Suvirinimo stalas

kein Demmeler Siegmund Protec Lochtisch

Būklė: naujas, Table length 2400 mm Table width 1200 mm Table height (side panel) 200 mm Weight 981 kg Space requirement approx. 2400 x 1200 mm AUTHORIZED SIEGMUND DEALER – All items available! Product Description - Fully hardened tool steel X8.7 + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Side panel made of high-grade steel S355J2+N + plasma nitrided - Borehole Ø 28 mm - Surface boreholes in 100x100 mm grid - Corners, edges, and boreholes rounded - Side panel height 200 mm - Diagonal grid holes in the side panel - Including surface scale - Ribbed construction for increased strength - Grid lines enable precise setups Welding tables are equipped with a scale as standard. Lsdpfx Asxab Rnjlrsad Plasma-nitrided version: - Protection against rust / scratches / adhesion of welding spatter - Corrosion-resistant / higher load capacity Equipment: - Ø28 mm hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided "Extreme" version with scale - Side panel with diagonal grid - Including 4x standard feet

Būklė: naujas, Gamybos metai: 2025, - Horizontal capacity 500 kg - Vertical capacity 250 kg - Table size 560 mm Lasdjgg Rb Tjpfx Alrod - Door left 170 mm - Electrically tiltable - Foot pedal - Documentation - 230V

Būklė: naujas, The perfect layer for long-lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder consisting of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface and forms a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and pre-treated. Oils, contaminants and other impurities are removed to ensure a clean surface. This is crucial for the powder to bond effectively with the substrate, resulting in a robust and long-lasting finish. Components of a Powder Coating System A powder coating system typically consists of various components and equipment necessary for the application and curing of powder coatings. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Supply System The powder supply system comprises a hopper or container to store the coating powder. It typically includes equipment such as powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pretreatment Equipment Pretreatment systems prepare the substrate before the powder coating is applied. This includes processes such as cleaning, degreasing, rinsing, and surface treatment, to ensure good adhesion and durability of the coating. 🧼 Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder coating to melt, flow and cure to form a durable finish. The oven typically consists of a conveyor system or racks for transporting coated parts through the oven chamber. 🔥 Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a solution for powder coating? Seeking a custom powder coating solution? We specialize in delivering tailored powder coating solutions to meet your individual requirements. Whether you have specific color requirements, intricate designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements and let us develop a custom powder coating solution for you. 📞 Contact us today! Ledpfx Aoun Sd Uslrsad

Gamybos metai: 1990, būklė: naudotas, mašinos/transporto priemonės numeris: 9072492, Nominal power: 100 kVA Outreach: 500 mm Lsdpfx Ajz H Dyolroad Electrode arm spacing: 330 - 500 mm electrical connection: 400 V kW Space requirements: 700 x 1420 x 2000 mm Weight: 750 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Naudota automatinė hidraulinė juostinė metalo pjovimo staklė MEP SHARK 332 NC EVO Juostos matmenys: 3320x27x0,9 mm Pjovimo kampas: nuo 45° iki +60° Darbo režimai: rankinis, pusiau automatinis-dinaminis, pusiau automatinis, automatinis Pjovimo greitis: 15-100 m/min (inverteris) Pjovimo pajėgumas: prie 0° – apvalus 300 mm – kvadratinis 260 mm – stačiakampis 330x260 mm Matmenys: 2600x2320x2000 mm Lasdpfxjul Svlj Alred Pagaminimo metai: 2011 Svoris: 1050 kg Įrenginys yra pilnai atnaujintas ir patikrintas.

Būklė: naujas, Table length: 1220 mm Table width: 760 mm Table height: 910 mm Weight: 226 kg Nitrided welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. The workbench features an interchangeable, robust tabletop that accommodates all TM fixture components with a bore diameter of approximately 1.6 cm. This allows you to create the ultimate, high-performance, compact mobile workstation. Expand your clamping and positioning options and be ready for new projects with the GERD WOLFF Welding Table Workbench + Fixture Set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for clamping and positioning during welding and fabrication. Clamp and position at any point on the reversible, double-sided, precision ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop for accurate setups every time. Technical Specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Tabletop flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture Set (5/8 inch = 1.5875 cm) 2 x Inserta Clamps, suitable for 1.5875 cm holes (UDN5150) 2 x Side Clamps, suitable for 1.5875 cm holes 2 x Inserta Pliers, suitable for 1.5875 cm holes (PTT522K) 2 x Inserta Pliers, suitable for 1.5875 cm holes (PTT634K) 2 x Magnetic V-Pads for the tabletop 2 x Locating Pins, suitable for 1.5875 cm holes 2 x Angle Brackets, 1.5875 cm holes (T50305) 2 x Angle Brackets, 1.5875 cm holes (T50304) 4 x Stops, suitable for 1.5875 cm holes (T54203) 4 x Stops, suitable for 1.5875 cm holes (T54205) 4 x V-Block Spacers, suitable for 1.5875 cm holes 8 x D-Stop Bars, 1.5875 cm holes Lodpfx Aljxqrhlsrjad 8 x V-Blocks, suitable for 1.5875 cm holes 10 x Ball-Lock Bolts, suitable for 1.5875 cm holes 12 x Magnetic Support Pins

