Džiovyklė

Koch-Technik CKT 110

Būklė: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard Dcsdpfeh Rdwxex Aahjd - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Gamybos metai: 2011, būklė: geras (naudotas), Shredding plant, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredding plant: fully made of stainless steel, suitable for frozen meat or other materials -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting blades: 10 pieces -Dimensions of cutting blades: 250 mm -Feed hopper: 500 x 895 x H480 mm Dcodeh Di H Djpfx Aahsd -Dimensions: 880/1390/H2060 mm -Weight: 640 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, 5 kW air-cooled chiller for outdoor installation with axial fans. Standard equipment includes a p3 pump. Dcedpfx Ajfqllleahod Technical data available upon request. The machine is available from our stock in Güglingen. We are happy to provide you with free, professional advice for your application. We constantly have a changing selection of chillers in all sizes available from stock—as demonstration units, new, or partly used machines. Additionally, we also accept refrigeration units as trade-ins, or purchase these directly.

Būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 3800, All machine data can be found in the pictures. Dcsdpfxed Dlkaj Aahjd If you are interested, simply make us an offer. The machine can be inspected and is also ready for collection.

Gamybos metai: 2003, būklė: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Dedpfoiyyf Isx Aahecd Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Djdpfxjuykh Ds Aahecd Mould height: 150-300 mm Distance between mounting plates: 350-500 mm Tie bar spacing: 221 mm Mould mounting platens (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm³ Shot weight: 59 g Injection pressure: 1040 bar Operating hours: 34,748

Gamybos metai: 2005, būklė: paruoštas naudoti (naudotas), Galimi du BOY 55M, pagaminimo metai 2005. Užveržimo jėga: 550 kN, sraigto skersmuo: 38 mm, judesio tūris: 196 cm³, įpurškimo slėgis: 2000 bar, plokščių matmenys: 565 mm / 540 mm, tarpų tarp juostų: 360 mm / 335 mm. Detalės aukštis min./maks.: 250 mm / 650 mm, atidarymo eiga: 400 mm, maks. plokščių atstumas: 1050 mm, išstumtuvo eiga: 80 mm, maks. įrankio svoris: 600 kg. Matmenys X/Y/Z: apie 3300 mm / 1200 mm / 2100 mm, svoris: apie 2300 kg, darbo valandos: 29 664 h, valdymas: Procan MD. Įskaitant roboto sąsają Euromap 12. Dcodpfx Aastyaypjhed

Būklė: naudotas, Automatinė mašina polietileninių maišelių (marškinėlių ar pirkinių maišelių) gamybai Gamintojas: COSMO Modelis: ST-99 Maišelio dydis: - ilgis: 350 - 650 mm - plotis: 160 - 365 mm Dcsdpfxsrww E Ie Aahod - storis: 0,008 - 0,05 mm Našumas: 180 - 300 vnt./min Įdiegta galia: 12 kW Maitinimas: 230 V, 3 fazės, 50/60 Hz Išmatavimai: 7150 x 1600 x 1750 mm Papildomai reikalingas oro kompresorius: 10 AG – komplekte nėra Techninė būklė: naudota mašina

Gamybos metai: 1987, būklė: paruoštas naudoti (naudotas), Uždarymo jėga: 220 kN, min. įrankio aukštis: 200 mm, maks. atidarymo eiga: 200 mm, maks. plokščių atstumas: 400 mm, išstūmėjo eiga: 80 mm, staklių matmenys (I/P/A): apie 2600 mm/800 mm/1600 mm, svoris: apie 760 kg. Apžiūra vietoje galima. Dodpfx Aaow R Dg Uehjcd

Gamybos metai: 1997, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: GO 832 833, Demag ELKE overhead crane crane runway bridge crane indoor crane crane 2 units available!!! Load capacity / lifting capacity: 1.6 tons (1600 kg) Track gauge: 11,785 mm, external dimension approx. 12,000 mm Year of manufacture: 1997 with pendant control Lifting height: 3 m Overall height: from top edge of crane girder to bottom edge of hook approx. 900 mm End carriage length: approx. 200 cm The crane is dismantled and available immediately. Matching power rails can also be supplied. Please inquire. Very good condition, inspection logbook is available. Column-mounted and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Dcedpfjum I Aksx Aahjd Shipping via freight forwarder possible – please provide postal code for quotation. Collection preferred.