Hidrauliniai vienos kolonos presai

KK Kletzer PCR 150

Gamybos metai: 1965, būklė: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available Duodpfx Aecubatjd Iep

Būklė: naudotas, Gamybos metai: 2007, Pressure: 200 t Throat depth: 510 mm Stroke: 16 - 160 mm Ram adjustment: 120 mm Table surface: 1500 x 1000 mm Djdsvbk Rwspfx Ad Ieup Table height above floor: 900 mm Pass-through opening in table: 800 x 250 mm Ram surface: 1000 x 700 mm Pin hole in ram: 65 x 110 mm T-slot width: 28 mm Adjustable stroke rate: 30 - 120 strokes/min Hydraulic unit oil capacity: 5 l Installation height (max. stroke, ram adj. top): 600 mm Installation height (stroke bottom, ram adj. top): 440 mm Total power requirement: 32.2 kW Machine weight approx.: 24 t Required space (WxDxH): 2.85 x 3.1 x 3.65 m - Hydraulic clutch - Fixed table - Hydraulic overload protection in the ram - Hydraulic connecting rod clamping - Motorized ram height adjustment, 120 mm, with digital display of set ram height, rapid and creep speed - Fully automatic stroke adjustment, adjustable range 16 - 160 mm - Ram weight compensation - Electronic top dead center correction - Planetary gearbox - Central oil circulation lubrication - Separate control desk with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return stroke) - Additional operating mode "setup/creep speed" - Electric stroke counter - Electric preset counter - Electric travel limitation of the connecting rod pin - Electronic cam controller - Infinitely adjustable drive (frequency-controlled) - 2 power sockets - Clamping plate - Temperature monitoring of main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of vibration-damping elements Additional equipment: Electronic roller feeder ebu EVX 500 Feed width: 10 - 500 mm Material cross-section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Intermittent ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Būklė: naudotas, Workshop-refurbished Surface Grinding Machine GEIBEL & HOTZ Type FS 60 AC Machine no. 2012190398 Year of manufacture: 1998 - 2025 Workshop-refurbished at Stange Werkzeugmaschinen in 2025 Electro-magnetic chuck 600 x 400 mm Table clamping area 960/620 x 400 mm Table longitudinal travel max. 660 mm Grinding width 400 mm Cross travel with automatic feed max. 400 mm Cross travel by manual adjustment max. 425 mm Distance spindle center - magnetic chuck max. 425 mm Table speed 2 - 28 m/min, stepless Grinding wheel dimensions Ø 300 x 50 x 76 mm Manual vertical feed 1 graduation = 0.002 mm Manual cross feed 1 graduation = 0.01 mm Power supply 400 Volt, 50 Hz - Electro-magnetic chuck GEIBEL & HOTZ, Type HPM 600 x 400, height 99 mm - Automatic depth infeed for surface and plunge grinding with actual value digital display - Depth infeed setting via decade switch - Cross feed for surface grinding motorized or manual via handwheel - Hydraulic table longitudinal movement - Central lubrication for table longitudinal movement, Y+Z axis movements, and lead screws - Mounted grinding wheel with Ø 300 mm (currently only Ø 290 mm) - Free-standing electrical control cabinet - Hydraulic unit mounted in machine base Duodpfsw Hhbcsx Ad Isp - Coolant system with paper band filter - Machine mounted for transport on transport pallet Space requirement L x W x H: 2850 x 2250 x 2500 mm Space requirement L x W x H: 3000 x 2400 x 2500 mm Weight approx. 2 tons (complete) Very good condition - workshop-refurbished at Stange Werkzeugmaschinen

Būklė: naudotas, Gamybos metai: 1995, Spaudimas: 250 t Išsikišimas: 450 mm Eiga: 8 - 135 mm Eigos dažnis: 50 /min Atstumas tarp stalo ir stūmoklio, maksimalioje eigoje viršuje, reguliuojamas viršuje: 635 mm Stalo matmenys: 1250 x 850 mm Anga stalo centre: 355 mm Stalo aukštis nuo grindų: 950 mm Praėjimas tarp rėmo sienų: 660 mm Dujdpfxovuk Hxo Ad Isp Stūmoklio paviršius: 790 x 610 mm Stūmoklio reguliavimas: 130 mm Variklio galia: 18,5 kW Svoris: 14,0 t Užimamas plotas (PxGxA): 1,5 x 2,8 x 3,65 m Su varikliu, pneumatine sankabos/stabdymo kombinacija (Ortlinghaus), mechanine apsauga nuo perkrovos stūmoklyje, rankiniu eigos reguliavimu, rankiniu stūmoklio reguliavimu, pneumatiniu stūmoklio svorio balansu, fiksuotu stalu, motorizuota centrine tepimo sistema, dviejų rankų valdymu

Gamybos metai: 1987, būklė: naudotas, Pressure: 150 t Throat depth: 350 mm Stroke: 20–120 mm Strokes per minute: 50 / 75 spm Ram adjustment: 85 mm Table size: 1150 x 670 mm Ram surface: 800 x 380 mm Passage opening in table: 330 x 200 mm Table height: 800 mm Pin hole in ram: Ø 50 mm Machine weight approx.: 8 t Space requirements (WxDxH): approx. 2000 x 2000 x 2700 mm Hydraulic clutch-brake combination Central oil lubrication Mechanical overload protection in ram Semi-automatic stroke adjustment Manual ram adjustment Two-hand operation Duedpfop Apxhsx Ad Iep Foot control Counter bearing

