Cilindrinio šlifavimo staklės

KELLENBERGER 600 U Nr. 36

Būklė: geras (naudotas), Magnetic table 455 x 170 mm Digital readout Water tank Dressing device Nedpfx Acotu Il Tsajwi Wet grinding unit

Būklė: naudotas, Radial drilling machine CSEPEL Type RFh 75 / 1500 Machine No. 13704 Year of manufacture: 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle taper MT 5 Nominal arm reach 1500 mm Maximum spindle reach 1500 mm (to column) Minimum spindle reach 440 mm (to column) Distance spindle nose – clamping surface 370 - 1700 mm Vertical adjustment of arm 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Quill stroke 380 mm Spindle speed 19–1900 rpm, 21 steps Feed rate 0.047–2 mm/rev, 12 steps Motor power 11 kW Power supply 380 Volt, 50 Hz, 15 kW - Spindle clockwise/anticlockwise operation via hand lever switch - Hydraulic gearshift for spindle speed and feed rate - Hydro-mechanical central clamping - Motorized vertical arm adjustment - No coolant system - Machine lamp - Operating manual included Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 t Good condition Nwsdpfx Aelhwr Rocaji

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module – max. 0.5 – 10 Pressure angle 15 – 25° Speed 2800 rpm Total power requirement 0.4 kW Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Finishing and re-profiling on the following models: NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM,... Right adjustment plate with micrometer screw adjustment, axial Njdpfjvibc Hox Acajwi Left adjustment plate with micrometer screw adjustment, radial 2 precision motor spindles for mounting diamond wheels.

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Nodpfeh Nypfox Acaswi

Gamybos metai: 1955, būklė: naudotas, Radial drilling machine, drill press, radial arm drilling machine - Arm reach: 2055 mm - Max. distance from machine table to spindle mount: 1700 mm Nwjdpfx Acod Enr Ieasi - Taper: MT5 - Motor power: 7.5 kW - Spindle speeds: 11.2–1400 rpm - Column diameter: Ø 450 mm - Spindle stroke: 540 mm - Thread cutting device - Automatic feed: 0.037–2.0 mm/rev - Clamping area: 920 x 1600 mm - Dimensions: 2580/1110/H3450 mm - Weight: 6465 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 055 - 030.0221, Complete overhaul Nwedpfx Acozbaz Aoaoi Year 2003 – Fanuc 16i-T Centre height 175 mm, between centres 650 mm 2 external grinding wheels + fine B-axis Country of manufacture: Switzerland Voltage: 3x400V Dimensions: 3680 x 2165 x 2100 mm Net weight of machine: 5500 kg TECHNICAL SPECIFICATIONS Centre height: 175 mm Between centres: 650 mm LONGITUDINAL SLIDE (Z) Max travel: 800 mm Feed rate: 0.001 – 10,000 mm/min Resolution: 0.0001 mm CROSS SLIDE (X) Max travel: 254 mm / SPW 650 Feed rate: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Maximum workpiece weight (between centres): 80 kg TAILSTOCK Taper: Morse 3 Quill: Ø 50 mm Quill stroke: 35 mm UNIVERSAL GRINDING WHEEL HEADSTOCK Left wheel dimensions: 500 x 80 x 203 mm Right wheel dimensions: 400 x 80 x 203 mm Grinding wheel headstock power: 12.5 kW Rotational speed: 3,200 rpm Programmable cutting speed up to: 50 m/s B-axis stroke: -15° to +195° B-axis indexing accuracy: 0.0001° LEFT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1-1000 rpm C-axis indexing accuracy: 0.001° RIGHT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1-1000 rpm C-axis indexing accuracy: 0.001° Hydraulic feed with pressure control Unless stated otherwise, the technical data provided are not binding and subject to errors or omissions. Stock no. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Fully overhauled: Mechanical, geometry, hydraulics, and electrical parts (checked and/or replaced) Grinding wheel headstock: Disassembled, parts cleaned, worn and defective parts replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced + adjusted. New paintwork. Workhead: Disassembled, parts cleaned, worn and defective parts replaced, motor overhauled, belts replaced. New spindle bearings. New paintwork. Tailstock: Disassembled, checked and overhauled Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic manifold checked. X-axis: Disassembled, worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, tables ground. Z-axis: Disassembled, tables ground, worn and defective parts replaced, hydraulic piston overhauled, new paintwork. Electrical cabinet: Fully checked, various relays replaced. Paintwork: Colours: White RAL 9003 and grey RAL 7011 Geometry adjusted according to manufacturer protocol. Various accessories checked and cleaned.

