Flanšas

Kellenberger 600 U

Būklė: naudotas, Gamybos metai: 2000, Kellenberger 600 U Apvalaus šlifavimo staklės Būklė: Naudota Pagaminimo metai: 2000 Techniniai duomenys: Stalas: Atstumas tarp centrų: 600 mm Eiga: 900 mm Eiga už rankenėlės apsisukimą grubiai/smulkiai: 20 / 2,5 mm Eiga už padalos ant rankenėlės: 0,05 mm Greitis, hidrauliškai besikeičiantis: 0,02 - 6 m/min Persukimo eiga, mažiausia: 2,5 mm Laikymo laikas persukimo metu, reguliuojamas: 0 - 5 sek Pasukimo kampas: 11 laipsnių Dsdpfjy T E Rzsx Ai Sokn Skersinis stumoklis: Eiga reguliuojama rankenėle smulkiai/grubiai: 220 mm Eiga už rankenėlės apsisukimą grubiai/smulkiai: 8 / 1 mm/ø Padala rankenėlėje: 5 µm/ø Padala su mikroreguliavimu: 1 µm/ø Greita pirmyn/atgal eiga hidrauliškai: 40 mm Pateikimas hidrauliškai: 0,95 mm/ø Įgilinimo šlifavimas: įgilinimo greitis: 0,25 - 25 µm/sek Išilginis šlifavimas: padavimo kiekis per stalo persukimą: 1 - 30 µm/ø Šlifavimo veleno galvutė: Išorinio šlifavimo diskas: 400 x 50 x 127 mm

Būklė: geras (naudotas), Gamybos metai: 1997, Ref.-Nr.: 10619 Gamintojas: KELLENBERGER Tipas: 600 U Nr. 35 Metai: 1997 Valdymo tipas: Konvencinis Valdymas: n/a Sandėliavimo vieta: Halberstadt Kilmės šalis: Šveicarija Atstumas tarp centrų: 600 mm Djdpjya Dayofx Ai Sskn Centrų aukštis (standartinis): 125 mm Centrų aukštis su pakeltais darbiniais blokais (galvutė ir atramos taškas): 175 - 250 mm Didžiausias apsukimo diametras su pakėlimo blokais: 350 - 500 mm Stalo pasukimas / kiekviena pusė: 10 ° Stalo reverso laikas: 0-5 s Disko diametras / plotis / skylė: 250 x 13 x 76 mm Šlifavimo veleno greičiai: 1500 / 1700 / 2200 / 3600 Šlifavimo galva pasukama: 360° Šlifavimo galvos skersinė eiga: 285 mm Greitas šlifavimo galvos įtraukimas/atitraukimas: 40 mm Pertraukiamas padavimas kiekvienam stalo apsisukimui: 0,001 - 0,03 mm/skersmuo Darbo greičiai be laipsnių reguliuojami (normalus / specialus): 20-400 / 10-400 Maks. šlifavimo ilgis: 900 mm Papildoma informacija: Įrangą galima apžiūrėti prijungtą prie elektros tinklo.

Būklė: geras (naudotas), Gamybos metai: 2003, Ref. No.: 10618 Manufacturer: KELLENBERGER Model: 600 U No. 33 Year of manufacture: 2003 Control type: Conventional Dkjdpjya Dagsfx Ai Sjn Control system: n/a Location: Halberstadt Country of origin: Switzerland Distance between centers: 600 mm Center height (standard): 125 mm Center height with raised headstock and tailstock blocks: 175 - 250 mm Swing diameter with riser blocks, max.: 350 - 500 mm Table swivel (each side): 10° Table reversal dwell time: 0 - 5 sec Wheel diameter / width / bore: 250 x 13 x 76 mm Grinding spindle speeds: 1500 / 1700 / 2200 / 3600 rpm Grinding head swivel range: 360° Transverse travel of grinding head: 285 mm Rapid infeed and retraction of wheelhead: 40 mm Intermittent feed per table reversal: 0.001 - 0.03 mm/dia Micro-adjustment of feed, 1 division of dial: 0.001 mm / Ø Infinitely variable work speeds (normal / special): 20-400 / 10-400 Max. grinding length: 900 mm Additional information: The machine can be inspected under power.

Būklė: dilaminuotas dirbtuvėje (naudotas), KELLENBERGER 600 U 175 yra didelio tikslumo, tiksli ir patikima apskrito šlifavimo staklė. Pajėgumas: centre aukštis 175 mm, centre atstumas 600 mm; šlifavimo diskas Ø350×50 mm, skylė 127 mm; šlifavimo galvutė 270°. Techniniai duomenys: disko apsukos 1500–3600 aps./min (4 žingsniai); ruošinio velenas 20–400 aps./min (be pakopų); stalo pakrypimas 10°, iki 6 m/min; prijungimas 3×380 V 50 Hz; šlifavimo veleno variklis 4 AG; svoris ≈2200 kg; matmenys 3000×1750×1600 mm. Priedai: 2 ašių skaitmeninis indikatorius, centravimo galvutė su tiksliu reguliavimu, vidaus šlifavimo įranga, disko apsauga, apsauginis dangtis, slankiojamos durys. Tinka sandarioms tolerancijoms automobilių, laikrodžių, įrankių gamybos, aviacijos ir medicinos technikoje. Dksdpfx Aisyxn Duj Sen

