Kersting konvejeris

KERSTING FB Abschieber

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% Dkedpfjvz Hq Hox Ag Ijt - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Būklė: labai geros būklės (naudotas), Virimo katilas su maišymo funkcija. Įrenginys po kapitalinio remonto. Galia 32,2 kW, 3x400V. Dkedpfxsyt R T To Ag Iot

Būklė: geras (naudotas), Straightening machine, wire straightening machine, decoiler and straightening machine combination, payoff reel, wire decoiler, double reel, reel, payoff reel, motorized reel for wire processing, press, eccentric press, hydraulic press, automatic punching machine, motorized reel, winding roll, decoiler, wire decoiler - Wire Straightening Machine: Decoiler-Straightening Machine Combination - Type: not specified - Note: without documentation - Motor: Fukota 1.5 kW Dkedpfx Agsin Rn Aj Ijt - Straightening rollers: for Ø 20 mm (see photos) - Take-up rolls: Ø 152/215 x 1330 mm - Overall dimensions: 3040/2450/H2525 mm - Weight: 2080 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, Autoklavai Techninės specifikacijos * Kiekis: 2 autoklavai su automatine pakrovimo sistema * Ilgis: 12 000 mm * Skersmuo: 3 200 mm * Tūris: 102 231 l * Didžiausias darbinis slėgis: 4,0 bar Dkjdpfxsyt Nqqo Ag Ist * Didžiausia darbinė temperatūra: 120 °C * Bandymo slėgis: 7,4 bar Katilas Techninės specifikacijos * Katilo gamintojas: Norbidel * Metai: 2018 * Modelis: NB B1200 * Kuras: gamtinės dujos * Skystis: vanduo + garai * Garų gamyba: 1 200 kg/val * Didžiausias leistinas slėgis: 10 bar(g) * Bandymo slėgis: 16,2 bar(g) * Didžiausia temperatūra: 183,2 °C * Mažiausia temperatūra: 20 °C * Šildymo paviršius: 30 m² * Tūris: 3 365 litrai * Šiluminė galia: 1 030 kW * Bendras tuščias svoris: 6 200 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperatūra: 230 °C, šildymo galia: 30 kW (40,79 AG), vidinis ilgis: 2 500 mm, vidinis plotis: 1 505 mm, ✈️ Plus shipping costs – shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy efficiency class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready for immediate use! ✳️Preserve your liquidity! We offer various financing options to ensure your investment has the best chance for success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder Curing Oven with Electric Heating System - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating power: 30 kW/h ✔️ Blower: 3000 m3/h, 80mmSS ✔️ Circulation fan power: 1.5 [kW/h] ✔️ Total: 35 kW/h ±10% ✔️ Digital temperature control, adjustable up to 220°C ✔️ Sandwich panels: Inside: 1.5 mm galvanized steel, Outside: 1.5 mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function adjustable ✔️ Signal tone sounds at the end of curing cycle ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet painting, plastics processing, or other thermal applications – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum flexibility for loading • Compatible with overhead rail systems • Optional shelf system available for small batch production _____ Djdpfowfgbrox Ag Ijkt ⚙️ Intelligent controls – tailored to your needs ✅ PID control (optional) for precise temperature management ✅ Touchscreen control panel & smartphone operation 📱 (optional) ✅ Weekly & monthly reports at the push of a button (optional) ✅ Timer function: freely programmable from 10 minutes up to 24 hours ⏲️ ✅ Automatic shut-off after process completion _____ ♨️ Ramp-heating mode (optional) Control temperature profile and holding times precisely, for example: • Reach target temperature within a defined time • Maintain desired temperature for set period • Controlled cooldown to target temperature • Automatic notifications for process events _____ 🛡️ Safety comes first 🟢 Safety sensor for overheating prevention 🟢 Automatic shut-off in case of fault 🟢 Acoustic warning signals on errors 🟢 Solvent & smoke extraction via automatic ventilation _____ ⚡ Customised energy & heating system 🔥 Also available as a high-temperature version up to 400°C (optional) _____ 🧠 No need for repeated settings! The oven stores your process parameters – batch by batch. This saves time and avoids mistakes. _____ 📢 And the best part: If you have special requirements – we also build custom ovens according to your specifications! Contact our expert team for personal consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. Dedpfjvz Hqgjx Ag Iekt A maximum of 20 meters of duct per outlet is allowed for air distribution.

Būklė: geras (naudotas), ašių konfigūracija: 3 ašys, leistina ašies apkrova (ašis 1): 9 000 kg, leistina ašies apkrova (ašis 2): 9 000 kg, leistina ašies apkrova (ašis 3): 9 000 kg, pirmoji registracija: 08/2016, bendras ilgis: 8 330 mm, bendras plotis: 2 470 mm, pakaba: oras, padangos dydis: 385/65R22.5, ratų bazė: 6 490 mm, spalva: juodas, Gamybos metai: 2016,