Konvencinė tekinimo staklės - Sinus 330/1500 D

Knuth Sinus 330/1500 D

Sąlyga: naudotas, Technical details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Speed range: 36...1,800 / 8 steps rpm Ncodpfx Aevadd Iebrsn Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (cross): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total connected load: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m Mikromat precision lathe - Longitudinal slide travel = 580 mm; Cross slide travel = 170 mm; Top slide travel = 130 mm - Workpiece clamping via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Tool holder: Multifix quick-change toolpost Equipment: Coolant pump 4 machine levelling feet Copying device

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts Ncedpfeu Aa I Sjx Abron - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant VC Plus Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, Excellent Condition Technical Data: >> Year of manufacture: 2014 Machine No. JD12 >> Center height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centers: 650 mm >> Spindle speeds from 30 to 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock taper: MK 3 >> Infinitely variable feed adjustment during operation via potentiometer (override) Ncsdpjydczdsfx Abrsn >> Input for feeds and thread pitches >> Longitudinal feeds from 0.1 to 6 mm/rev >> Cross feeds from 0.003 to 2 mm/rev >> Threading options: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.1 to 20 mm >> Weight approx. 1400 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L), 1.7 m (H), 0.89 m (D) Accessories and Equipment: >> Weiler digital readout >> Collet chuck system NEW, collets NEW from 3 to 26 mm >> 3-jaw chuck 160 mm with 1 set of jaws >> 4-jaw chuck 160 mm with 2 sets of jaws >> Multifix size B with 3 toolholders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram For Safety: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of respective handwheel when feed is engaged VCplus Digital Readout: >> 8-inch color display >> 3 axes: bed, cross slide, compound slide >> 99 tool memory >> Oriented spindle stop >> Input of constant speed or cutting speed >> Feeds and thread settings displayed >> Thread cutting with electronic limit stop About the Machine: This offer is for a Weiler Praktikant VC Plus precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture: 2014, in very good condition with original paint. The machine is fully functional and comes equipped with new collets and chucks. You are welcome to inspect the machine under power at our facility and verify its condition.

Sąlyga: geras (naudotas), Weiler E70 CNC-Hohlspindeldrehmaschine Baujahr: 2003 Spitzenweite: 2000 mm Spindelbohrung: 8" (200 mm) Ausstattung: Front- und Rückspannfutter Reitstock Fester Lünettenbock Nodswmqkyepfx Abrscn

Sąlyga: naudotas, Gamybos metai: 1975, Technical details: Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis (longitudinal): 0.08 - 1.10 m/min Feed range y-axis (cross): 0.028 - 0.40 m/min Tailstock quill taper: MK4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Ncsdpju Ix E Hefx Abrsn Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix tool holder - Coolant system with pump - Chuck guard - Chip tray - Chip guard Accessories: - Chuck key - Tool holder - 2 gears

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Fervi T047/400VDA pavaros reduktorinis gręžimo-frezavimo staklės, sriegiklis, 400V 1,5 kW. NAUJA GAMYBA, atitinka CE standartus. Akcijos kaina – galiojimas ribotas, kol yra sandėlyje. Įrenginys tinkamas šioms operacijoms: frezavimui, gręžimui, sriegimui. Gręžimo į ketaus maks. diametras su išankstiniu skylimu: ø 40 mm. Gręžimo į plieną maks. diametras su išankstiniu skylimu: ø 32 mm. Frezavimo su keičiamomis plokštelėmis galvute maks.: ø 80 mm. Frezavimo galimybė: ø 25 mm. Sriegimo galimybė: ø 22 mm. Kūginis tvirtinimas: CM 4. Griebtuvo eiga: 130 mm. Griebtuvo diametras: ø 76 mm. Kolonos diametras: ø 115 mm. Galvos pasvirimas: ±60°. Veleno greičiai (12): 75 ÷ 3200 aps./min. Trifazis variklis: 400 V, 50 Hz, 1,1–1,5 kW. Stalo matmenys: 585 x 190 mm. Lizdo plotis: 12 mm. Bazės matmenys: 648 x 412 mm. Bendri išmatavimai: 740 x 790 x 1960h mm. Svoris: 390 kg. Njdpfxsg Npiwe Abrscn

Sąlyga: naujas, Gamybos metai: 2025, Center height: 250 mm Spindle bore: 82 mm Distance between centers: 2000 mm Swing over bed: 500 mm Swing over gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Nsdpfed I A Auex Abrjcn Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,950.00 kg Dimensions: 3,132 x 975 x 1,270 mm

Sąlyga: naujas, Gamybos metai: 2025, Genie GS3246 E-Drive electric scissor lift, new, used – demo machines available Ncedpfx Asrqfnfebrjn

Sąlyga: naujas, Gamybos metai: 2025, Swing diameter over bed: 330 mm Ncedpfx Abjwp Tq Usron Swing diameter over cross slide: 210 mm Turning length: 1,000 mm Centre height: 167 mm Spindle bore: 40 mm Drive power: 2.2 kW - New machine - with 3-axis ACU-RITE digital readout and MULTIFIX quick-change tool post, size MA * For more information on the exact standard equipment and available options, please visit our website or contact us directly *

Sąlyga: naujas, The VHF 3.2 is a high-performance universal milling machine, categorized among conventional milling machines and belonging to the universal milling machine product group. This versatile model complements the established top model of the VHF series and offers a combination of a horizontal spindle and a swiveling vertical milling head, making it ideal for a wide range of applications. Featuring a robust frame made of high-strength cast iron and a precisely manufactured main spindle gearbox, the VHF 3.2 is perfectly suited for use in repair workshops as well as in training and production departments. The machine is equipped with a spacious table with a clamping area of 1,370 x 320 mm and, thanks to its powerful servomotor, offers infinitely variable feeds in all axes. In addition, essential features such as a coolant system and a chip tray are included as standard. If you are looking for a powerful and robust solution in the field of conventional milling machines, do not hesitate to order online or submit an inquiry. Nsdpfx Abjn E Ni Hsrocn