Flanšas

Kellenberger 600 U

Būklė: geras (naudotas), Gamybos metai: 2001, Ref.-Nr.: 10617 Gamintojas: KELLENBERGER Tipas: 600 U Nr. 36 Pagaminimo metai: 2001 Valdymo tipas: Konvencinis Valdymas: n/a Vieta sandėlyje: Halberstadt Kilmės šalis: Šveicarija Cgodpfx Asya Daajahep Atstumas tarp centrų: 600 mm Centrų aukštis (standartinis): 125 mm Centrų aukštis pakėlus darbinius blokus, galvutė ir griebtuvas: 175-250 mm Didžiausias apsukimo skersmuo su pakėlimo blokais: 350 - 500 mm Stalo pasukimas / kiekviena pusė: 10° Stalo reverso užlaikymo laikas: 0 - 5 sek. Skersmuo / plotis / skylė: 250 x 13 x 76 mm Šlifavimo veleno greičiai: 360° Šlifavimo galvos skersinė eiga: 285 mm Greitas šlifavimo galvos įstūmimas/ištraukimas: 40 mm Pertrūkis įstūmimas per stalo apsisukimą: 0,001 - 0,03 mm/dia Mikroreguliatorius, 1 ciferblato padala: 0,001 mm/Ø Darbo greičiai nenutrūkstamai reguliuojami (normalus / specialus): 20 - 400 / 10-400 Maks. šlifavimo ilgis: 900 mm Papildoma informacija: Įrenginį galima apžiūrėti prijungtą (po įtampa).

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, centro aukštis: 125 mm, plotis centre: 600 mm, šlifavimo disko skersmuo: 400 mm, šlifavimo ratuko plotis: 50 mm, šlifavimo disko skylė: 127 mm, Variklis ir dažnio keitiklis ruošinio spindelio atramai buvo atnaujinti! Taip pat buvo atnaujinta valdymo spinta ir elektros schema! TECHNINĖS DETALĖS Didžiausias atstumas nuo centro iki pagrindo: 125 mm (su pakeliamais blokais – 175 mm) Didžiausias atstumas tarp centrų: 600 mm Šlifavimo disko skersmuo: 400 mm Šlifavimo disko plotis: 50 mm Šlifavimo disko kiaurymė: 127 mm Kampinis reguliavimas: 270° Ruošinio spindelio greitis: 20 – 400 aps./min Spindelio kūgis: 5 MK Atraminio centro kūgis: 3 MK Stalo kampinis reguliavimas: 10° Stalo greitis: iki 6,0 m/min STAKLIŲ DUOMENYS Išorinio šlifavimo disko variklis: 4,0 kW Ruošinio spindelio variklis: 2,2 kW Matmenys ir svoris Išmatavimai (I x P x A): 2.580 x 1.680 x 1.670 mm Cgodpfx Aasyb R Nqjhop Staklių masė apie: 2.700 kg ĮRANGA Nauja valdymo spinta ir nauja elektros schema Naujas variklis ir dažnio keitiklis ruošinio spindelio atramai 2 ašių skaitmeninis indikatorius Aušinimo rezervuaras Geometrija pagal Kellenberger protokolą Platus priedų komplektas

Būklė: geras (naudotas), Gamybos metai: 1997, Ref. Nr.: 10619 Gamintojas: KELLENBERGER Cgjdpfoya Dayex Aahjp Tipas: 600 U Nr. 35 Pagaminimo metai: 1997 Valdymo tipas: Konvencinis Valdymas: n/a Sandėliavimo vieta: Halberstadt Kilmės šalis: Šveicarija Atstumas tarp centrų: 600 mm Centrų aukštis (standartinis): 125 mm Centrų aukštis pakeliant darbo blokus galvutėje ir grąžte: 175 - 250 mm Maksimalus sūpynės skersmuo su pakėlimo blokais: 350 - 500 mm Stalo pasvirimas / į kiekvieną pusę: 10° Stalo apsisukimo uždelsimo laikas: 0-5 sek. Disko skersmuo / plotis / skylė: 250 x 13 x 76 mm Šlifavimo disko veleno greičiai: 1500 / 1700 / 2200 / 3600 Šlifavimo galvutė pasukama: 360° Šlifavimo galvutės skersinis judesys: 285 mm Ratų galvutės greitas įstūmimas/ištraukimas: 40 mm Pertraukiamas padavimas vienam stalo apvertimui: 0,001 - 0,03 mm/aps. Darbiniai greičiai be pakopų reguliuojami (normalūs / specialūs): 20-400 / 10-400 Maks. šlifavimo ilgis: 900 mm

