Dalių valiklis

Kleinteilereiniger P100 Spritzreinigung P100

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Hodpfxouxft Ee Af Deff Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 1992, veleno greitis (min.): 7 500 aps./min, veleno greitis (maks.): 24 000 aps./min, 4 motor-driven grinding spindles (liquid-cooled, with sealing air / oil mist lubrication) including REFU HF frequency converter, e.g., for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 Hfsdpfx Afol Tn Afe Dof 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for the power supply of motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as-is – year of manufacture approx. 1992. A collection of various grinding spindle shafts / arbors for grinding wheels are available for these grinding spindles and can be purchased separately. Price / details on request. All technical details are subject to errors or omissions. We sell exclusively to countries within the European Community.

Būklė: naujas, Gamybos metai: 2024, pjovimo aukštis (maks.): 150 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 108 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 108 mm, BERG+SCHMID Double Mitre Bandsaw GBS 218 Eco AutoCut Cutting speed: 25-80 m/min • Mitre angle left: 60° • For cutting steel, stainless steel, and aluminium profiles • Quick-release vice with fast clamping device • Integrated blade tension control • Carbide blade guides • Electric coolant system • Machine base supplied disassembled The AutoCut system consists of: • Hydraulic cylinder, feed control, spring assembly, limit switch, and enables three operating modes: 1. Automatic saw frame lowering via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at end of cut 2. Rapid lowering of the saw frame from rest position to the workpiece, then switching to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Hfsdpfst I R Edjx Af Dof Saw blade dimensions: 2455x27x0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc., available on request! Delivery time: from stock Waiblingen Beinstein

Būklė: naujas, Gamybos metai: 2026, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Item No. 6020 With the fully automatic UniBohrFix 100 drilling machine, your material is positioned along the X-axis at the desired spot, clamped, and drilled. All you need to do is press the start button. The horizontal gripper of the positioning system allows easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After simply entering the X-values or recalling a previously saved program, the machine operates completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages: • A series of holes can be drilled automatically at precise intervals. • Possible operator errors are drastically reduced. • Programming takes only a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower required. Hfedpfx Afsfu Itbj Djf Fully automatic design Measuring length: 6,000 mm Total length: 13,500 mm NC single-axis control Pneumatic vice (clamping width 200 mm) Minimal-quantity spray unit with holder and spray nozzle Drilling machine: Unimax 3T AV (see technical data sheet for specifications) Rotation lock Motorised height adjustment Tapping unit NC positioning system PD 200p Feed force 200 kg Positioning by absolute or incremental dimensions possible Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack Steel carrier profile as dirt protection Infeed and outfeed roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting brackets / Roller width 407 mm / Support plates / Bracing / Roller diameter 50 mm / Steel rollers We look forward to your enquiry! Plantec Maschinen GmbH

Būklė: geras (naudotas), Gamybos metai: 2014, Spindle speeds: 170 – 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> Control system retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data – Grinding diameter: 20 – 300 mm --> Swing diameter: 350 (500) mm --> Workpiece length: 300 (1,300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min --> Grinding stroke speed: 0 – 9.99 m/min --> Infeed speed: 0 – 99.99 m/min --> Step infeed value during reversal: 0 – 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / revolution --> Grinding stroke speed: 0 – 5 m/min / revolution --> Infeed speed: 0 – 99.99 m/min / revolution --> Step infeed value during reversal: 0 – 0.999 mm / Ø --> Swiveling capability of the workpiece spindle head: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm Hfodpfjw Intajx Af Dsf --> Resolution: 0.001 mm / Ø --> Traverse speed: 5 m/min --> Center height above workpiece table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Original year of manufacture: 1988

Būklė: geras (naudotas), Centre drilling 2-50 mm Workpiece diameter 8-125 mm Workpiece length 50-1000 mm Grinding wheel speed 13,000-45,000 rpm Various accessories Hsdsrivluopfx Af Dsff MARCELS MASCHINEN AG

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), Description to follow! Hedpox A H Rxsfx Af Deff

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Hfodpfx Aouxfupof Djf Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Būklė: naujas, Column drill, precise, quiet, and reliable. Manufactured in accordance with strict safety standards. Precision spindle axis with hardened Morse taper, ground base plate. Equipped with electronic speed variator. Swivel work table + vice, 350 x 250 mm. Drilling capacity in steel: R50 mm ø 22. Tapping capacity in steel: R50 mm M 14. Spindle taper: MT2 Spindle travel: 90 mm. Spindle sleeve diameter: 52 mm. Column diameter: 98 mm. Distance column to spindle center: 201 mm. PU belt drive Electronic variator (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V Single-phase. Overall dimensions (H x W x D): 1950 x 600 x 680 mm. Hfodpfeir Aihox Af Djf Weight: 220 kg.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, The STUDER S242 is a versatile hard-finishing machining center for grinding, turning, and milling of medium-sized workpieces. It is ideal for complete machining in a single setup – from external and internal grinding to hard turning and drilling/milling with driven tools. The Studer S242 allows for highly precise finishing of workpieces in rotational applications. Equipped with automation, this machine is suitable for both single-part and series production. Additionally, the S242 features a VDI turret with powered tools. Centre distance: 800 mm Swing diameter: 180 mm Hfodpfxjw Hqm Io Af Dsf Max. workpiece weight: 60 kg X-axis: travel 220 mm, resolution 0.00001 mm Z-axis: travel 1,600 mm, resolution 0.00001 mm Grinding spindle: 6.8 kW, grinding wheel Ø 400 x 50 mm, automatic balancing Workpiece spindle: AC synchronous spindle motor 10.5 kW, up to 7,500 rpm Tailstock options: quill tailstock with integrated travel measuring system Machine bed: mineral cast Granitan® S103 for excellent damping and thermal stability Software & control: Fanuc 31i-A control with 15" touchscreen German dialogue language for StuderWIN Integrated measuring control with Renishaw LP2 touch probe, switchable to turret Special features & benefits: Complete machining in one setup → reduces primary and secondary process times High dimensional accuracy and surface quality thanks to Granitan® machine bed Short changeover times, suitable for single-part to large-scale production Flexible clamping system and modular tool configuration High process reliability through integrated measuring and sensor technology Dimensions & weight: Total weight: 12,000 kg Connected load: 45 kVA Compressed air requirement: min. 5.5 bar