Vizuoti

KNUTH

Sąlyga: naudotas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal seams Gbsdpfjdzqblex Abdsg For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is a double-over edge of sheet metal, created by folding it once over itself to increase its rigidity. Folding produces a rounded edge, reducing the risk of injury from cutting on a sharp sheet metal edge. Ideal for sheet metal processing for sheet metal furniture, cladding panels, or for air duct and silencer construction.

Gamybos metai: 2007, Sąlyga: visiškai atnaujintas (naudotas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Gbsdpsmmfwusfx Abdsg Submerged wire EDM machine with automatic wire threading and re-threading in case of wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handheld control for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and completely overhauled after receiving your order. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.

Sąlyga: naudotas, Gamybos metai: 1956, mašinos/transporto priemonės numeris: 17179, Heavy-duty lathe, lathe, engine lathe, geared head lathe, geared head engine lathe Gbsdpfeh Uuzysx Abdog - Manufacturer: Meuser, geared head engine lathe type M3A - Turning length: 1,400 mm - Swing over bed: 550 mm - Swing without bed: 800 mm - Swing over cross slide: 300 mm - Spindle bore: Ø 58 mm - Spindle speeds: 15 - 810 rpm - 3-jaw chuck: Röhm Ø 250 mm - Faceplate: 500 mm - Accessories: incl. toolholder/tools, see photos - Tailstock taper: MK5 - Dimensions: 2770/1070/H1310 mm

Sąlyga: naujas, Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Drilling stroke: 160 mm Spindle taper: MT 4 Godpfx Ajfv H H Hjbdjbg Table size: 500 x 420 mm Column diameter: 120 mm Speed range: 85 - 1800 rpm Feed rates: 0.1 - 0.2 - 0.3 mm/rev Total power requirement: 0.85 / 1.5 kW Machine weight approx. 500 kg Dimensions (L x W x H): 965 x 515 x 1920 mm High-quality column drilling machine for industrial applications. Suitable for multi-shift operation. - Tapping unit up to max. M20 - Precisely adjustable drilling depth stop - Height-adjustable work table via rack and hand crank - Base plate with T-slots - High concentricity accuracy less than 0.02 mm - Robust, high-performance drive motor - Digital speed display - Automatic feed

Sąlyga: naujas, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Weight approx.: 1.2 t Dimensions (LxWxH): Length 2400 mm, Width/Depth 2160 mm, Height 2300 mm, Weight 1200 kg Spindle speed: 60 – 4200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High concentricity accuracy due to tapered roller bearings, measured at less than 0.01 mm in the quill - Infinitely variable speed control - Clockwise/anti-clockwise rotation for thread cutting - X and Z axes with adjustable 55° dovetail guides - Y axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Clockwise and anti-clockwise rotation - Automatic quill feed, 3 steps, 0.04–0.15 mm/rev - Motorized feed on X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant channel - Central lubrication - Height-adjustable safety shield with microswitch, protects against flying chips and parts for maximum operator safety - Robust and large dimensioned cross table, precision machined with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel range: X / Y / Z axes 740 mm / 330 mm / 320 mm Dimensions and weights Gedsd H Hhzopfx Abdsbg Length 2400 mm Width/Depth 2160 mm Height 2300 mm Weight 1200 kg Drilling and milling performance Max. face mill diameter: 76 mm Max. shank milling cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Network frequency: 50 Hz Horizontal milling table Length: 254 mm Width: 1370 mm Max. vertical spindle to milling table distance: 405 mm T-slot size: 16 mm T-slot number: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0 – 420 mm Coolant system Coolant pump(s) drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC category: C2 Travel X axis manual: 820 mm Y axis manual: 410 mm Z axis manual: 400 mm X axis automatic: 740 mm Y axis automatic: 330 mm Z axis automatic: 320 mm Vertical spindle Overhang: 0 – 420 mm Spindle taper: ISO 40 DIN 2080 Speed range: 60 – 4200 rpm Number of speed ranges: 2 Speed control: mechanical, stepless Milling head swivel range X-Y plane: 90° Milling head swivel range Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head vertical travel Z axis: 470 mm Package unit: 1

Sąlyga: naudotas, Gamybos metai: 1976, Technical Details: Swing diameter over bed: 340 mm Swing diameter over slide: 190 mm Turning length: 800 mm Turning length: facing = 140 mm / cross = 120 mm Centre height over bed: 170 mm Spindle bore: Ø 40 mm Speed range: 25 - 2000 rpm / 20 steps Gjdpfxova Erte Abdobg Feeds: longitudinal: 0.028 - 1.0 mm / cross: 0.012 - 0.44 mm Tailstock quill taper: MT3 Tailstock quill travel: 120 mm Total power requirement: 3.0 kW Machine weight approx.: 1.1 t Machine dimensions approx. LxWxH: 2.0 x 0.8 x 1.4 m Thread cutting capability: Metric, Whitworth, and module threads Equipment: - 2-way measuring system VISUCONT - 3-jaw chuck Ø 205 mm with internal clamping jaws - Multifix quick-change toolpost - Foot brake - Coolant pump (supply line not included)

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1-1, Jaw width: 125 mm Machine weight approx.: 30 t Clamping width: 205 mm Gbedpfx Abocxxl Ajdeg

Sąlyga: naujas, MAXION BT 20 Bench Drill Powerful MK2 machine featuring an easy-scroll control wheel and large display. Digital drilling depth, piece counter, fine adjustment for drilling depth, and LED light all come as standard equipment. Thus, the new BT20 combines innovative features with proven drive technology. Technical Data: Normal drilling capacity: 20 mm Thread cutting capacity: M 16 Spindle: MK 2 Drilling depth: 100 mm Throat: 215 mm Distance spindle/base plate: 185 – 541 mm Table size: 340 x 445 mm T-slot width: 12 mm Gjdpfxef Nrbfs Abdjbg Column diameter: 90 mm Overall height: 990 mm Weight: 120 kg Motor, pole-changing: 0.6/1.2 kW Power supply: 400 V/50 Hz Two spindle speed ranges available: MAXION BT 20 (M00027) Infinitely variable spindle speeds: 100 – 1,800 rpm MAXION BT 20 (M00028) Infinitely variable spindle speeds: 240 – 3,600 rpm Optional Accessories Drilling kit Thread cutting device with digital depth display Column 200 mm longer Cross table MF3 Base cabinet Electric cooling system Note: ALSO AVAILABLE AS COLUMN DRILLING MACHINE

Sąlyga: nepatikrintas (naudotas),

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 053051, Grinding area: 200 x 25 mm Electrical connection: 380 V, 0.5 kW Gsdpfx Abebfp Ixedsbg Space requirement: 550 x 450 x 1100 mm Weight: 95 kg