Būklė: geras (naudotas), Gamybos metai: 2003, Ref. Nr.: 10618 Gamintojas: KELLENBERGER Tipas: 600 U Nr. 33 Pagaminimo metai: 2003 Valdymo tipas: Konvencinis Valdymas: n/a Sandėliavimo vieta: Halberštatas Kilmės šalis: Šveicarija Atstumas tarp centrų: 600 mm Centrų aukštis (standartinis): 125 mm Centrų aukštis naudojant kėlimo blokus galvai ir atraminiam centrui: 175 - 250 mm Didž. sūpynės skersmuo su kėlimo blokais: 350 - 500 mm Stalo pasukimas / į kiekvieną pusę: 10° Stalo reverso užlaikymo laikas: 0 - 5 sek Šlifavimo rato skersmuo / plotis / skylė: 250 x 13 x 76 mm Šlifavimo veleno greičiai: 1500 / 1700 / 2200 / 3600 Šlifavimo galva pasukama: 360° Šlifavimo galvos šoninis judėjimas: 285 mm Šlifavimo galvos greitas priartinimas ir atitraukimas: 40 mm Pertraukų paduoda vienam stalo reversui: 0,001 - 0,03 mm/skersmens Cgsdpsya Dagjfx Aahsp Padavimo mikrokorektorius, 1 ciferblato padala: 0,001 mm / Ø Darbiniai greičiai bepakopiai (normalus / specialus): 20-400 / 10-400 Didž. šlifavimo ilgis: 900 mm

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Cgsdpfxew U Ry Ne Aahop Workpiece headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, overhauled. Hydraulics Disassembled, motor check, replacement of hoses, defective and worn parts. Hydraulic block inspected. X Axis Disassembly, replacement of worn parts such as O-rings, seals, rings, etc., overhaul of hydraulic piston, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical cabinet Complete inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer’s protocol. Inspection and cleaning of various accessories. Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff number 8460.2920 TECHNICAL SPECIFICATIONS Nominal centre distance 600 mm Max. centre distance (extended headstock) 750 mm Centre height, standard 125 mm Centre height with interchangeable shoes for headstocks 175 to 250 mm Max. workpiece diameter (125 mm centre height) 250 mm Max. workpiece diameter with interchangeable shoes 350 to 500 mm Table swivelling in either direction 10° Max. length for surface grinding (max. width = 200 mm) 900 mm Table speed with continuously variable hydraulic control up to approx. 6 m/min Table reversal dwell time 0-5 sec. Wheel for external grinding, diameter-width-bore 400x50x127 mm Wheel for surface grinding 250x13x76 mm Grinding spindle speeds 1500/1700/2200/3600 rpm Grinding headstock swivel 270° With index every 90° Vertical movement of grinding headstock, centre height 125-350 mm Cross travel of grinding headstock 285 mm Hydraulic rapid advance/retract stroke 40 mm Intermittent feed of the wheel by table reversal 0.001-0.03 mm/dia Continuous plunge grinding feed 0-0.9 mm/dia Micrometric feed stop, graduated 0.001 mm/dia Workpiece headstock swivel 360° Continuously variable workpiece spindle speed, standard/special 20-400 / 10-400 rpm Workpiece headstock/tailstock internal taper 5/3 Morse Grinding headstock motor, approx. 4 HP All technical details are given without obligation and subject to errors or omissions.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 32461/2384, Origin of manufacture: Switzerland Voltage: 380 / 50 / 3 (V/Hz/Ph) Net weight: 2200 kg TECHNICAL DATA Nominal distance between centres: 600 mm Maximum distance between centres (workpiece spindle stock and tailstock retracted): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plate (workpiece spindle and tailstock): 175 → 250 mm Maximum possible swing diameter (125 mm centre height): 250 mm Maximum possible swing diameter with intermediate plates: 350 → 500 mm Table swivelling range, each side: 10° Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically and steplessly adjustable: approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds (rpm): 1500 / 1700 / 2200 / 3600 Swiveling range of grinding spindle headstock: 270°, lockable every 90° Vertical travel of grinding spindle headstock (centre height): 125–350 mm Cross travel of grinding slide: 285 mm Hydraulic rapid advance and return of grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev Feed amount for plunge grinding: 0–0.9 mm/rev Micro stop for feed per division: 0.001 mm/rev Swiveling range of workpiece spindle stock: 360° Workpiece spindle speeds, steplessly adjustable normal/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5/3 Cgodpfx Asd Amifsahsp Grinding spindle motor, approx.: 4 HP Errors and omissions excepted. Technical data provided without obligation. Inventory No. 2170089, Machine Accessories List: 1 workpiece spindle headstock MK5 1 sine bar without dial comparator 1 grinding spindle headstock with 4 drive pulleys 1 tailstock MK3 1 collet draw system with collet and reducing sleeve B32 1 internal grinding attachment with Fischer quill UJ50x250 – drive pulley Ø 48 for 14,000 rpm 1 rotatable disc dressing device with 50 mm base 1 table rotation stop without comparator 1 coolant system by decantation 1 ejector 1 balancing bar

