Šviesolaidinis lazeris

KK Kletzer Laser Fiber FLC 2040 12 KW

Sąlyga: naujas, Sheet thickness 2.5 mm Cedpsfv H Ehjfx Admohf Roll diameter 98 mm Throat depth 160 mm Total power requirement 1.5 kW Machine weight approx. 0.35 t Space requirement approx. 550x1400x1500 mm Supplied with: • Manual version • 4 sets of rolls • Foot control • Braking motor • Emergency stop

Sąlyga: naujas, Gamybos metai: 2025, The company Airtech Stickstoff has represented Bodor Laser in Germany for several years. Our experienced team of service technicians handles the installation of the machines and provides training in German. Are you interested in our laser cutting machines? We look forward to receiving your inquiry. Csdpfxehk E Dve Admohf

Sąlyga: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. Csdpfx Adsd Ev Upjmehf NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Sąlyga: naujas, Gamybos metai: 2025, -TFON Kantenglätt- und Oberflächenreinigungssystem -Materialkompatibilität: Geeignet für Baustahl, Aluminium und Edelstahl. -Arbeitsdickenbereich: Verarbeitet Materialstärken von 0 bis 120 mm. -Kantenglättung: Erzeugt eine Radius 2-Kantenglättung für glatte, sichere Kanten, die das Erscheinungsbild und die Funktionalität des Werkstücks verbessern. -Präzisionssteuerung: Ausgestattet mit einem Siemens-Automatisierungssystem für präzise und gleichbleibende Steuerung während des gesamten Prozesses. Unabhängige Stationen: Mehrere Bearbeitungsstationen ermöglichen vielseitige Anwendungen, sodass verschiedene Arbeitsschritte gleichzeitig oder nacheinander durchgeführt werden können. Tischoptionen: Arbeitsflächengrößen von 650 mm, 1000 mm oder 1300 mm verfügbar, um spezifischen Produktionsanforderungen gerecht zu werden. Tischtypen: Flexible Ausführungen wie Magnet-, Vakuum- oder Magnet-Vakuumtische sorgen für sicheren Halt unterschiedlicher Materialien und Teilegrößen. Plasma- und Sauerstofftechnologie: Cedehq A T Uspfx Admshf Setzt moderne Plasma- und Sauerstofftechnik ein, um starke Grate und Schlacke nach dem Schneiden effektiv zu entfernen und sauberere, glattere Oberflächen zu erzielen. Oberflächenreinigung: Entfernt effizient Verunreinigungen wie Rost, Oxide und Zunder von der Oberfläche und bereitet die Teile für weitere Bearbeitungsschritte vor. Kantenglättung für Beschichtung: Bereitet Teile optimal für Lackierung und Beschichtung vor, indem eine gleichmäßige, fehlerfreie Oberfläche erzielt wird. Einsatzbereiche: Ideal für Stahl-Servicezentren, Energie-, Bergbau-, Bau- und Automobilbranche, bietet maßgeschneiderte Lösungen für Schwerlastanwendungen. Gleichmäßige Ergebnisse: Sechs Lamellenwalzen sorgen synchronisiert für konsistente, gleichmäßige Kantenradien an jedem Teil. Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schmirgelbänder durch geringeren Verschleiß und stellt eine gleichbleibende Leistung über die Zeit sicher.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 600 mm, įėjimo įtampa: 400 V, bendras svoris: 3 560 kg, ruošinio aukštis (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm wide. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet. With the SER600 Super Edge Rounder from Q-Fin, it is possible to deburr, grind, edge-break, round, descale, remove oxidation layer, or apply a linear finish to sheet metal parts up to 600 mm in width. A combination of these operations is also possible. The throughput rate of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model is equipped with a magnetic support and is therefore suitable for processing steel cut parts and other magnetic materials. The machine features 5 processing stations. Operation is conveniently controlled via an HMI touchscreen on the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this station removes burrs and/or discoloration from the product surface. If there are no burrs present, the grinding belt can be omitted or removed. It is also possible to use a finer grinding belt or finish with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations are fitted with 2 round brushes rotating in opposite directions. These brushes are used to remove sharp edges from the product by breaking edges or, through the unique combination of two brush systems, by creating a radius of up to R=3 mm. By installing special brushes, the SER600 with magnetic system is also ideally suited for removing the oxide layer from steel products or slag from plasma-cut products. We offer the machine in combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless steel extraction system operates wet, extracting grinding dust from stainless steel, steel, and aluminium, thus eliminating fire and explosion hazards. According to Q-Fin, it is the safest, simplest, and most sustainable method of extracting grinding dust. With the WES6000, there is no longer any grinding dust in the air and/or the working environment. We currently have 2 units of the SER600 in stock: - 1x new (Year of manufacture: 2025) - 1x only a few months old, like new (Year of manufacture: 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the construction and all non-wear parts. Chsdel Dw D Eopfx Admof We can also offer on-site installation of the SER600 + WES6000, including operator training. - Electrical connection of the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2009, naudota Timesavers modelis 22-serija-900-WB su šlapio nusiurbimo sistema Techniniai duomenys: Pagaminimo metai: 2009 Mašina yra pilnai renovuota - naujas transportinis kilimas - nauja rotacinė šepetė Darbinis plotis: 900 mm Šlifavimo juostos matmenys (P x I): 1900 x 930 mm Mašinos konstrukcija pagal CE Pagrindinis jungiklis, avariniai stabdžiai Diskinis stabdys Elektra: Galia: 28,05 kW Elektros prijungimas: 3 fazės Įtampa: 400 V Srovė: 55 A Dažnis: 50 Hz 1 agregatas: Kontaktinis volas, Ø150 mm Kontaktinis volas 45° Shore Preciziškas reguliavimas Matavimo laikrodis ant kontaktinio volo Chjdsxc H Rfspfx Admef Rotacinis lyginimas su padavimu Pagrindinis variklis: 7,5 / 15 kW Osciliacija 2 agregatas: Šepetinis agregatas Šepetys Ø200 mm „Clean-Strip“ 17CS02 poliravimo nr. 6 2 sukimosi kryptys Matavimo laikrodis Preciziškas reguliavimas Osciliacija Variklis: 11 kW