Gamybos metai: 1970, būklė: naudotas, Pressure 100 t Throat depth 415 mm Stroke 8–140 mm Strokes per minute 48 Ram adjustment 80 mm Table size 920x670 mm Ram area 700x450 mm Djdpfx Adslp U Spo Ieup Table height 800 mm Ram bore diameter Ø 50 mm Machine weight approx. 8 t Space requirement approx. WxDxH 1500x2000x2800 mm Mechanical overload protection Counterbalance cylinder Manual stroke adjustment Manual ram adjustment

Būklė: labai geros būklės (naudotas), Slėgis 125 t Iškyša 400 mm Eiga 6 - 125 mm Presavimo stūmoklio reguliavimas 100 mm Montavimo aukštis (eiga apačioje, stūmoklio reguliavimas viršuje) 400 mm Stalo plotas 1100 x 750 mm Eigos skaičius 60 eigų/min Bendras galios poreikis 16 kW Staklių svoris apie 10 t Užimamas plotas apie IxPxA 1,1 x 1,9 x 3,53 m - Staklės dalinai atnaujintos - Visiškai išardytos ir technologiškai peržiūrėtos - Nauji sandarikliai - Nauja pneumatinė sankaba - Nauji sandarikliai kompensaciniame cilindre - Naujas pavaros variklis Dodpfx Adjt Eix Ro Ioup - Nauja rutulinė sraigtinė pavara - Naujas dažymas - Dabartinis UVV patikrinimas ir stabdymo laiko matavimas Staklės saugios rankiniams įdėklams Už papildomą kainą įrangą galime papildomai aprūpinti: - Darbo zonos apsauga su šviesos užtvara / cikliniu režimu, tik kartu su nauja (atskirai stovinčia) ABB saugumo valdymo ir lietimui jautrių ekranų valdymo spintele - Dviejų rankų valdymas ant atskiro stovo

Būklė: naudotas, Gamybos metai: 1972, mašinos/transporto priemonės numeris: 1171, Total pressing force: 160 t Throat depth: 350 mm Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Shut height (stroke bottom, adjustment top): 740 mm Table clamping surface approx.: 1000 x 680 mm Ram clamping surface approx.: 600 x 300 mm Strokes per minute: 50 min-1 Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment Machine includes: fencing HS Decoiler M 15 / 500 – Year of manufacture: 2009 Material width 15 - 500 mm Coil weight 1.5 t Coil outside diameter 1400 mm Coil inside diameter 380 - 530 mm HS Straightening Machine RME 40 - 9 – Year of manufacture: 2009 Material thickness 0.4 - 2 mm Number of feed rollers: 2 pcs Number of straightening rollers: 9 pcs Straightening roller diameter: 61.9 mm Duedpsuqdwxsfx Ad Ijp Feed roller diameter: 61.9 mm Feeding speed: 40 m / min Feed length: 0 - 9999.99 mm Additional equipment In 2009, the machine was retrofitted to SIEMENS S7.

Būklė: naudotas, Gamybos metai: 1980, Techninės detalės: Duedpeu N A U Iofx Ad Iep Slėgis: 160 t Eigos ilgis: 20-160 mm Įtraukos gylis: 400 mm Stūmoklio reguliavimas: 120 mm Smūgių skaičius: 71 smūgis/min Įrengimo aukštis: stalas/stūmoklis viršuje: 720 (esant 160 mm eigai) mm Įrengimo aukštis: stalas/stūmoklis apačioje: 560 (esant 160 mm eigai) mm Stūmoklio paviršius: 900 x 660 mm Praėjimas tarp stulpų: 500 x 450 mm Stalo matmenys: Ilgis x Plotis x Skersmuo: 1200 x 750 x 100 mm Bendras galios poreikis: apie 23,0 kW Mašinos svoris apytiksliai: apie 15,0 t Mašinos matmenys apytiksliai (Ilgis x Plotis x Aukštis): 2,7 x 1,5 x 3,45 m Valdymo spintos matmenys (Ilgis x Plotis x Aukštis): 2,0 x 0,65 x 2,15 m Valdymas per valdymo pultą/pjedestalą/pedalą ir rankinį valdymo įrenginį. Presas siūlomas pagal dvi parinktis. 1 parinktis: Parduodama esamos būklės, neprijungta, neišsami, neveikianti. 2 parinktis: Presas bus pilnai atnaujintas – visi komponentai bus pakeisti, atnaujinti ir patikrinti. Presas bus paruoštas naujam naudojimui. Prašome užklausose dėl šio preso nurodyti pageidaujamą pasiūlymo variantą!

Būklė: visiškai atnaujintas (naudotas), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - A complete retrofit kit to allow unrestricted manual loading and unloading in accordance with EC conformity, as well as implementation of equipment to CE standards • New control cabinet with certified dual-channel electronic Siemens safety PLC (1512SP F or 1515F) for cycle control, with integrated operator panel for operating modes: setup two-hand, single stroke two-hand, and foot operation (only in combination with BWS); manual lever operation is no longer possible, • Hydraulic safety block for monitoring the closing motion on the main cylinder, • Position-monitored directional valve for up and down movement of the ram in the main cylinder, • Two-hand control unit with dual-channel monitoring of the two-hand synchronisation on the press table (incl. 5m cable), • Replacement of main and control pump motors, Djdpfx Aew S Uazed Isup • Replacement of seals on the main cylinder, • Fine filter with contamination indicator, • The press is equipped with an electronic position measurement system (including teach-in function and display of current ram position), eliminating the need for a mechanical cam controller. Main operator panel integrated into control cabinet (mounted on right side of machine): - 12" touch panel - Operating buttons and switches for modes and drives - USB interface for data exchange - Light curtain Option: Draw cushion