Būklė: naudotas, TECHNINIAI DUOMENYS - Atstumas tarp centrų: 600 [mm] - Centrinės aukštis: 175 [mm] - Stalo orientacija: 11 [°] UNIVERSALUS ŠLIFAVIMO DISKO LAIKIKLIO VERŽLIARAKTIS - Kairiojo šlifavimo disko matmenys: 400 x 50 x 127 [mm] - Dešiniojo šlifavimo disko matmenys: 225 x 20 x 76,2 [mm] - Variklio galia: 3 [kW] - Veleno greitis: 1500 / 1700 / 2200 Cjdeuhbywspfx Aahegp - Šlifavimo disko laikiklio veleno orientacija: 270 [°] DETALĖS LAIKIKLIO VERŽLIARAKTIS - Detalės laikiklio veleno orientacija: 360 [°] - Veleno greitis: 20 - 400 [aps./min] - Vidinis kūgis: Morse 5 - Variklio galia: 0,9 [kW] PRIEŠVELENIS - Vidinis kūgis: CM4 - Pinolės eiga: 30 [mm] MATMENYS - Užimamas plotas: 2580 x 1680 [mm] - Aukštis: 1670 [mm] - Svoris: 2200 [kg] PRIEDAI - FISCHER vidinis gręžimo velenas: 14.000 [aps./min]

Būklė: dilaminuotas dirbtuvėje (naudotas), KELLENBERGER 600 U 175 yra didelio tikslumo, tiksli ir patikima apskrito šlifavimo staklė. Pajėgumas: centre aukštis 175 mm, centre atstumas 600 mm; šlifavimo diskas Ø350×50 mm, skylė 127 mm; šlifavimo galvutė 270°. Techniniai duomenys: disko apsukos 1500–3600 aps./min (4 žingsniai); ruošinio velenas 20–400 aps./min (be pakopų); stalo pakrypimas 10°, iki 6 m/min; prijungimas 3×380 V 50 Hz; šlifavimo veleno variklis 4 AG; svoris ≈2200 kg; matmenys 3000×1750×1600 mm. Priedai: 2 ašių skaitmeninis indikatorius, centravimo galvutė su tiksliu reguliavimu, vidaus šlifavimo įranga, disko apsauga, apsauginis dangtis, slankiojamos durys. Tinka sandarioms tolerancijoms automobilių, laikrodžių, įrankių gamybos, aviacijos ir medicinos technikoje. Cgedsxx U H Tspfx Aahjp

Būklė: naudotas, Internal diameter: 340/440 mm Grinding depth: 99,999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workhead swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±10° Table longitudinal travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines refurbished to as-new condition with warranty, but also offer service for your machines. Warranty: 12 months from delivery—for Germany and neighboring countries. Pure internal cylindrical grinding machine with stepless adjustable drive (0–100%). Available in current RAL colors! Standard centre height 175 mm, extendable to 225 mm. Fixed internal grinding spindle with belt tension via tension pulley! Z-axis reversing accuracy max. 0.01 mm! Geometrically overhauled and newly painted, with: - New electrical cabinet. - New three-phase workpiece spindle motor and controller. Cgedpfjd Ih Dxjx Aahjp - 2-axis digital readout, X-axis resolution 0.5 μm. Options: - Encoder with digital display in the workhead - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm Includes: - Operating tools Further accessories on request. The machine tool currently does not meet the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The minimum required safety level must be determined by means of a risk assessment pursuant to BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in the field of Kellenberger overhaul/retrofit, we not only offer machines delivered in as-new condition and with warranty, but can also provide comprehensive service for your machines, fully refurbished to metric standards and newly painted. Version R: Machine features central lubrication and roller guideways in the X-axis flat way as well as air lift in the grinding headstock. Cgedpfxed Ih D Nj Aahop -Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional equipment at extra cost: - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At this time, the machine tool does not comply with the fundamental safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum protection level must be determined by means of a risk assessment according to BetrSichV.