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, centro aukštis: 125 mm, plotis centre: 600 mm, šlifavimo disko skersmuo: 400 mm, šlifavimo ratuko plotis: 50 mm, šlifavimo disko skylė: 127 mm, Nėra minimalaus kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! Variklis ir dažnio keitiklis ruošinio tekinimo galvutei buvo atnaujinti! Taip pat buvo atnaujinta valdymo spinta ir elektros schema! TECHNINIAI DUOMENYS Centru aukštis: 125 mm (175 mm su pakilimu) Centru atstumas: 600 mm Šlifavimo disko skersmuo: 400 mm Šlifavimo disko plotis: 50 mm Šlifavimo disko skylė: 127 mm Kampinis reguliavimas: 270° Ruošinio tekinimo galvutė: 20–400 aps./min Špindelio tvirtinimas: 5 MK Griebtuvėlio tvirtinimas: 3 MK Stalo kampinis reguliavimas: 10° Stalo greitis: iki 6,0 m/min STAKLIŲ DUOMENYS Išorinio šlifavimo disko variklis: 4,0 kW Ruošinio špindelio variklis: 2,2 kW Dkjdpsyu Rd Isfx Ai Sjn Matmenys ir svoris Matmenys (I x P x A): 2.580 x 1.680 x 1.670 mm Staklių svoris apie: 2.700 kg ĮRANGA Nauja valdymo spinta ir nauja elektros schema Naujas variklis ir dažnio keitiklis ruošinio tekinimo galvutei 2 ašių skaitmeninis atvaizdavimas Aušinimo bakas Geometrija pagal Kellenberger protokolą Platus priedų asortimentas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 900 mm, TECHNINĖS DETALĖS Maksimalus šlifavimo ilgis: 900 mm Atstumas tarp centrų: 600 mm Centrų aukštis (standartinis): 125 mm Centrų aukštis pakėlus galvutės ir griebiklio darbinį bloką: 175 - 250 mm Didžiausias pasukimo skersmuo su pakėlimo blokais: 350 - 500 mm Stalo pasukimas / kiekviena pusė: 10° Stalo apsisukimo užlaikymo laikas: 0 - 5 s Skersmuo / Plotis / Skylė: 250 x 13 x 76 mm Djdpjytf Tbjfx Ai Sokn Šlifavimo disko veleno greitis: 360 aps./min Šlifavimo galvos eigos judėjimas: 285 mm Greita galvos pirmyn ir atgal eiga: 40 mm Pertrūkis tiekiant kiekvienam stalo apsisukimui: 0,001 - 0,03 mm Mikroreuliatoriaus poslinkis, 1 ciferblato padala: 0,001 mm Darbo greičiai be pakopų reguliuojami (įprastas / specialus): 20 - 400 / 10 - 400 aps./min MAŠINOS DETALĖS Valdymo tipas: Konvencinis

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Dodsd Ih D Nopfx Ai Sskn Max. workpiece weight – flying: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in the field of Kellenberger overhaul/retrofit, we not only offer machines delivered in as-new condition and with warranty, but can also provide comprehensive service for your machines, fully refurbished to metric standards and newly painted. Version R: Machine features central lubrication and roller guideways in the X-axis flat way as well as air lift in the grinding headstock. -Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional equipment at extra cost: - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At this time, the machine tool does not comply with the fundamental safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum protection level must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Internal diameter: 340/440 mm Grinding depth: 99,999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workhead swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±10° Table longitudinal travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines refurbished to as-new condition with warranty, but also offer service for your machines. Warranty: 12 months from delivery—for Germany and neighboring countries. Pure internal cylindrical grinding machine with stepless adjustable drive (0–100%). Available in current RAL colors! Standard centre height 175 mm, extendable to 225 mm. Dedpfx Ajd Ih Dxei Sekn Fixed internal grinding spindle with belt tension via tension pulley! Z-axis reversing accuracy max. 0.01 mm! Geometrically overhauled and newly painted, with: - New electrical cabinet. - New three-phase workpiece spindle motor and controller. - 2-axis digital readout, X-axis resolution 0.5 μm. Options: - Encoder with digital display in the workhead - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm Includes: - Operating tools Further accessories on request. The machine tool currently does not meet the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The minimum required safety level must be determined by means of a risk assessment pursuant to BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivels: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – between centres: 130 kg incl. clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m Machine completely overhauled according to Kellenberger standards. - Workpiece spindle drive utilises modern three-phase technology Djdpfxjd Ih D Rj Ai Sskn - 2-axis digital readout. X-axis resolution: 0.5 µm Optional extras (available at additional cost): - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (not compatible with height adjustment via spindle) - New, robust internal grinding device, diameter 80 mm or 100 mm, with height adjustment - Centre height increase up to max. 225 mm - Variable speed control for grinding spindle Included accessories: - Operating tools - Collet tube for chuck Further accessories available on request.

Būklė: naudotas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Center height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180 ± ° Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg (including clamping) Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhaul/retrofit, we not only deliver machines in as-new quality with warranty, but also provide service for your machines, metrically overhauled and freshly painted. Photo shows a machine already delivered, possibly with different options. Machine is equipped standard with central lubrication and roller guides in the X-axis flatway, as well as air lift-off in the grinding headstock. Dodped Ih D Eefx Ai Sskn BEMA Standard Equipment: - Digital readout in 2 axes. X-axis resolution: 0.5 μm - Grinding spindle speed display - Infinitely variable grinding spindle speed 70–100% - Infinitely variable internal grinding spindle speed 70–100% - Workpiece spindle drive powered by three-phase motor, infinitely variable via frequency converter Available options at extra cost: - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (height adjustment via spindle not possible) - Sine bar - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase center height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid in neighboring countries only). Further accessories on request. The machine tool does not currently comply with the essential health and safety requirements as set out in BetrSichV 2015. An assessment of the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.