Horizontalios gręžimo ir kaiščių įterpimo staklės

KOCH SPRINT BASE LINE

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 13 450 mm, bendras plotis: 4 135 mm, bendras ilgis: 3 092 mm, keliamoji galia vienai sandėliavimo sekcijai: 400 kg, įėjimo įtampa: 400 V, keliamoji galia: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Ijdjru A Atjpfx Afwja Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Number of trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid while the system is still available Technical specifications for each Logimat: – Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg – Maximum tray capacity (approx.): 91 trays, 400 kg each, evenly distributed – Tray dimensions: 3625 x 815 x 100 mm – Tray dead weight: 70 kg – Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm – System footprint (approx.): 12.8 m² – Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² – Average tray retrieval time: 26 sec – Maximum tray retrieval time: 26 sec – Average tray exchange time: 51 sec – Maximum tray exchange time: 72 sec – Machine weight without trays: 5200 kg – Equipped with LogiTilt – Equipped with LogiPointer – Equipped with LogiGate – Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if required. Photos and videos of operation and dismantling available upon request by email. Price: special export price Price: excl. VAT Availability: in stock We have 3 Schäfer Logimat units in stock Machinehandel De Leeuw BV specializes in used paternoster systems, including Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Longitudinal profiling machine for parquet flooring Iodpfevxz Syex Afwea 4+4 motors Minimum working width: 80 mm M+F profile (Tongue & Groove)

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Iedpsu Atmuofx Afwsa Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Gamybos metai: 1998, Sąlyga: geras (naudotas), I am selling a dowel drilling machine with dowel insertion unit KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programmable CNC-controlled motorized Z-axis Working width: 1200 mm Iodpfx Afod Exwgswsa Maximum working height: 36 mm Available for immediate sale

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. Iedpfx Astyyn Hofwoa 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0-250-87-6869, Gręžimo galvutė su 8 velenais (V8 SW/32) Horizontali gręžimo galvutė su 4 velenais X kryptimi Horizontali gręžimo galvutė su 2 velenais Y kryptimi Pjūklas grioveliams D=100 mm (X kryptis) Stabdantis cilindras ruošinio pozicionavimui Isdpfxsvtyc Hj Afwja Ruošinio tvirtinimo sistema Ruošinio ilgis 2500 mm Ruošinio storis 12-60 mm WOODWOP mašinai WOODWOP IMPORT DXF BASIC (1 licencija)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, centro aukštis: 100 mm, šlifavimo disko skersmuo: 350 mm, ruošinio svoris tarp centrų: 20 000 g, atstumas tarp centrų: 400 mm, įvesties srovės tipas: trifazis, šlifavimo ratuko plotis: 30 mm, veleno greitis (maks.): 1 200 aps./min, veleno greitis (min.): 30 aps./min, padavimo ilgis Z ašis: 420 mm, šlifavimo veleno variklio galia: 3 000 W, bendras svoris: 1 600 kg, paskutinio kapitalinio remonto metai: 2025, įėjimo įtampa: 400 V, Cilindrinis šlifuoklis STUDER S 20 Favorit TECHNINĖS CHARAKTERISTIKOS: Pagaminimo metai: 1997 Atstumas tarp centrų: 400 mm Centrų aukštis: 100 mm Z ašies eiga: 420 mm Darbinis padavimo greitis Z ašyje: 100 – 3500 mm/min Stalo pasukimo kampas: 0 – 30° Šlifavimo veleno variklio galia: 3 kW Didžiausias šlifavimo disko skersmuo: 350 mm Didžiausias šlifavimo disko plotis: 30 mm Šlifavimo disko tvirtinimo skersmuo: 127 mm Ruoinio veleno galas: W20 Ruoinio veleno min. greitis: 30 aps./min Ruoinio veleno maks. greitis: 1200 aps./min Maks. detalės masė laikiklyje tarp centrų: 20 kg Ruoinio pasukimo diapazonas: 0° / +90° Ruoinio veleno galia: 0,5 kW Uždėjimo centras: MT2 Galvutės sustūmos eiga: 20 mm Maitinimo įtampa: 400 V Bendras reikalingas galingumas: 8 kVA Staklių matmenys: 2350 x 1480 mm Svoris: 1600 kg KOMPLEKTACIJOJE: x1 popierinės juostos filtravimo įrenginys x1 SONY LH 31A dviejų ašių skaitmeninė padėties rodymo sistema x1 WALDMANN LED lempa x1 vidinio šlifavimo velenuas tipas 82060B, greičiai: 11 900–28 400 aps./min x1 SENSITRON kontaktinis indikatorius x1 šlifavimo disko balansavimo įrenginys x1 šlifavimo disko balansavimo velenas x1 trijų žandų griebtuvas FN Ø100 mm MT3 x1 magnetinis griebtuvas Ø160 mm MT3 x1 stalas su disko apdorojimo įtaisu x37 W20 griebtuvai Ijdpewt Tgwofx Afwoa x2 pusiniai centrai x2 pilni centrai x1 bukas centras x1 skriemulys Ø105 mm vidinio šlifavimo velenui x2 išorinio šlifavimo diskų flanšai x1 TYROLIT 494271 šlifavimo diskas išoriniam šlifavimui Įvairūs vidiniai šlifavimo diskai x4 ruoinių laikikliai Įvairūs kiti priedai Staklės įjungtos demonstruojamos mūsų patalpose tik iš anksto susitarus. Kaina pagal užklausimą, krovimas į transporto priemonę įskaičiuotas. Galimas pristatymas visame pasaulyje. Šio puslapio informacija pateikta geriausiomis mūsų žiniomis, tačiau jos tikslumas negarantuojamas. Panašūs įrenginiai: Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Vidinis ir išorinis šlifavimas (ID/OD). Taip pat galite domėtis paviršiaus šlifuokliu, tekinimo staklėmis, apdirbimo centru, frezavimo staklėmis.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 005521, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Ijdsvctlgopfx Afwja Working table: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool holders: 24

Sąlyga: labai geros būklės (naudotas), Heidenhain digital display. Fehlmann cross table: KS 255. Isdpfx Afovbzlrewja Accessories: available. Working range: Quill travel Z-axis: 110 mm Travel of machine head: 450 mm Table to spindle nose: 0 – 527 mm Quick-change systems: SF 32 Working spindle: 2.9 kW Infinitely variable speed range: 50 - 6300 rpm Clamping area: 255 x 550 mm Dimensions and weight: Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Weight approx.: 850 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press is equipped with a 5m straightening beam. It is capable of processing beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with Stierli’s proven stroke fine adjustment control, making it very easy to use and enabling fast, precise straightening and bending operations. Iedpfxoufhzvj Afwea Additional options can be added upon request, such as powered roller conveyors, NC control, laser measurement, etc. (Note: The photo does not show the original machine.)