Būklė: naujas, Table diameter: 490 mm Table load: 300/150 kg Swivel range: 0-90° manual Table load horizontal: 300 kg Table load vertical: 150 kg Bore diameter: 65 mm Table rotation speed: 0.4 - 4.0 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight approx. 0.1 t Space requirement approx. 0.5 x 0.52 x 0.5 m The D-DWP welding positioners are equipped with a through-hole in the turntable, greatly expanding your options for flexible positioning and rotary welding of your component. This is particularly advantageous for welding with backing gas. Using these tilt-rotary tables can boost production rates and further improve product quality. Thanks to their compact design, the D-DWP series can be integrated into any existing production facility in a space-saving manner. Laodpfxjgvkkts Alred Features: - Foot pedal included - Infinitely variable speed control - Very high stability – compact model - Through-hole in turntable - CE marking

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Lakštų plotis 1550 mm Lakštų storis 6,5 mm Lenkimo spindulys 4,5 mm Viršutinio volo skersmuo 150 mm Šoninio volo skersmuo 130 mm Apatinio volo skersmuo 150 mm Didžiausias atstumas tarp viršutinio ir apatinio volo 20,0 mm Bendras energijos poreikis 2,2 + 1,5 kW Staklių svoris apie 2370 kg. Matmenys (I x P x A) 3300 x 1150 x 1110 mm Demonstracinė staklė – NAUJA Nenaudota (!!) Speciali kaina pagal užklausą Įranga: - Elektrohidraulinė 4 volų lakštų lankstymo staklė * su varomais viršutiniu ir apatiniu volais * tvirta suvirinta konstrukcija - Pritaikymo sritis: * nuo lengvos iki sunkios lakštų apdirbimo (plienas/ALU/nerūdijantis plienas) - Apatinio ir šoninių volų elektrohidraulinis reguliavimas - Šoninių volų linijinis vedimas Lodpfsxabkbjx Alread - Viršutinis volas varomas galingu elektros varikliu ir planetine pavara - Laisvai judantis atskiras valdymo pultas - Grūdinti volai SAE 1050 (CK 45), su išgaubimu - Kūginio lankstymo įtaisas - 3 ašių skaitmeninis indikatorius tiksliam volų padėties nustatymui - Elektrohidraulinis atverčiamas guolis - Naudojimo instrukcija (PDF)

Gamybos metai: 2023, būklė: naujas, ! Mašinų pasiūlymas klientams Lietuvoje / Latvijoje / Estijoje. LVD PHOENIX – tai šviesolaidinis lazerinio pjovimo įrenginys, kuris išsiskiria dideliu dinamizmu ir lankstumu pjaunant storas medžiagas. PHOENIX gali būti kelių dydžių: 3 m x 1,5 m, 4 m x 2 m ir 6 m x 2 m. Lazerio galingumas – nuo 4 kW iki 20 kW. Standartinėje komplektacijoje įranga turi automatinį šaibų keitimo stalą, pjovimo galvą, adaptyvų kolimatoriaus bloką (iki 12 kW), talpinį aukščio jutiklį, automatinį antgalių valymą, automatinį lakštų referavimą, automatinį pjovimo dujų pasirinkimą (deguonis, azotas, suslėgtas oras), šaldytuvą ir dūmų ištraukimo sistemą, SIEMENS valdymo pultą. PHOENIX lazeriniai pjovimo įrenginiai suderinami su plataus spektro automatizavimo sprendimais, tokiais kaip lakštų pakrovimo / iškrovimo ir sandėliavimo sistemos (iki 6 m), purkštukų keitiklis. Laedpsiy N Npofx Alrjd Šaibų keitimo stalas Visi PHOENIX lazeriai standartiškai komplektuojami su automatiniais šaibų keitimo stalais. Stalo aukštis – 930 mm. Stalo pakeitimo greitis priklauso nuo įrenginio dydžio: 3015 – 35 sek., 4020 – 39 sek., 6020 – 48 sek. 4020 ir 6020 modelių stalai suskaidyti į 2 m x 1 m segmentus, todėl juos lengva pakeisti. Pjovimo galva PHOENIX lazerių galingumas – nuo 4 iki 20 kW (galimi variantai: 4kW, 6kW, 10kW, 12kW, 20kW). 4–12 kW lazeriams pjovimo galva komplektuojama su 150 arba 200 mm fokusavimo objektyvu, o 20 kW galingumo lazeriams naudojamas 250 mm fokusavimo objektyvas. Rėmas PHOENIX 3015 modelis turi suvirintą plieninį monoblokinį rėmą, leidžiantį pasiekti didelius pagreitėjimus neprarandant tikslumo. Dėl rėmo standumo papildamų pamatų nereikia. PHOENIX 4020 ir 6020 modelių rėmai sudaryti iš 4 dalių: tvirto kairiojo ir dešiniojo rėmo, kurie sujungti dviem varžtiniais sijomis.

Būklė: naujas, Gamybos metai: 2024, Durchmesserbereich: 15–240 mm Ladelänge: 100–6000 mm Entladelänge: 350–3000 mm Ladekapazität: Bis zu 300 kg Laserleistung: 1.500–6.000 W X/Y-Positioniergenauigkeit: ±0,03 mm/m X/Y-Wiederholgenauigkeit: ±0,02 mm/m Maximale Verfahrgeschwindigkeit: 113 m/min Maximale Beschleunigung: 0,65 G CNC-Steuerungssystem: FSCUT 5000 Zytkwovg EtherCAT-Bus Lsdpfxonkal De Alroad Stromversorgung: 380 V, 50 Hz, Dreiphasen Leistungsaufnahme: abhängig von der Laserleistung Schutzart der Stromversorgung: IP54