Chipper

Klöckner 160/400

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Njdpod Ab H Hjfx Adtodd Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Professional Drum Dryer: SB-3000 OPTIMECH for sawdust, wood chips, peat, flax, hemp, grain, biomass, manure, corn, rapeseed, tobacco leaves, mint, herbs, copper granules, aluminum, sand, fruit, vegetables, pits, seeds, mushrooms, bread, etc. Complete unit, ready for operation. Our dryers have been operating reliably at our customers’ sites for over 15 years. The machine is adapted for nearly any type of input material. The material is absolutely never in contact with exhaust gases or open flames. Ndedpfx Aev D D Axjdted Drying occurs via a heat exchanger, exclusively using hot air. No risk of spontaneous combustion or scorching of material (drying temperature is adjustable). The dryer is best suited for indoor installation, at ambient temperatures of at least +10°C. Performance: removal of approx. 10–15% moisture/hour - drum rotation power supply: 1.1 kW (minimal power consumption thanks to a large gear wheel); - hot air heater power supply: heating oil/diesel fuel; - heating oil consumption: approx. 5 L/hour; - total electric power consumption: approx. 3 kW; - efficient Italian fans (2x 2,500 m³/h); - exhaust gas discharge at a single designated point; - mechanical steam extraction with cyclone; - rotary heat recovery (manufactured entirely of stainless, acid-resistant steel); - safe and easy operation; - drum rotation: left/right; - control cabinet and all electrical connections assembled by a qualified electrician; - all spare parts available immediately—manufacturer support; - possible modifications according to individual customer requirements; - we have a full machinery park and a spacious production hall at one location for over 40 years, we are trustworthy and always available by phone for assistance. Single batch capacity: up to 1.5 m³. Thermal output: 40–100 kW. Drying temperature adjustment (controller with temperature sensor). Reliable burner from renowned brand: LAMBORGHINI. Possibility to purchase the machine without the horizontal conveyor shown in the pictures and video.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), VK 450 Der Entrinder wurde komplett überholt. Nedpfx Aoq Hr N Iedtedd

Sąlyga: geras (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Corali padeklu kalimo linija Nedpfx Ajvx Hntodtjdd

Sąlyga: naudotas, Gamybos metai: 2001, slėgis (maks.): 10 juosta, Screw Compressor Manufacturer: Atlas Copco Model: GA 11 FF Year of manufacture: 2001 Technical Data Manufacturer: Atlas Copco Model: GA 11 FF (with integrated refrigeration dryer) Year of manufacture: 2001 Design: Floor-mounted Control system: Elektronikon Max. operating pressure: 10 bar Motor speed: 3000 rpm Rated power: 11.0 kW Ndjdpfx Aowivlujdtjd Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 475 kg All information is provided without guarantee. A live demonstration under power is possible at any time in our showroom.

Sąlyga: naudotas, Žievės nuėmiklis Bezner 40-140. Veikiantis. Vaizdo įrašas pagal užklausą. Ndsdpjwkkbtsfx Adtjd

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1991, Residual Wood Disposal incl. Chipping Station Drum Chipper / Wood Chipper / Wood Shredder overhauled (workshop-refurbished) Manufacturer: HAAS Year of Manufacture: 1991 comprising: HAAS Drum Chipper Type HTH-160x510 L2WV factory overhauled (general overhaul) with new bearings (spherical roller bearings) and tested rotor New knives and counter-knives Infeed width/height: 510 x 160 mm Rotor diameter: 500 mm Screen perforation: 60 x 60 mm Drive power: 45.0 kW Infeed motors: 2 x 2.2 kW Weight: approx. 3,000 kg Machine color: RAL 6011 Reseda Green without electrical installation incl. control cabinet with all system-relevant built-in components according to CE standards. Operation on the cabinet door, without cables 1 Piece Vibratory Conveyor Type HVSR 500x8000 factory overhauled (general overhaul) with new bearings (spherical roller bearings) and tested vibration elements Tray width: approx. 500 mm Tray length: approx. 8,000 mm Tray height: approx. 170 mm Wall thickness: approx. 5 mm Feed height (input): approx. 450 mm Total height (input): approx. 770 mm Discharge height (output): approx. 950 mm Total height (output): approx. 1,120 mm Drive power: approx. 4.0 kW Weight: approx. 1,400 kg Machine color: RAL 6011 Reseda Green Inclined vibratory conveyor (approx. 4.5°) incl. screening zone 15 x 15 mm, L = 500 mm incl. metal-free zone made of wood, new (L = 1,500 mm) incl. used metal detector without electrical installation 1 Piece HAAS Scraper Chain Conveyor Type HKF-490x11,000 factory overhauled with new bearings, tested conveyor chain, and pusher elements Width: approx. 500 mm (600 mm) Length: approx. 11,000 mm Trough height: approx. 570 mm with curve at bottom: 45° Total height: approx. 6,700 mm Drive power: approx. 5.5 kW without electrical installation All machines are also available separately (subject to prior sale). Additional units (chain conveyors) are available as new machines (manufacturer: S&F GmbH). Ndedpfx Asw H Eqzedtod