kühleinheit. Optionen & zusätzliche Ausstattung: Reitstock Vakuumpumpe für Vakuum-Spannfutter Programmgesteuerte Sprühnebelanlage C-Achsen-Fräs-/Bohrfunktion Renishaw Werkzeugmesssystem (Taster) Berührungsloses Werkzeugmesssystem Eingangslufttrockner/-filter Werkzeugpaket im Wert von mehreren tausend Euro (fabrikneu): Mitlaufende Körnerspitze Reitstock-Aufnahmekonus-Adapter 8" Micro-Centric Pneumatik-Spannfutter 3 Sauter gerade angetriebene Werkzeughalter 2 Sauter 90° angetriebene Werkzeughalter 1 spezieller VDI-Versatzhalter 16 VDI-Werkzeughalter für Dreh-, Bohr- und Axialbearbeitung Videoüberwachung für Werkzeugaufnahme Zusätzliche Backup-Festplatte mit vorinstallierter und getesteter Software Zusätzliches Siemens-Bedienpult Kompletter Satz Betriebsanleitungen Nachgerüstete Maschinen-Upgrades (kostenpflichtig): Neue digitale Festplatte Neue Backup-Festplatte mit fertig aufgespielter Software – sofort einsatzbereit, keine Ausfallzeit Neue Z-Achsen-Heidenhain-Glasmaßstab Hydraulikpumpenmotor neu gewickelt – original war zu heiß für meinen Geschmack Bedienpult ersetzt (Monitor-Hintergrundbeleuchtung defekt, Originalbedienfeld vorhanden, nur die Beleuchtung müsste getauscht werden) 15 m verlängerte Kabelsätze zur dezentralen Aufstellung der Hydraulik-/Kühleinheit.

Sąlyga: naujas, Swing diameter: 560 mm Turning length: 1910 mm Swing diameter over cross slide: 355 mm Swing diameter in bed gap: 790 mm Centre height: 280 mm Turning length in bed gap: 170 mm Spindle speeds: 12 (25–1600) rpm Tailstock taper: MT 5 Quill stroke: 180 mm Quill diameter: 75 mm Spindle mount: DIN ISO 702-2 No. 8 Spindle bore: 80 mm Spindle taper: MT 7 Longitudinal feed: 35 / 0.059 – 1.646 m/min Face feed: 35 / 0.020 – 0.573 m/min Total power requirement: 8.5 kW Machine weight: approx. 2560 kg Space requirement: approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty lathe distinguished by high flexibility, precision, and cost-effectiveness. Equipped with DPA 31 Plus digital position display and quick-change tool post. Description: - Hardened and ground Z-axis guideway - Guaranteed spindle nose runout accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined cross slide - All guideways adjustable via gib strips Lrsdpeucgr Ijfx Af Ieg - Forward/reverse operation on cross slide via shift spindle - Dual-channel safety electronics - Central lubrication in cross slide - Compound rest swivelling range ±90° - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, with two adjustable precision tapered roller bearings - Switch with life cycle calculation, tested to EN ISO 13849 - Handwheels with adjustable fine calibration 0.04 / 0.02 mm - Safety handwheels with disengagement function to EN23125 on X and Z axes - Gears and shafts hardened and ground, running in oil bath on precision bearings - Clearly arranged selection levers for feed speed adjustment - Enclosed rapid-change feed gearbox - Emergency stop punch button, motor protection switch, lockable main switch - Emergency stop foot pedal - Tailstock offset for taper turning ±10 mm - Tailstock quill and handwheel with adjustable fine calibration 0.025 mm; quick, simple, and tool-free adjustment via clamping lever - Energy chain for gentle cable and hose guidance - Heavily ribbed, induction-hardened, and precision-ground grey cast iron prism bed - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Adjustable leadscrew dial scale Scope of supply: - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MT 7/MT 5 - TH 5620V: Reducing sleeve Ø113 mm / MT 5 - Fixed centre MT 5 - Fixed and revolving centre MT 5 - Quick-change tool post 7-C - Tool holder 32 x 150 Type D for square tools - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)