Sąlyga: geras (naudotas), Gamybos metai: 2012, 1 naudota apipjaustymo ir briaunų apvalinimo staklė Gamintojas: Loewer Csdpfx Asw Imucodmehf Tipas: Cross Master DD 300 Pagaminimo metai: 2012 Darbinis plotis: 300 mm Diskiniai varikliai: 2×1,5 kW, 750 aps/min Disko skersmuo: 400 mm Dirbinio storis: 0,3 iki 100 mm Bežingsnis padavimo greitis: 1 iki 6 m/min Bežingsnio greičio reguliavimas (pasirenkama): 300-1100 aps./min Ištraukimo jungtis: 150 mm Staklių matmenys (I×P×A): 1.600 x 1.800 x 1.700 mm

Sąlyga: naudotas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. With its fixed working height, the machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide-belt with abrasive belt length: 3250 mm Standard with vacuum holding system, optional with magnetic holding system. By using 3250 mm long abrasive belts, you achieve a uniformly smooth surface and reduce consumable costs due to the belts’ longer service life. Thanks to the modular machine design, it is possible to offer the optimal configuration for the customer’s specific processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and surface finishing. Please contact us for more information and images via mail(at) or Chjdpfx Aenah Taodmef

Sąlyga: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle taper internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on table Change gears Chsdpfxju Uu S Tj Admsf

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, bendras svoris: 22 800 kg, spaudimo jėga: 250 t, CNC Press Brake Manufacturer: Weinbrenner Model: GP250 Machine Specifications: - Crowning system - Die shifting - Backgauge type 2 - Front bending aid (disassembled for transport) - DNC 900PS control unit Cjdpfx Aer Sxq Rsdmohf All machine documentation is available.