Būklė: naudotas, Technical Data Faceplate diameter: 1580 mm Maximum turning diameter: 1700 mm Maximum turning height (cross rail tool post): 1250 mm Maximum turning height (side tool post): 1160 mm Maximum faceplate load: 12,000 kg Maximum distance from faceplate to lower edge of cross rail: 1210 mm Maximum distance from faceplate to lower edge of side tool holder: 980 mm Maximum distance from faceplate to lower edge of turret head: 1420 mm 18 spindle speeds: 2.8 - 140 rpm 18 feed rates: 0.063 - 3.15 mm/rev Total power requirement: 55 kW Space requirement (approx.): 5300 x 3500 x 4100 mm Control: conventional Nsdpjwyn Ntefx Acaswi

Būklė: beveik kaip naujas (naudotas), DN Solutions PUMA DNT2600L 2024 metų modelis – tik 32 pjovimo valandos (beveik naujos būklės) Griebtuvai: 12 colių Didžiausias tekinimo skersmuo: 460 mm Didžiausias tekinimo ilgis: 1078 mm Veleno kiaurymė: 81 mm Veleno greitis: 3 500 aps./min. Pagrindinio variklio galia: 26 kW Maksimalus sukimo momentas: 735 Nm X ašies eiga: 260 mm Z ašies eiga: 1100 mm Nwedpfx Acoy D E Rijaji Greita eiga: X 24 m/min – Z 30 m/min Revolveris: 12 pozicijų Kreipiančiųjų sistema: Dėžinė kreipiančioji Staklių svoris: 4 900 kg Būklė: 2024 metų modelis, tik 32 pjovimo valandos, beveik kaip naujas.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2022, valdiklių gamintojas: HAAS, veleno greitis (maks.): 12 000 aps./min, Šis 3 ašių HAAS VF-2SSYT su padėklų baseinu 3+1 buvo pagamintas 2022 m. Jame įrengtas 30 AG, 22,4 kW galios linijinis suklys, galintis pasiekti 12 000 apsukų per minutę, ir 50+1 įrankių keitiklis. Jame yra 15 colių ekranas ir 3+1 padėklų baseinas su 900x450 mm dydžio padėklais. Jei ieškote aukštos kokybės frezavimo galimybių, apsvarstykite mūsų parduodamas HAAS VF-2SSYT stakles. Susisiekite su mumis ir gaukite daugiau informacijos. Mašinos privalumai Techniniai mašinos privalumai • Įrankių keitiklis: 50+1 įrankių keitiklis • Papildomas aušinimo skystis: Papildoma aušinimo sistema: 360 litrų • Padėklų baseinas: 3+1 padėklų baseinas su 900x450 padėklų Nwedox Hbluepfx Acasi • 21 baro lovio suklys • 15 colių ekranas Papildoma informacija Mašina vis dar maitinama

Būklė: labai geros būklės (naudotas), Su skaitmeniniu ekranu Su vidinio šlifavimo įtaisu Nodpfszhmfysx Acaowi Centruotės aukštis 240 mm Atstumas tarp centrų 2500 mm Šlifavimo diskas 750 x 200 x 305 Šlifavimo disko apsisukimai 890 / 1 120 aps./min. Ruoinio velenas pasukamas 90° Galinis centras konusas MK5 Įvairūs priedai MARCELS MASCHINEN AG